Download or read book Construction Technology For Tall Buildings Fifth Edition written by Yit Lin Michael Chew and published by World Scientific. This book was released on 2017-07-13 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 5th edition covers the latest practices and processes of various alternative methods for the construction of tall buildings from foundation to roof. The text progresses through the stages of site investigation, excavation and earthmoving, foundation construction, basement construction, structural systems for the superstructure, site and material handling, wall and floor construction, external wall and roof construction. The planning, safety and environmental considerations, methods, materials, equipment, and construction sequence of the various proprietary systems for each of these respectively stages are discussed.The target readers are practitioners and students in building and construction professions including architecture, engineering, project and facilities management, building and construction management, real estate, quantity and land surveying.

Download or read book Construction Technology for Tall Buildings written by M. Y. L. Chew and published by World Scientific. This book was released on 2001 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study describes current construction practices and processes for tall buildings from foundation to roof. It discusses the construction sequence of the various proprietary systems and their merits and disadvantages.

Download or read book Construction Technology For Tall Buildings 4th Edition written by Yit Lin Michael Chew and published by World Scientific. This book was released on 2012-06-04 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the latest construction practices and processes for tall buildings from foundation to roof. It attempts to acquaint readers with the methods, materials, equipment and systems used for the construction of tall buildings.The text progresses through the stages of site investigation, excavation and foundations, basement construction, structural systems for the superstructure, site and material handling, wall and floor construction, cladding and roof construction. The construction sequence, merits and limitations of the various proprietary systems commonly used in these respective stages are discussed. This fourth edition also includes several new topics not covered in the previous edition.The target readers are practitioners and students in the related professions including architecture, engineering, building, real estate, construction, project and facilities management, and quantity and land surveying.

Download or read book Construction Technology For Tall Buildings 2nd Edition written by Yit Lin Michael Chew and published by World Scientific Publishing Company. This book was released on 2000-12-29 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of Construction Technology for Tall Buildings comprehensively revises and expands the previous edition, incorporating new topics and many new figures. The text introduces the latest construction practices and processes for tall buildings from foundation to roof. It acquaints the reader with the methods, materials, equipment and systems used for the construction of tall buildings.The book progresses through the stages of site investigation, excavation and foundations, basement construction, structural systems for the superstructure, site and material handling, wall and floor construction, cladding and roof construction. The construction sequence, and the merits and limitations of the various proprietary systems commonly used in these stages, are discussed.The target readers are practitioners and students in the related professions, including architecture, engineering, building, real estate, project and property management, quantity and land surveying.

Download or read book Construction Technology written by Eric Fleming and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook provides a comprehensive introduction to everyaspect of the technology of low-rise construction. It includessub-structure (site work, setting out and foundations) andsuperstructure (flooring, roofs, finishes, fittings and fixtures).The material here covers the first year course requirement of allcourses on which construction technology is taught - no matter whatthe ultimate qualification. It offers tried and tested solutions to a range of constructionproblems and is organised following the sequence of construction.It will show what has been done in the past, demonstrating goodpractice - what works and what doesn't - and common faults. Thereare summaries of the more important BSI documents and reference tothe latest building regulations. Lengthy explanations are avoided by relying heavily on hundreds ofillustrations, pairing detail drawings with clear photographs toshow real life construction situations. The supporting spreadsheet referred to in the book can be found atthis linkhttp://www.blackwellpublishing.com/pdf/fleming/Fleming_spreadsheet.xls

Download or read book Damping Technologies for Tall Buildings written by Alberto Lago and published by Butterworth-Heinemann. This book was released on 2018-09-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damping Technologies for Tall Buildings provides practical advice on the selection, design, installation and testing of damping systems. Richly illustrated with images and schematics, this book presents expert commentary on different damping systems, giving readers a way to accurately compare between different device categories and gain and understand the advantages and disadvantages of each. In addition, the book covers their economical and sustainability implications. Case studies are included to provide a direct understanding on the possible applications of each device category.

Download or read book Building the Skyline written by Jason M. Barr and published by Oxford University Press. This book was released on 2016-05-12 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manhattan skyline is one of the great wonders of the modern world. But how and why did it form? Much has been written about the city's architecture and its general history, but little work has explored the economic forces that created the skyline. In Building the Skyline, Jason Barr chronicles the economic history of the Manhattan skyline. In the process, he debunks some widely held misconceptions about the city's history. Starting with Manhattan's natural and geological history, Barr moves on to how these formations influenced early land use and the development of neighborhoods, including the dense tenement neighborhoods of Five Points and the Lower East Side, and how these early decisions eventually impacted the location of skyscrapers built during the Skyscraper Revolution at the end of the 19th century. Barr then explores the economic history of skyscrapers and the skyline, investigating the reasons for their heights, frequencies, locations, and shapes. He discusses why skyscrapers emerged downtown and why they appeared three miles to the north in midtown-but not in between the two areas. Contrary to popular belief, this was not due to the depths of Manhattan's bedrock, nor the presence of Grand Central Station. Rather, midtown's emergence was a response to the economic and demographic forces that were taking place north of 14th Street after the Civil War. Building the Skyline also presents the first rigorous investigation of the causes of the building boom during the Roaring Twenties. Contrary to conventional wisdom, the boom was largely a rational response to the economic growth of the nation and city. The last chapter investigates the value of Manhattan Island and the relationship between skyscrapers and land prices. Finally, an Epilogue offers policy recommendations for a resilient and robust future skyline.

