Download or read book Constructional Iron and Steel Work As Applied to Public Private and Domestic Buildings written by Francis Campin and published by Rarebooksclub.com. This book was released on 2013-09 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1896 edition. Excerpt: ...twice as much as the extra weight in an 8 in. x 4 in. over that in a 5 in. x 2 in. joist. Of course, the joists cannot move laterally when fire-clay or terra-cotta lintels or permanent centres are placed between them and so determine their spacing. We now come to the trimmer joists D D; each of these has to carry its own normal load of 4-8 tons equally distributed and the concentrated load. brought upon it by the trimmer E E, which is one-half of the total load on the latter, or 2-3 tons at one foot from the bearing E. The amount of load thrown upon the bearing at the other end of joist D by the concentrated load will be 2-3 1 = 0-096 ton. 24 4-8 The load per lineal foot on the joist = = 02 ton. Let x equal the distance of any given point in the joist d from the bearing on the wall opposite A B, and M the moment of stress at that point, then, M= -w4-0-096 = 0-2 xa _ 0-2 x 24 x x _ 0.Q96 x = 0-1 Xx2-2-496 x The value of z which gives the maximum moment of stress must next be found. From the point of maximum stress it will commence decreasing in each direction, but we may imagine two points taken infinitesimally close together, so that no appreciable difference occurs between them; let a be an indefinitely small increment of x; then M = 0-1 (x + of-2-496 (x + a)-0-l(x-+ 2xa + or)--2-496 (x + a). As a is taken indefinitely small, or, which will be much smaller, may be disregarded, then 01 (2 + Ixa)-2-496 (x + a) = 0-1 3?-2-496x; subtracting 0-l x2 and--2-496 x from each side of tho equation, we have 0-2 x x.a--2-496 a; whence = 12-48 feet. Replacing x in the general equation by this value the maximum moment of stress is found, M--0-1 x 12-483-2-496 x 12-48 =--15-575 foot-tons. To find the equivalent distributed load this is...
Download or read book Constructional Iron and Steel Work written by Francis Campin and published by Cullen Press. This book was released on 2009-05 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1917 edition. Excerpt: ... (6) Columns for Discount on Purchases and Discount on Notes on the same side of the Cash Book; (c) Columns for Discount on Sales and Cash Sales on the debit side of the Cash Book; (d) Departmental columns in the Sales Book and in the Purchase Book. Controlling Accounts.--The addition of special columns in books of original entry makes possible the keeping of Controlling Accounts. The most common examples of such accounts are Accounts Receivable account and Accounts Payable account. These summary accounts, respectively, displace individual customers' and creditors' accounts in the Ledger. The customers' accounts are then segregated in another book called the Sales Ledger or Customers' Ledger, while the creditors' accounts are kept in the Purchase or Creditors' Ledger. The original Ledger, now much reduced in size, is called the General Ledger. The Trial Balance now refers to the accounts in the General Ledger. It is evident that the task of taking a Trial Balance is greatly simplified because so many fewer accounts are involved. A Schedule of Accounts Receivable is then prepared, consisting of the balances found in the Sales Ledger, and its total must agree with the balance of the Accounts Receivable account shown in the Trial Balance. A similar Schedule of Accounts Payable, made up of all the balances in the Purchase Ledger, is prepared, and it must agree with the balance of the Accounts Payable account of the General Ledger." The Balance Sheet.--In the more elementary part of the text, the student learned how to prepare a Statement of Assets and Liabilities for the purpose of disclosing the net capital of an enterprise. In the present chapter he was shown how to prepare a similar statement, the Balance Sheet. For all practical...
Download or read book CONSTRUCTIONAL IRON STEEL WO written by Francis Campin and published by . This book was released on 2016-08-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Constructional Iron and Steel Work written by Francis Campin and published by Forgotten Books. This book was released on 2015-06-25 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Constructional Iron and Steel Work: As Applied to Public, Private, and Domestic Buildings, a Practical Treatise for Architects, Students, and Builders The object of the present work is mainly to place before the Architectural Student, in a concise and practical form, correct methods of designing the Constructional Iron and Steel Work now so generally used in all classes of buildings; and it is believed that the volume will be found acceptable, not only by Students, but by many Architects in actual practice, and by persons engaged in Building. For any one who is concerned in this branch of Engineering, it is impossible to overlook the fact that it has not hitherto received the attention from Architects which it deserves; its importance is paramount, for if the constructional part of a fabric fails all must become a ruin; and it is therefore incumbent upon those preparing to practise as Architects, to make themselves acquainted with the theoretical laws of stress and strength, and with the practical conditions upon which depends the safety of the buildings they are commissioned to design. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Constructional Iron and Steel Work as Applied to Public Private and Domestic Buildings written by Francis Campin and published by Palala Press. This book was released on 2016-05-19 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Constructional Iron and Steel Work written by Francis Campin and published by Forgotten Books. This book was released on 2017-09-13 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Constructional Iron and Steel Work: As Applied to Public, Private, and Domestic Buildings, a Practical Treatise for Architects, Students, and Builders If wood joists are used, these can be cut and trimmed about to suit altered spans and altered arrangements Of stair cases and lift Openings, without serious increase of expense but where concrete floors are used, carried upon rolled iron or steel joists, the case is very different, for the floor becomes a net-work of metal joists, each one Of which should be sent to the site Of such length that it will pass into its place with sufficient bearing on the mam girder, but not too long to be placed without cutting. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Constructional Iron and Steel Work as Applied to Public Private and Domestic Buildings written by Francis Campin and published by . This book was released on 1896 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Constructional Iron and Steel Work as Applied to Public Private and Domestic Buildings Etc written by Francis Campin and published by . This book was released on 1896 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Constructional Iron and Steel Work as Applied to Public Private and Domestic Buildings A Practical Treatise for Architects Students and Builders Etc written by Francis CAMPIN and published by . This book was released on 1896 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Granites and Our Granite Industries written by George Frederick Harris and published by . This book was released on 1888 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Agricultural Valuer s Assistant written by Tom Bright and published by . This book was released on 1901 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Leather Manufacture written by Alexander Watt and published by . This book was released on 1906 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Refrigeration Cold Storage and Ice making written by Alexander James Wallis-Tayler and published by . This book was released on 1902 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Elements of Electrical Engineering written by Tyson Sewell and published by . This book was released on 1905 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Treatise on the Blasting and Quarrying of Stone for Building and Other Purposes written by Sir John Fox Burgoyne and published by . This book was released on 1895 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Architecture of Marcus Vitruvius Pollio tr by J Gwilt written by Marcus Vitruvius Pollio and published by . This book was released on 1874 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A rial Navigation written by Frederick Walker and published by . This book was released on 1902 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
