Download or read book Construction Site Planning and Logistical Operations written by Randy R. Rapp and published by Purdue University Press. This book was released on 2015 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organizing and administering a construction site so that the right resources get to the right place in a timely fashion demands strong leadership and a rigorous process. Good logistical operations are essential to profitability, and this book is the essential, muddy boots guide to efficient site management. Written by experienced educator-practitioners from the world-leading Building Construction Management program at Purdue University, this volume is the ultimate guide to the knowledge, skills, and abilities that need to be mastered by project superintendents. Observations about leadership imperatives and techniques are included. Organizationally, the book follows site-related activities from bidding to project closeout. Beyond outlining broad project managerial practices, the authors drill into operational issues such as temporary soils and drainage structures, common equipment, and logistics. The content is primarily geared for the manager of a domestic or small commercial building construction project, but includes some reference to public and international work, where techniques, practices, and decision making can be substantially different. The book is structured into five sections and fifteen chapters. This facilitates ready adaptation either to industry training seminars or to university courses: Section I. The Project and Site Pre-Planning: The Construction Project and Site Environment (Randy R. Rapp); Due Diligence (Robert Cox); Site Organization and Layout (James O'Connor). Section II. The Site and Field Engineering Issues: Building Layout (Douglas Keith); Soil and Drainage Issues (Yi Jiang and Randy R. Rapp). Section III. Site Logistics: Site Logistical Procedures and Administration (Daphene Koch); Earthmoving (Douglas Keith); Material Handling Equipment (Bryan Hubbard). Section IV. Leadership and Control: Leadership and Communication (Bradley L. Benhart); Health, Safety, Environment (HSE), and Security (Jeffrey Lew); Project Scheduling (James Jenkins); Project Site Controls (Joseph Orczyk); Inspection and QA/QC (James Jenkins). Section V. Planning for Completion: Site-Related Contract Claims (Joseph Orczyk); Project Closeout (Randy R. Rapp).

Download or read book Intelligent Computing written by Kohei Arai and published by Springer Nature. This book was released on with total page 1269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive collection of chapters focusing on the core areas of computing and their further applications in the real world. Each chapter is a paper presented at the Computing Conference 2021 held on 15-16 July 2021. Computing 2021 attracted a total of 638 submissions which underwent a double-blind peer review process. Of those 638 submissions, 235 submissions have been selected to be included in this book. The goal of this conference is to give a platform to researchers with fundamental contributions and to be a premier venue for academic and industry practitioners to share new ideas and development experiences. We hope that readers find this volume interesting and valuable as it provides the state-of-the-art intelligent methods and techniques for solving real-world problems. We also expect that the conference and its publications is a trigger for further related research and technology improvements in this important subject. .

Download or read book Colliding Bodies Optimization written by A. Kaveh and published by Springer. This book was released on 2015-06-10 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and applies a novel efficient meta-heuristic optimization algorithm called Colliding Bodies Optimization (CBO) for various optimization problems. The first part of the book introduces the concepts and methods involved, while the second is devoted to the applications. Though optimal design of structures is the main topic, two chapters on optimal analysis and applications in constructional management are also included. This algorithm is based on one-dimensional collisions between bodies, with each agent solution being considered as an object or body with mass. After a collision of two moving bodies with specified masses and velocities, these bodies again separate, with new velocities. This collision causes the agents to move toward better positions in the search space. The main algorithm (CBO) is internally parameter independent, setting it apart from previously developed meta-heuristics. This algorithm is enhanced (ECBO) for more efficient applications in the optimal design of structures. The algorithms are implemented in standard computer programming languages (MATLAB and C++) and two main codes are provided for ease of use.

Download or read book Improving Site Productivity in the Construction Industry written by International Labour Office and published by . This book was released on 1987 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers aspects of work measurement, method study as well as work study as applied to the construction industry and deals with incentives. The book is based largely on Danish, Norwegian and Swedish experience, but is also intended to be applicable in any country.

Download or read book Construction Site Management and Labor Productivity Improvement written by H. Randolph Thomas and published by ASCE Press. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thomas and Ellis provide detailed, straightforward management practices to improve construction site activity and reduce losses in labor productivity from the most common site challenges.