Download or read book Successful Training in Gastrointestinal Endoscopy written by Jonathan Cohen and published by John Wiley & Sons. This book was released on 2022-05-02 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successful Training in Gastrointestinal Endoscopy Teaches trainee gastroenterologists the endoscopic skills needed to meet the medical training requirements to practice gastroenterology and helps clinical specialists refresh their skills to pass their recertification This book provides all gastroenterologists with the exact set of skills required to perform endoscopy at the highest level. Featuring contributions from internationally recognized leaders in endoscopy education and an endorsement by the World Organization of Digestive Endoscopy, it examines the specific skill sets and procedure-related tasks that must be mastered when learning a particular technique, including: specific descriptions of accessories required; standard training methods for the procedure; optimal utilization of novel learning modalities such as simulators; quality measures and objective parameters for competency; and available tools for assessing competency once training has been completed. Successful Training in Gastrointestinal Endoscopy, Second Edition features 400 high-quality, outstanding color photos to assist with comprehension. It is also complemented by a website containing over 130 annotated teaching videos of both actual procedures and ex-vivo animal model simulations. These videos illustrate, step by step, the proper techniques to be followed, highlighting clinical pearls of wisdom from the experts and the most common mistakes to avoid. Offers comprehensive and practical training guidelines in all the endoscopy procedures and techniques trainee gastroenterologists are required to learn Provides trainees with the skills required to perform endoscopy to the level required by the ACGME in order to practice gastroenterology Presents seasoned gastroenterologists with an outstanding tool to brush up their endoscopy skills and to familiarize them with new trends in safety and competence Includes website with video clips visually demonstrating all the endoscopic procedures step-by-step highlighting common mistakes Endorsed by the World Organization of Digestive Endoscopy Successful Training in Gastrointestinal Endoscopy, Second Edition is an excellent book for all trainee gastroenterologists (particularly endoscopists and colonoscopists) training for board exams. It will also greatly benefit gastroenterology specialists (especially those training for re-certification), as well as internal medicine physicians and trainees.

Download or read book Construction Technology For Tall Buildings 3rd Edition written by Yit Lin Michael Chew and published by . This book was released on 2009 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tall Building Foundation Design written by Harry G. Poulos and published by CRC Press. This book was released on 2017-07-20 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the design of foundations for tall buildings. After a general review of the characteristics of tall buildings, various foundation options are discussed followed by the general principles of foundation design as applied to tall buildings. Considerable attention is paid to the methods of assessment of the geotechnical design parameters, as this is a critical component of the design process. A detailed treatment is then given to foundation design for various conditions, including ultimate stability, serviceability, ground movements, dynamic loadings and seismic loadings. Basement wall design is also addressed. The last part of the book deals with pile load testing and foundation performance measurement, and finally, the description of a number of case histories. A feature of the book is the emphasis it places on the various stages of foundation design: preliminary, detailed and final, and the presentation of a number of relevant methods of design associated with each stage.

Download or read book Facilities Planning And Design An Introduction For Facility Planners Facility Project Managers And Facility Managers written by Jonathan Khin Ming Lian and published by World Scientific. This book was released on 2018-12-28 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the ten essentials of facilities planning and design. It covers topics such as strategic planning, space standards, architectural programming, site selection, master planning, environmental planning, capital planning, workplace planning and design, and space management. Examples will be drawn from the planning and design of airports and universities which are large organisations with extensive campuses and are asset heavy in terms of buildings.By learning about the planning and design processes as it relates to facilities, students and facility professionals will be able to align facilities planning and design with the organisation's strategic priorities, manage design consultants by understanding the planning and design process, manage the planning and design of spaces at different scales, and manage the use of existing space effectively.The book is designed such that its chapters may be read either sequentially or as individual standalone references or resources for specific aspects of facility planning, management and design.

