Download or read book Construction Technology written by Roy Chudley and published by Longman. This book was released on 1987 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four volumes of Construction Technology provide a comprehensive guide to building technology from simple domestic single storey construction using traditional techniques to more complex multi-storey construction using more modern industrialised techniques. Each volume describes the technology concisely and is well illustrated with the author's own illustrations. The series provides a basic knowledge of all building activities from basic methods of construction in the early volumes through to more complex topics such as site planning, curtain walling and builders plant in later volumes. The series concentrates on the technology and avoids lengthy descriptive passages, leaving the description to the author's very detailed drawings. Volume 2 completes the coverage of conventional methods and materials of construction. As with volume 1, it deals with the construction of a small structure such as a bungalow or two-storey house. The book introduces more complex topics than are covered in volume 1. It deals with site and temporary works, e.g. simple excavations and scaffolding; substructure topics such as retaining walls and reinforce concrete foundations; simple framed buildings; floors and roof structures such as precast concrete floors and asphalt and lead-covered roofs; finishes and fittings such as simple concrete stairs; insulation; and services such as electrical and gas installations.

Download or read book Construction Technology written by Eric Fleming and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook provides a comprehensive introduction to everyaspect of the technology of low-rise construction. It includessub-structure (site work, setting out and foundations) andsuperstructure (flooring, roofs, finishes, fittings and fixtures).The material here covers the first year course requirement of allcourses on which construction technology is taught - no matter whatthe ultimate qualification. It offers tried and tested solutions to a range of constructionproblems and is organised following the sequence of construction.It will show what has been done in the past, demonstrating goodpractice - what works and what doesn't - and common faults. Thereare summaries of the more important BSI documents and reference tothe latest building regulations. Lengthy explanations are avoided by relying heavily on hundreds ofillustrations, pairing detail drawings with clear photographs toshow real life construction situations. The supporting spreadsheet referred to in the book can be found atthis linkhttp://www.blackwellpublishing.com/pdf/fleming/Fleming_spreadsheet.xls

Download or read book Advanced Construction Technology written by Roy Chudley and published by Pearson Education. This book was released on 2006 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Construction Technology offers a comprehensive, practical, illustrative guide to many aspects of construction practice used for industrial and commercial buildings.

Download or read book Construction Technology For Tall Buildings 6th Edition written by Yit Lin Michael Chew and published by World Scientific. This book was released on 2024-08-29 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this 6th edition, the text and illustrations of every chapter are thoroughly revised to present the latest technologies, methodologies, and processes for the construction of tall buildings, from foundation, basement, and superstructure to roof. Contemporary sustainability concerns, as well as the latest regulations and standards, are highlighted.The target readers are practitioners and students in the building and construction professions including architecture, engineering, infrastructure and project management, building and construction management, real estate, quantity surveying and land surveying.

Download or read book Sustainable Construction Technologies written by Vivian Y. Tam and published by Butterworth-Heinemann. This book was released on 2019-01-03 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Construction Technologies: Life-Cycle Assessment provides practitioners with a tool to help them select technologies that are financially advantageous even though they have a higher initial cost. Chapters provide an overview of LCA and how it can be used in conjunction with other indicators to manage construction. Topics covered include indoor environment quality, energy efficiency, transport, water reuse, materials, land use and ecology, and more. The book presents a valuable tool for construction professionals and researchers that want to apply sustainable construction techniques to their projects. Practitioners will find the international case studies and discussions of worldwide regulation and standards particularly useful. - Provides a framework for analyzing sustainable construction technologies and economic viability - Introduces key credit criteria for different sustainable construction technologies - Covers the most relevant construction areas - Includes technologies that can be employed during the process of construction, or to the product of the construction process, i.e. buildings - Analyzes international rating systems and provides supporting case studies

Download or read book The Construction Technology Handbook written by Hugh Seaton and published by John Wiley & Sons. This book was released on 2021-01-07 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tired of new software that doesn't seem to work in the field? Ready to get your teams up to speed and productive with the latest tools? The Construction Technology Handbook takes a ground up, no jargon look at technology in the construction industry. From clear, quickly grasped explanations of how popular software actually works to how companies both large and small can efficiently try out and onboard new tools, this book unlocks new ways for construction field teams, firm owners, managers, leaders, and employees to do business. You'll learn about: Simple frameworks for making sense of all the new options cropping up How software and data work and how they work together to make your job easier and safer What artificial intelligence really is and how it can help real companies today Tools that are just over the horizon that will, one day, make your job just a little bit easier New and practical resources to help you incorporate an attitude of innovation and technology adoption into your workplace Perfect for general contractors and subcontractors, The Construction Technology Handbook also belongs on the bookshelves of construction technology vendors and construction workers who want to better understand the needs of the construction industry and the inner workings of construction technology, respectively.