Download or read book Process Plant Layout written by Sean Moran and published by Butterworth-Heinemann. This book was released on 2016-11-16 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Plant Layout, Second Edition, explains the methodologies used by professional designers to layout process equipment and pipework, plots, plants, sites, and their corresponding environmental features in a safe, economical way. It is supported with tables of separation distances, rules of thumb, and codes of practice and standards. The book includes more than seventy-five case studies on what can go wrong when layout is not properly considered. Sean Moran has thoroughly rewritten and re-illustrated this book to reflect advances in technology and best practices, for example, changes in how designers balance layout density with cost, operability, and safety considerations. The content covers the 'why' underlying process design company guidelines, providing a firm foundation for career growth for process design engineers. It is ideal for process plant designers in contracting, consultancy, and for operating companies at all stages of their careers, and is also of importance for operations and maintenance staff involved with a new build, guiding them through plot plan reviews. - Based on interviews with over 200 professional process plant designers - Explains multiple plant layout methodologies used by professional process engineers, piping engineers, and process architects - Includes advice on how to choose and use the latest CAD tools for plant layout - Ensures that all methodologies integrate to comply with worldwide risk management legislation

Download or read book Agent based Modeling and Simulation written by S. Taylor and published by Springer. This book was released on 2014-08-27 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operational Research (OR) deals with the use of advanced analytical methods to support better decision-making. It is multidisciplinary with strong links to management science, decision science, computer science and many application areas such as engineering, manufacturing, commerce and healthcare. In the study of emergent behaviour in complex adaptive systems, Agent-based Modelling & Simulation (ABMS) is being used in many different domains such as healthcare, energy, evacuation, commerce, manufacturing and defense. This collection of articles presents a convenient introduction to ABMS with papers ranging from contemporary views to representative case studies. The OR Essentials series presents a unique cross-section of high quality research work fundamental to understanding contemporary issues and research across a range of Operational Research (OR) topics. It brings together some of the best research papers from the esteemed Operational Research Society and its associated journals, also published by Palgrave Macmillan.

Download or read book Manual of Hospital Planning and Designing written by Ajay Garg and published by Springer Nature. This book was released on 2022-01-29 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a one-stop resource on all the critical aspects of planning and designing hospitals, one of the most complex healthcare projects to undertake. A well-planned and designed hospital should control infection rate, provide safety to patients, caregivers and visitors, help improve patients' recovery and have scope for future expansion and change. Reinforcing these basic principles, guidance on such effective planning and designing is the key focus. Readers are offered insights into eliminating shortcomings at every stage of setting up a hospital which may not be feasible to rectify later on through alterations. Chapters from 1 to 12 of the book provide exhaustive notes on initial planning, such as detailed project reports, feasibility studies, and area calculation. Chapters 13 to 27 include designing and layout of all the essential departments/units such as OPD, emergency, intermediate care, diagnostics, operating rooms, and intensive care units. Chapters 28 to 37 cover designing support services like sterilization department, pharmacy, medical gas pipeline, kitchen, laundry, medical record, and mortuary. Chapters 38 to 48 take the readers through planning other services like air-conditioning and ventilation, fire safety, extra low voltage, mechanical, electrical, and plumbing services. Chapter 49 is for the planning of medical equipment. A particular chapter on "Green" hospital designing is included. This book is a single essential tabletop reference for hospital consultants, medical and hospital administrators, hospital designers, architecture students, and hospital promoters.

Download or read book Facility Layout written by Miguel F. Anjos and published by Springer Nature. This book was released on 2021-04-24 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a structured approach to develop mathematical optimization formulations for several variants of facility layout. The range of layout problems covered includes row layouts, floor layouts, multi-floor layouts, and dynamic layouts. The optimization techniques used to formulate the problems are primarily mixed-integer linear programming, second-order conic programming, and semidefinite programming. The book also covers important practical considerations for solving the formulations. The breadth of approaches presented help the reader to learn how to formulate a variety of problems using mathematical optimization techniques. The book also illustrates the use of layout formulations in selected engineering applications, including manufacturing, building design, automotive, and hospital layout.

Download or read book Project Management for Construction written by Chris Hendrickson and published by Chris Hendrickson. This book was released on 1989 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Facility Location written by Zvi Drezner and published by Springer Science & Business Media. This book was released on 2004-05-03 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers both theory and applications of locational analysis (LocAn). The reader will see the power of LocAn models in various real-world contexts, varying from communication design to robotics and mail delivery. It is divided into two parts. The first part contains an overview of some of the LocAn methodologies. The second part describes in thorough detail some selected applications. The text provides researchers with an excellent and well thought-out review of available location models.

