Download or read book Continuum Mechanics of Single Substance Bodies written by A. Cemal Eringen and published by Academic Press. This book was released on 2013-10-22 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuum Physics, Volume II: Continuum Mechanics of Single-Substance Bodies discusses the continuum mechanics of bodies constituted by a single substance, providing a thorough and precise presentation of exact theories that have evolved during the past years. This book consists of three parts—basic principles, constitutive equations for simple materials, and methods of solution. Part I of this publication is devoted to a discussion of basic principles irrespective of material geometry and constitution that are valid for all kinds of substances, including composites. The geometrical notions, kinematics, balance laws, and thermodynamics of continua are also deliberated. Part II focuses on materials consisting of a single substance, followed by a general theory of constitutive equations and special types of bodies. The thermoelastic solids, thermoviscous fluids, and memory-dependent materials are likewise considered. Part III is devoted to a discussion of a variety of nonlinear and linear problems, as well as nonlinear deformations of elastic solids, viscometric fluids, singular surfaces and waves, and complex function technique. This volume is a good source for researchers and students conducting work on the continuum mechanics of single-substance bodies.
Download or read book Continuum Mechanics written by Fridtjov Irgens and published by Springer Science & Business Media. This book was released on 2008-01-10 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction into the entire science of Continuum Mechanics in three parts. The presentation is modern and comprehensive. Its introduction into tensors is very gentle. The book contains many examples and exercises, and is intended for scientists, practitioners and students of mechanics.
Download or read book Continuum Mechanics of Single Substance Bodies written by Ahmed Cemal Eringen and published by . This book was released on 1975 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuum Mechanics of Single-Substance Bodies ...
Download or read book The Thermodynamics of Linear Fluids and Fluid Mixtures written by Miloslav Pekař and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, Samohýl and Pekař offer a consistent and general non-equilibrium thermodynamic description for a model of chemically reacting mixtures. This type of model is frequently encountered in practice and up until now, chemically reacting systems (out of equilibrium) have rarely been described in books on non-equilibrium thermodynamics. Readers of this book benefit from the systematic development of the theory; this starts with general principles, going through the applications to single component fluid systems, and finishing with the theory of mixtures, including chemical reactions. The authors describe the simplest mixture model – the linear fluid – and highlight many practical and thermodynamically consistent equations for describing transport properties and reaction kinetics for this model. Further on in the book, the authors also describe more complex models. Samohýl and Pekař take special care to clearly explain all methodology and starting axioms and they also describe in detail applied assumptions and simplifications. This book is suitable for graduate students in chemistry, materials science and chemical engineering as well as professionals working in these and related areas.
Download or read book Material Substructures in Complex Bodies written by Gianfranco Capriz and published by Elsevier. This book was released on 2007-05-24 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stringent industrial requirements of sophisticated performances and of circumstantial control for micro-devices or nanotechnology manufactures, and other types of machinery at multiple scales, can be satisfied often only by resort to or allowance for complex materials. The adjective 'complex' beckons to the fact that the substructure influences gross mechanical behaviour in a prominent way and interactions due to substructural changes are represented directly. The description of the mechanical behaviour of complex bodies proposes a wide class of challenging problems from macroscopic-to-nano-world. The collection of chapters composing this book aims to explore some aspects of these problems, proposing also new matter of discussion together with specific solutions. Contributors are Carlo Cercignani, Gianfranco Capriz, Pierre Degond, Antonio Fasano, Harley T. Johnson, Sukky Jun, Krishna Kannan, Wing Kam Liu, Alberto Mancini, Paolo Maria Mariano, Ingo Müller, Kumbakonan R. Rajagopal, Jan Jerzy Slawianowski. The book can be a useful tool for Scholars and PhD students addressing their research activity toward basic mathematical and physical problems accruing from the mechanics of materials.
Download or read book Tensor Calculus and Differential Geometry for Engineers written by Shahab Sahraee and published by Springer Nature. This book was released on 2023-12-12 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains the basics of tensor algebra as well as a comprehensive description of tensor calculus, both in Cartesian and curvilinear coordinates. Some recent developments in representation theorems and differential forms are included. The last part of the book presents a detailed introduction to differential geometry of surfaces and curves which is based on tensor calculus. By solving numerous exercises, the reader is equipped to properly understand the theoretical background and derivations. Many solved problems are provided at the end of each chapter for in-depth learning. All derivations in this text are carried out line by line which will help the reader to understand the basic ideas. Each figure in the book includes descriptive text that corresponds with the theoretical derivations to facilitate rapid learning.