Download or read book Advances in Building Construction Technology written by Mohammad Arif Kamal and published by . This book was released on 2021-04-20 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building construction technology is concerned with the technical performance of buildings, building materials, and building construction systems. Technological progress has introduced many innovations in the field of construction industry. The building construction technology covers a wide range of modern techniques and practices that encompass the latest developments in materials technology and their applications, design procedures, quantity surveying, structural analysis and design, the functioning of components and systems, procedures and details of building assembly; operating strategies and so on. The adoption of advanced construction technology requires an appropriate design, commitment from the whole project team, suitable procurement strategies, good quality control, appropriate training and careful commissioning. There is a difference between new and old traditional construction methods. The use of machinery and automation has made its way through the civil engineering and construction industry. Most of the building components such as columns, roofs and concrete blocks are available as prefabricated forms that increase the speed of construction process greatly. In the rapidly changing scenario of building sector, architects, engineers and builders should search for new construction technologies to adopt in future constructions that benefits like energy efficiency, resources and water conservation, improved indoor air quality, life cycle cost reduction, durability and low maintenance. Therefore, to attain these objectives, application and knowledge of latest advancements in various technologies are of prime concern. This book 'Advances in Building Construction Technology' contains six chapters which introduces various scientific methods and state-of-the-art building constriction technologies and systems that may be beneficial to architects, engineers, building scientists and construction industry professionals.

Download or read book Construction Technology written by Tony Bryan and published by John Wiley & Sons. This book was released on 2010-03-22 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Construction Technology: Analysis and Choice has been expanded to include commercial buildings. This now covers, in a single textbook, all the basic forms of construction studied on professional courses. The book takes as its theme the process of choice: what the expert has to know and how he/she might think through the decisions to be made about the design, production, maintenance and disposal of buildings. It is written with the conviction that by focusing on the process of choice, the range of theory and knowledge that is useful to practice becomes explicit, making the link between knowledge and practice, and between understanding and experience. The new edition has been updated throughout with extensive additions to Chapter13: Manufacture and Assembly and to Chapter 15: Sustainability. An entire new section has been added, covering all the main elements of commercial construction. Students will find here explanations of how environments, structural behaviour, production know-how, cost and social concerns such as sustainability can be taken into account in the choice of construction. They will also gain a clear understanding of the construction details and specifications adopted for both housing and commercial buildings in the UK at the beginning of the 21st century. Provides a framework to think through proposed solutions Sets the choice of solution in both time and place, and in the context of sustainability Focuses on key questions: will the proposal fail; and can it be built? Considers a building’s response to loading, environmental conditions and time Looks at the production process as manufacture and assembly Book website at www.wiley.com/go/bryanconstructiontech2e Contains nearly 200 fully referenced, clear line drawings to download for free, as well as suggested learning activities for lecturers to incorporate into their teaching programmes.

Download or read book The Construction Technology Handbook written by Hugh Seaton and published by John Wiley & Sons. This book was released on 2020-12-14 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tired of new software that doesn’t seem to work in the field? Ready to get your teams up to speed and productive with the latest tools? The Construction Technology Handbook takes a ground up, no jargon look at technology in the construction industry. From clear, quickly grasped explanations of how popular software actually works to how companies both large and small can efficiently try out and onboard new tools, this book unlocks new ways for construction field teams, firm owners, managers, leaders, and employees to do business. You’ll learn about: Simple frameworks for making sense of all the new options cropping up How software and data work and how they work together to make your job easier and safer What artificial intelligence really is and how it can help real companies today Tools that are just over the horizon that will, one day, make your job just a little bit easier New and practical resources to help you incorporate an attitude of innovation and technology adoption into your workplace Perfect for general contractors and subcontractors, The Construction Technology Handbook also belongs on the bookshelves of construction technology vendors and construction workers who want to better understand the needs of the construction industry and the inner workings of construction technology, respectively.