Download or read book Building Design and Construction Handbook written by Frederick S. Merritt and published by McGraw-Hill Companies. This book was released on 1982 with total page 1512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides updated, comprehensive, and practical information and guidelines on aspects of building design and construction, including materials, methods, structural types, components, and costs, and management techniques.

Download or read book Building Layout written by W. P. Jackson and published by . This book was released on 1979 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how to use a transit to locate a building correctly on the lot, plan proper grades with minimum excavation, find utility lines and easements, establish correct elevations, lay out accurate foundations, and set correct floor heights. Explains how to plan sewer connections, level a foundation that's out of level, use a story pole and batterboards, work on steep sites, and minimize excavation costs.

Download or read book Site Planning and Design Handbook 2e Pb written by Thomas Russ and published by McGraw-Hill Companies. This book was released on 2023-03-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Essential site planning and design strategies, up-to-date with the latest sustainable development techniques Discover how to incorporate sound environmental considerations into traditional site design processes. Written by a licensed landscape architect with more than 20 years of professional experience, this authoritative guide combines established approaches to site planning with sustainable practices and increased environmental sensitivity. Fully revised and updated, Site Planning and Design Handbook, Second Edition discusses the latest standards and protocols-including LEED. The book features expanded coverage of green site design topics such as water conservation, energy efficiency, green building materials, site infrastructure, and brownfield restoration. This comprehensive resource addresses the challenges associated with site planning and design and lays the groundwork for success. Site Planning and Design Handbook, Second Edition explains how to: Integrate sustainability into site design Gather site data and perform site analysis Meet community standards and expectations Plan for pedestrians, traffic, parking, and open space Use grading techniques to minimize erosion and maximize site stability Implement low-impact stormwater management and sewage disposal methods Manage brownfield redevelopment Apply landscape ecology principles to site design Preserve historic landscapes and effectively utilize vegetation

Download or read book Project Management for Facility Constructions written by Alberto De Marco and published by Springer Science & Business Media. This book was released on 2011-03-23 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes concepts, methods and practical techniques for managing projects to develop constructed facilities in the fields of oil & gas, power, infrastructure, architecture and the commercial building industries. It is addressed to a broad range of professionals willing to improve their management skills and designed to help newcomers to the engineering and construction industry understand how to apply project management to field practice. Also, it makes project management disciplines accessible to experts in technical areas of engineering and construction. In education, this text is suitable for undergraduate and graduate classes in architecture, engineering and construction management, as well as for specialist and professional courses in project management.

Download or read book Handbook for Construction Planning and Scheduling written by Andrew Baldwin and published by John Wiley & Sons. This book was released on 2014-06-23 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative industry guide on good practice for planning and scheduling in construction This handbook acts as a guide to good practice, a text to accompany learning and a reference document for those needing information on background, best practice, and methods for practical application. A Handbook for Construction Planning & Scheduling presents the key issues of planning and programming in scheduling in a clear, concise and practical way. The book divides into four main sections: Planning and Scheduling within the Construction Context; Planning and Scheduling Techniques and Practices; Planning and Scheduling Methods; Delay and Forensic Analysis. The authors include both basic concepts and updates on current topics demanding close attention from the construction industry, including planning for sustainability, waste, health and safety and Building Information Modelling (BIM). The book is especially useful for early career practitioners - engineers, quantity surveyors, construction managers, project managers - who may already have a basic grounding in civil engineering, building and general construction but lack extensive planning and scheduling experience. Students will find the website helpful with worked examples of the methods and calculations for typical construction projects plus other directed learning material. This authoritative industry guide on good practice for planning and scheduling in construction is written in a direct, informative style with a clear presentation enabling easy access of the relevant information with a companion website providing additional resources and learning support material. the authoritative industry guide on construction planning and scheduling direct informative writing style and clear presentation enables easy access of the relevant information companion website provides additional learning material.

Download or read book Creative Systems in Structural and Construction Engineering written by Amarjit Singh and published by CRC Press. This book was released on 2017-11-22 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: An examination of creative systems in structural and construction engineering taken from conference proceedings. Topics covered range from construction methods, safety and quality to seismic response of structural elements and soils and pavement analysis.