Download or read book Contemporary Methods of Optical Manufacturing and Testing written by Gregory M. Sanger and published by . This book was released on 1983 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optics Manufacturing written by Christoph Gerhard and published by CRC Press. This book was released on 2017-12-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical components are essential key elements in modern engineering and everyday life. The education of skilled personnel and specialists in the fields of theoretical and practical optics manufacturing is of essential importance for next-generation technologies. Against this background, this book provides the basis for the education and advanced training of precision and ophthalmic optics technicians, craftsmen, and foremen, and it is an extensive reference work for students, academics, optical designers or shop managers, and production engineers. It not only covers particularly used and applied machines, working materials, testing procedures, and machining steps for classical optics manufacturing, but it also addresses the production and specification of optical glasses as well as unconventional production techniques and novel approaches. Optics Manufacturing: Components and Systems furthermore covers the basics of light propagation and provides an overview on optical materials and components; presents an introduction and explanation of the necessary considerations and procedures for the initial definition of manufacturing tolerances and the relevant industrial standards for optics manufacturing; and addresses the production of micro optics, the assembly of opto-mechanical setups and possible manufacturing errors, and the impact of the resulting inaccuracies. In order to allow fast and clear access to the most essential information, each chapter ends with a short summary of the most important aspects, including an explanation of relevant equations, symbols, and abbreviations. For further reading, extensive lists of references are also provided. Finally, exercises on the covered basic principles of optics, approaches, and techniques of optics manufacturing—including their corresponding detailed solutions—are found in the appendix.
Download or read book Contemporary Methods of Optical Fabrication written by Charles L. Stonecypher and published by . This book was released on 1982 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Manufacturing and Testing written by and published by . This book was released on 1999 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Harnessing Light written by National Research Council and published by National Academies Press. This book was released on 1998-09-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical science and engineering affect almost every aspect of our lives. Millions of miles of optical fiber carry voice and data signals around the world. Lasers are used in surgery of the retina, kidneys, and heart. New high-efficiency light sources promise dramatic reductions in electricity consumption. Night-vision equipment and satellite surveillance are changing how wars are fought. Industry uses optical methods in everything from the production of computer chips to the construction of tunnels. Harnessing Light surveys this multitude of applications, as well as the status of the optics industry and of research and education in optics, and identifies actions that could enhance the field's contributions to society and facilitate its continued technical development.
Download or read book Handbook of Optical Engineering written by Daniel Malacara and published by CRC Press. This book was released on 2001-05-31 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook explains principles, processes, methods, and procedures of optical engineering in a concise and practical way. It emphasizes fundamental approaches and provides useful formulas and step-by-step worked-out examples to demonstrate applications and clarify calculation methods. The book covers refractive, reflective, and diffractive optical components; lens optical devices; modern fringe pattern analysis; optical metrology; Fourier optics and optical image processing; electro-optical and acousto-optical devices; spatial and spectral filters; optical fibers and accessories; optical fabrication; and more. It includes over 2,000 tables, flow charts, graphs, schematics, drawings, photographs, and mathematical expressions.
Download or read book Scientific Bulletin written by and published by . This book was released on 1985 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ONR Far East Scientific Bulletin written by and published by . This book was released on with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Optical Instruments and Techniques written by Daniel Malacara Hernández and published by CRC Press. This book was released on 2017-11-22 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Optical Instruments and Techniques includes twenty-three chapters providing processes, methods, and procedures of cutting-edge optics engineering design and instrumentation. Topics include biomedical instrumentation and basic and advanced interferometry. Optical metrology is discussed, including point and full-field methods. Active and adaptive optics, holography, radiometry, the human eye, and visible light are covered as well as materials, including photonics, nanophotonics, anisotropic materials, and metamaterials.
Download or read book Progress in Optics written by and published by Elsevier. This book was released on 1988-05-01 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a jubilee issue and contains some specially designed computer generated holograms for this occasion, together with a description of how to obtain the holographic effect.
Download or read book Fabrication Methods for Precision Optics written by Hank H. Karow and published by Wiley-Interscience. This book was released on 2004-09-08 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on an unpublished revision of the standard reference in the German optics industry. Designed as a source of facts, data and definitions, it reflects state-of-the-art technology and current practices in the United States and abroad. Practical in nature, it presents optical engineers with comprehensive coverage of material, tool and design methods and testing of the final product. Easily accessible with tables, graphs and equations, it will help professionals quickly and accurately find the most suitable solutions to their optical challenges.