Download or read book Architectural and Building Construction Technology written by United States. Office of Education and published by . This book was released on 1969 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Construction Technology For Tall Buildings 4th Edition written by Yit Lin Michael Chew and published by World Scientific. This book was released on 2012-06-04 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the latest construction practices and processes for tall buildings from foundation to roof. It attempts to acquaint readers with the methods, materials, equipment and systems used for the construction of tall buildings.The text progresses through the stages of site investigation, excavation and foundations, basement construction, structural systems for the superstructure, site and material handling, wall and floor construction, cladding and roof construction. The construction sequence, merits and limitations of the various proprietary systems commonly used in these respective stages are discussed. This fourth edition also includes several new topics not covered in the previous edition.The target readers are practitioners and students in the related professions including architecture, engineering, building, real estate, construction, project and facilities management, and quantity and land surveying.

Download or read book Construction Technology 2 Industrial and Commercial Building written by Mike Riley and published by Bloomsbury Publishing. This book was released on 2018-02-20 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed in a structured, directed format to help develop understanding, rather than just providing a simple source of information, this popular undergraduate textbook offers comprehensive coverage of industrial and commercial building technology. It builds on material in the first volume in the series Construction Technology 1: House Construction but it is also valuable as a standalone text. The most student-friendly textbook in the area, it uses a wealth of features to reinforce understanding and test knowledge, including case studies and comparative studies. Case studies include photographs and commentary on specific aspects of the technology of framed buildings, while comparative studies allow the reader to make a critical evaluation, comparing and contrasting design details and solutions. This textbook is aimed at undergraduates in Construction Management, Quantity Surveying and Building Surveying, and HNC/D students in the same areas. It is also ideal for associated Built Environment courses e.g. Land Management, Civil Engineering, where the basic technologies need to be understood. New to this Edition: - Thoroughly revised throughout - New material on sustainable construction incorporated as a key theme in each aspect of technology - A new chapter on building services installations - A new section of the highly topical subject of Building Information Modelling (BIM)

Download or read book Technical Education Program Series No 9 Architectural and Building Construction Technology written by United States. Education Office and published by . This book was released on 1969 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Trends in Construction Technology and Management written by M. S. Ranadive and published by Springer Nature. This book was released on 2022-09-27 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Advances in Construction Technology and Management (ACTM 2021) and explores recent and innovative developments in all aspects of civil engineering. Advanced construction technologies such as 3D printing, intelligently built environment, use of artificial intelligence, smart structures, green buildings, advanced and engineered materials for producing green concrete, and many more such topics are covered in this book. The advanced management tools such as building information modeling, augmented reality, advanced task management software, and one of the most recent technological advancements are drones, which are changing the face of surveying and security are also explored. This book will be useful for researchers, academicians, and practitioners working in the area of civil engineering and allied fields.

Download or read book Construction Technology 1 House Construction written by Mike Riley and published by Bloomsbury Publishing. This book was released on 2018-04-18 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Technology 1: House Construction offers a highly accessible introduction to the key stages of domestic house construction from planning to internal finishes. Its student-friendly layout uses detailed figures, photos and case studies from real-life building sites to aid a practical understanding of construction techniques, providing clear step-by-step guidance in learning the basic principles of low-rise residential construction. This textbook is a vital resource for students in construction, property and architecture, BSc and MSc, including any student taking courses in building surveying, quantity surveying, real estate and construction management, as well as those studying at the HNC/HND level. New to this Edition: - The sections on off-site manufacture and modular approaches to construction have been significantly updated and expanded. The nature of house construction utilising panelised and volumetric approaches is explained with supporting case study examples and photographic illustrations. - The increased recognition of sustainability as a key element in modern house building is reflected in expanded consideration of the environmental implications of construction design and practice. - The characteristics of house form, construction and technology that impact upon thermal and environmental performance are included together with updated content relating to SAP calculations and target energy performance. - Advances in technology and evolving approaches to passive features of environmentally-conscious design are incorporated together with the introduction of issues around connected homes. - The material has been amended in line with current UK building regulations, environmental guidance and legislation including statutory control of the building process and health and safety.

Download or read book Sustainable Decision Making in Civil Engineering Construction and Building Technology written by Edmundas Kazimieras Zavadskas and published by Infinite Study. This book was released on with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable decision-making in civil engineering, construction and building technology can be supported by fundamental scientific achievements and multiple-criteria decision-making (MCDM) theories.

Download or read book Construction Technology and Management written by Rajesh Kumar R and published by Jyothis Publishers. This book was released on 2022-08-21 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction technology focuses on principles, use of standards, and the steps involved in the design and construction of buildings and structures. We have included numerous neatly drawn figures for the better understanding of the subject.