Download or read book Continuum Physics V4 written by A. Cemal Eringen and published by Elsevier. This book was released on 2012-12-02 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuum Physics, Volume IV: Polar and Nonlocal Field Theories discusses the exposition of field theories for bodies which possess inner structure that can interact with mechanical and electromagnetic fields. This book provides precise presentations of exact continuum theories on materially non-uniform or non-simple bodies that can respond to short- and long-range inter-particle loads and fields. This volume consists of three parts. Part I is devoted to the study of continuum field theories for bodies having inner structure. All materials, to some extent, are composed of particles that behave like small rigid bodies or deformable particles, unlike the geometrical points of the classical continuum theory. The developments of nonlocal theories of nonpolar and polar continua are covered in Parts II and III. This publication is valuable to students and researchers interested in polar and nonlocal field theories.
Download or read book The Catalogue of Computational Material Models written by Paul Steinmann and published by Springer Nature. This book was released on 2021-03-20 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive account of the formulation and computational treatment of basic geometrically linear models in 1D. To set the stage, it assembles some preliminaries regarding necessary modelling, computational and mathematical tools. Thereafter, the remaining parts are concerned with the actual catalogue of computational material models. To this end, after starting out with elasticity as a reference, further 15 different basic variants of material models (5 x each of {visco-elasticity, plasticity, visco-plasticity}, respectively) are systematically explored. The presentation for each of these basic material models is a stand-alone account and follows in each case the same structure. On the one hand, this allows, in the true sense of a catalogue, to consult each of the basic material models separately without the need to refer to other basic material models. On the other hand, even though this somewhat repetitious concept may seem tedious, it allows to compare the formulation and resulting algorithmic setting of the various basic material models and thereby to uncover, in detail, similarities and differences. In particular, the response of each basic material model is analysed for the identical histories (Zig-Zag, Sine, Ramp) of prescribed strain and stress so as to clearly showcase and to contrast to each other the characteristics of the various modelling options.
Download or read book Introduction to Continuum Mechanics for Engineers written by Ray M. Bowen and published by Springer. This book was released on 1989-04-30 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended to introduce engineering graduate students to the essentials of modern continuum mechanics. The objective of an introductory course is to establish certain classical continuum models within a modern framework. Engineering students need a firm understanding of classical models such as linear viscous fluids (Navier-Stokes theory) and infinitesimal elasticity. This understanding should include an appreciation for the status of the classical models as special cases of general nonlinear continuum models. The relationship of the classical models to nonlinear models is essential in light of the increasing reliance, by engineering designers and researchers, on prepackaged computer codes. These codes are based upon models which have a specific and limited range of validity. Given the danger associated with the use of these computer codes in circumstances where the model is not valid, engineers have a need for an in-depth understanding of continuum mechanics and the continuum models which can be formu lated by use of continuum mechanics techniques. Classical continuum models and others involve a utilization of the balance equations of continuum mechanics, the second law of thermo dynamics, and the principles of material frame indifference and material symmetry. In addition, they involve linearizations of various types. In this text, an effort is made to explain carefully how the governing principles, linearizations, and other approximations combine to yield classical con tinuum models. A fundamental understanding of how these models evolve is most helpful when one attempts to study models which account for a wider array of physical phenomena.
Download or read book Mathematical Foundations of Elasticity written by Jerrold E. Marsden and published by Courier Corporation. This book was released on 2012-10-25 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graduate-level study approaches mathematical foundations of three-dimensional elasticity using modern differential geometry and functional analysis. It presents a classical subject in a modern setting, with examples of newer mathematical contributions. 1983 edition.