Download or read book Optical Systems for Soft X Rays written by A.G. Michette and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fundamental problem in cell biology is the cause of aging. The solution to this problem has not yet been obtained because,(l) until recently, it was not possible to image living cells directly. The use of low-energy (soft) X rays has made such imaging possible, perhaps thereby allowing the aging process to be understood and possibly overcome (a result that may well generate further social, moral, and ethical problems). Fortun ately this is not the only aspect of cell biology amenable to soft X-ray imaging, and it is envisaged that many less controversial studies--such as investigations of the detailed differences between healthy and diseased or malignant cells (in their natural states) and processes of cell division and growth-will be made possible. The use of soft X rays is not limited to biological studies-many applications are possible in, for example, fusion research, materials science, and astronomy. Such studies have only recently begun in earnest because several difficulties had to be overcome, major among these being the lack (for some purposes) of sufficiently intense sources, and the technological difficulties associated with making efficient optical systems. As is well known, the advent of dedicated synchrotron radiation sources, in particular, has alleviated the first of these difficulties, not just for the soft X-ray region. It is the purpose of this book to consider progress in the second.
Download or read book Advanced Optical Manufacturing and Testing written by Gregory M. Sanger and published by . This book was released on 1990 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contemporary Optical Instrument Design Fabrication and Testing written by Leo H. J. F. Beckmann and published by . This book was released on 1986 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of Los Alamos Research written by Los Alamos National Laboratory and published by . This book was released on 1985 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Ophthalmic Optics written by José Alonso and published by Cambridge University Press. This book was released on 2019-04-11 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive account of the most recent developments in modern ophthalmic optics. It makes use of the powerful matrix formalism to describe curvature and power, providing a unified view of the optical and geometrical properties of lenses. This unified approach is applicable to the design and properties of not only spectacle lenses, but also contact and intraocular lenses (IOL). The newest developments in lens design, manufacturing and testing are discussed, with an emphasis on the description of free-form technology, which has surpassed traditional manufacturing methods and allows digital lenses to be specifically designed with the unique requirements of the user. Other important topics which are covered include modern lens materials, up-to-date lens measuring techniques, contact and intraocular lenses, progressive power lenses, low vision aids, ocular protection and coatings. Providing a broad overview of recent developments in the field, it is ideal for researchers, manufacturers and practitioners involved in ophthalmic optics.
Download or read book Materials Science and Technology of Optical Fabrication written by Tayyab I. Suratwala and published by John Wiley & Sons. This book was released on 2018-10-16 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental science of grinding and polishing by examining the chemical and mechanical interactions over many scale lengths Manufacturing next generation optics has been, and will continue to be, enablers for enhancing the performance of advanced laser, imaging, and spectroscopy systems. This book reexamines the age-old field of optical fabrication from a materials-science perspective, specifically the multiple, complex interactions between the workpiece (optic), slurry, and lap. It also describes novel characterization and fabrication techniques to improve and better understand the optical fabrication process, ultimately leading to higher quality optics with higher yield. Materials Science and Technology of Optical Fabrication is divided into two major parts. The first part describes the phenomena and corresponding process parameters affecting both the grinding and polishing processes during optical fabrication. It then relates them to the critical resulting properties of the optic (surface quality, surface figure, surface roughness, and material removal rate). The second part of the book covers a number of related topics including: developed forensic tools used to increase yield of optics with respect to surface quality (scratch/dig) and fracture loss; novel characterization and fabrication techniques used to understand/quantify the fundamental phenomena described in the first part of the book; novel and recent optical fabrication processes and their connection with the fundamental interactions; and finally, special techniques utilized to fabricate optics with high damage resistance. Focuses on the fundamentals of grinding and polishing, from a materials science viewpoint, by studying the chemical and mechanical interactions/phenomena over many scale lengths between the workpiece, slurry, and lap Explains how these phenomena affect the major characteristics of the optic workpiece—namely surface figure, surface quality, surface roughness, and material removal rate Describes methods to improve the major characteristics of the workpiece as well as improve process yield, such as through fractography and scratch forensics Covers novel characterization and fabrication techniques used to understand and quantify the fundamental phenomena of various aspects of the workpiece or fabrication process Details novel and recent optical fabrication processes and their connection with the fundamental interactions Materials Science and Technology of Optical Fabrication is an excellent guidebook for process engineers, fabrication engineers, manufacturing engineers, optical scientists, and opticians in the optical fabrication industry. It will also be helpful for students studying material science and applied optics/photonics.