Download or read book Fundamentals of Building Components and Systems written by Denis Rudnev and published by AuthorHouse. This book was released on 2017-05-22 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Building Components and Systems: For Community Association Managers is a basic guide of structural, mechanical, and aesthetic components of a residential building. This guide is meant for managers and other support staff tasked with maintaining the physical property of a community association. The guide is designed as a base of knowledge when dealing with contractors and performing basic evaluations of the property. This publication will allow the manager or other staff to better understand and solve issues with the help of professionals, as well as better communicate issues to the Boards of Directors and residents.

Download or read book Construction Materials Methods and Techniques written by William Perkins Spence and published by Cengage Learning. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prev. ed: Construction methods, materials, and techniques, Clifton Park, N.Y., Thomas Delmar Learning, c2006.

Download or read book Structural Engineering Handbook Fifth Edition written by Mustafa Mahamid and published by McGraw Hill Professional. This book was released on 2020-04-17 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The industry-standard guide to structural engineering—fully updated for the latest advances and regulations For 50 years, this internationally renowned handbook has been the go-to reference for structural engineering specifications, codes, technologies, and procedures. Featuring contributions from a variety of experts, the book has been revised to align with the codes that govern structural design and materials, including IBC, ASCE 7, ASCE 37, ACI, AISC, AASHTO, NDS, and TMS. Concise, practical, and user-friendly, this one-of-a-kind resource contains real-world examples and detailed descriptions of today’s design methods. Structural Engineering Handbook, Fifth Edition, covers: • Computer applications in structural engineering • Earthquake engineering • Fatigue, brittle fracture, and lamellar tearing • Soil mechanics and foundations • Design of steel structural and composite members • Plastic design of steel frames • Design of cold-formed steel structural members • Design of aluminum structural members • Design of reinforced- and prestressed-concrete structural members • Masonry construction and timber structures • Arches and rigid frames • Bridges and girder boxes • Building design and considerations • Industrial and tall buildings • Thin-shell concrete structures • Special structures and nonbuilding structures

Download or read book Estimating Building Costs written by Calin M. Popescu and published by CRC Press. This book was released on 2003-04-22 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Companies live or die on the basis of estimating their costs. Preparing estimates and bidding for new jobs is a complex and often costly process. There is no substitute for on the job training -- until now. Drawing on the authors' combined experience of more than 70 years, Estimating Building Costs presents state-of-the-art principles, practices, and techniques for assessing these expenditures that can be applied regardless of changes in the costs of materials, equipment, and labor. The book is an efficient and practical tool for developing contracts or controlling project costs. The authors cover the major components of the direct cost: estimating procedures and cost trends related to materials, construction equipment, and skilled and unskilled labor. They describe various types of building estimates encountered during the lifecycle of a project, as well as the role and accuracy of each. The book provides an overview of the industry, cost indexes in use, approaches to preparing a detailed estimate, and an in-depth description of the organization and function of the estimating group. Including CSI Master Format and UniFormat codes, estimating forms, a list of available estimating software packages, a detailed construction site and investigation report, the book provides a cost estimating methodology that readers can tailor to their own organizational needs.

Download or read book Settlement Calculation on High Rise Buildings written by Xiangfu Chen and published by Springer Science & Business Media. This book was released on 2011-12-21 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Settlement Calculation on High-Rise Buildings: Theory and Application" discusses, for the first time, the latest developments in settlement calculation theory and case studies including analysis and research results for more than thirty high-rise buildings with a height of 100m-420m. Rigorously reviewed, this book provides a number of useful methods and a unique practical perspective on settlement calculation of high-rise buildings. It covers soft soil constitutive model and computation parameters, the theory of soil stress and strain, and new methods of settlement calculation in super long pile and space-varying rigidity group piles, box(raft), pile-box(raft), diaphragm wall-pile-box(raft) and rock foundation on high-rise buildings. This book is a useful design and construction resource for scientists and engineers, as well as for professionals in structural mechanics and geotechnical engineering. Professor Xiangfu Chen is chairman of the Academic Commission of China State Construction Engineering Corporation (CSCEC), chief engineer of China Construction Beijing Design and Research Institute, and a Doctoral Tutor at Tongji University Shanghai.

Download or read book Design For Maintainability Benchmarks For Quality Buildings written by Yit Lin Michael Chew and published by World Scientific Publishing Company. This book was released on 2018-03-20 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the motto of 'doing it right the first time', this book focuses on spearheading the integration of designers, constructors and Facility Management, by providing easy-to-read tables summarising knowledge learned from past mistakes and maintainability benchmarks. Based on the predictive/preventive approach, the tables serve to define acceptable standards in design, construction and operation practices, to ensure the standard and quality of design, construction and maintenance practices for high maintainability at the outset of the planning/design stage. The text covers technical issues related to major components of a facility for basements, wet areas, façades, common areas, roofs and M&E.Related Link(s)