Download or read book Continuum Physics written by A Eringen and published by Elsevier. This book was released on 2012-12-02 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuum Physics, Volume III: Mixtures and EM Field Theories discusses the field theories for bodies composed of different substances, such as mixtures and interaction of electromagnetic effects with the deformable bodies. This book aims to present the mathematical foundations of nonlinear mechanical, electrical, and magnetic phenomena that take place in mixtures and materially uniform bodies. This volume consists of three parts. Part I is devoted to the development of the theory of mixtures, including kinematics, balance laws, and constitutive equations for bodies consisting of several different substances. Part II is concerned with the mechanics of deformable bodies interacted by electromagnetic fields. The deformation produced by EM fields, EM fields resulting from the deformation of bodies, and plethora of other physical phenomena arising from mechanical and EM interactions are also covered. Micromagnetism is covered in Part III, including considerations arising from the interaction of strong magnetic fields with the inner structure of the body. This publication is valuable to students and researchers interested in mixtures and EM field theories.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1965 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuum Mechanics for Engineers written by G. Thomas Mase and published by CRC Press. This book was released on 2020-05-01 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bestselling textbook in its first three editions, Continuum Mechanics for Engineers, Fourth Edition provides engineering students with a complete, concise, and accessible introduction to advanced engineering mechanics. It provides information that is useful in emerging engineering areas, such as micro-mechanics and biomechanics. Through a mastery of this volume’s contents and additional rigorous finite element training, readers will develop the mechanics foundation necessary to skillfully use modern, advanced design tools. Features: Provides a basic, understandable approach to the concepts, mathematics, and engineering applications of continuum mechanics Updated throughout, and adds a new chapter on plasticity Features an expanded coverage of fluids Includes numerous all new end-of-chapter problems With an abundance of worked examples and chapter problems, it carefully explains necessary mathematics and presents numerous illustrations, giving students and practicing professionals an excellent self-study guide to enhance their skills.
Download or read book Introduction to Continuum Mechanics for Engineers written by Ray M. Bowen and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained graduate-level text introduces classical continuum models within a modern framework. Its numerous exercises illustrate the governing principles, linearizations, and other approximations that constitute classical continuum models. Starting with an overview of one-dimensional continuum mechanics, the text advances to examinations of the kinematics of motion, the governing equations of balance, and the entropy inequality for a continuum. The main portion of the book involves models of material behavior and presents complete formulations of various general continuum models. The final chapter contains an introductory discussion of materials with internal state variables. Two substantial appendixes cover all of the mathematical background necessary to understand the text as well as results of representation theorems. Suitable for independent study, this volume features 280 exercises and 170 references.
Download or read book Recent Developments in Thermomechanics of Solids written by G. Lebon and published by Springer. This book was released on 2014-05-04 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of the contributions contained in this volume is to present the thermodynamic foundations of the response of elastic and dissipative materials. In particular, the governing equations of non linear thermoelasticity and thermoinelasticity as well as the basic properties of these equations as resulting from the primary assumptions of continuum thermodynamics are derived. The global formulation of thermodynamics of continua is discussed. A special attention is paid to the properties of the balance equations on a singular surface. The possible forms of the second law of thermodynamics are discussed within the frame work ofaxiomatic thermodynamics. Furthermore, the thermodynamiG requirements for differ ent kinds of materials are examined. The secondary purpose of the Course was to discuss some connections between rational and classical formulations of the principles of thermodynamics. The present volume contains the texts of three (of the four delivered) Course lectures. I hope it will constitute a useful source of information on the problems presented and discussed in Udine. Special thanks are due to the International Centre for Mechanical Sciences whose direction encouraged us to prepare and to deliver the lectures.
Download or read book Encyclopedia of Geomorphology written by Andrew Goudie and published by Routledge. This book was released on 2013-04-15 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume editor is the leading authority in the field Alphabetically organized in two volumes c.700 comprehensively signed, cross-referenced and indexed entries Detailed bibliographies and suggestions for further reading follow most entries Fully illustrated: over 300 plates and line drawings Written by an editorial team of over 270 experts from over thirty countries
Download or read book The Finite Element Method for Three Dimensional Thermomechanical Applications written by Guido Dhondt and published by John Wiley & Sons. This book was released on 2004-11-19 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Though many 'finite element' books exist, this book provides a unique focus on developing the method for three-dimensional, industrial problems. This is significant as many methods which work well for small applications fail for large scale problems, which generally: are not so well posed introduce stringent computer time conditions require robust solution techniques. Starting from sound continuum mechanics principles, derivation in this book focuses only on proven methods. Coverage of all different aspects of linear and nonlinear thermal mechanical problems in solids are described, thereby avoiding distracting the reader with extraneous solutions paths. Emphasis is put on consistent representation and includes the examination of topics which are not frequently found in other texts, such as cyclic symmetry, rigid body motion and nonlinear multiple point constraints. Advanced material formulations include anisotropic hyperelasticity, large strain multiplicative viscoplasticity and single crystal viscoplasticity. Finally, the methods described in the book are implemented in the finite element software CalculiX, which is freely available (www.calculix.de; the GNU General Public License applies). Suited to industry practitioners and academic researchers alike, The Finite Element Method for Three-Dimensional Thermomechanical Applications expertly bridges the gap between continuum mechanics and the finite element method.
