Download or read book AASHTO Guide for Design of Pavement Structures 1993 written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 1993 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
Download or read book Uses of Recycled Rubber Tires in Highways written by Jon A. Epps and published by Transportation Research Board. This book was released on 1994 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis on the use of recycled rubber tires in highways will be of interest to administrators and policy-makers; pavement, materials, geotechnical, environmental, and traffic operations engineers; and research engineers involved with highway design and construction issues. Information is provided on the uses of rubber tires in asphalt paving materials as well as other uses, such as on fills and embankments, for erosion control and on railroad grade crossings. Specifically, information is included which identifies the agencies using or implementing applications for recycled rubber tires and defines the design parameters, technical and construction limitations, performance, costs, benefits, environmental limitations, specifications, and availability. This synthesis of information defines the use of recycled rubber tires in highways and is based on a review of nearly 500 references and on information recorded from state highway agency responses to a 1991 survey of practice. Updates are included for as much of the state practice information possible through 1993. The use of scrap tires for highway applications is dynamic with regard to policy and technical issues. Therefore, the reader should keep in mind that the information presented reflects the best available data at a particular time. The synthesis also identifies current research in the topic area, critical research needs, and legislative issues that affect application and use of recycled rubber tires.
Download or read book Tire Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2021-03-25 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tire Waste and Recycling takes a methodical approach to the recycling of tires, providing a detailed understanding on how to manage, process, and turn waste tires into valuable materials and industrial applications. Sections cover fundamental aspects such as tire use, composition, trends, legislation, the current global situation, the possibilities for moving towards a circular economy, lifecycle options, treatment methods, and opportunities for re-use, recycling and recovery. Subsequent sections of the book focus on specific technologies that enable the utilization of waste tires in the development of high value materials and advanced applications. Finally, the future of tire recycling is considered. This is an essential resource for scientists, R&D professionals, engineers and manufacturers working in the tire, rubber, waste, recycling, automotive and aerospace industries. In academia, the book will be of interest to researchers and advanced scientists across rubber science, polymer science, materials engineering, environmental science, chemistry and chemical engineering. - Offers systematic coverage of tire recycling, covering composition, lifecycle, processing options, material developments and latest technologies - Explains end-of-life-options in detail, considering approaches and methods for reduction, re-use, recycling and recovery - Explores key application and product areas for recycled tire materials, from civil engineering, sports and leisure, to roads and transport, construction, automotive, and many more
Download or read book Functional Pavement Design written by Sandra Erkens and published by CRC Press. This book was released on 2016-10-14 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functional Pavement Design is a collections of 186 papers from 27 different countries, which were presented at the 4th Chinese-European Workshops (CEW) on Functional Pavement Design (Delft, the Netherlands, 29 June-1 July 2016). The focus of the CEW series is on field tests, laboratory test methods and advanced analysis techniques, and cover analysis, material development and production, experimental characterization, design and construction of pavements. The main areas covered by the book include: - Flexible pavements - Pavement and bitumen - Pavement performance and LCCA - Pavement structures - Pavements and environment - Pavements and innovation - Rigid pavements - Safety - Traffic engineering Functional Pavement Design is for contributing to the establishment of a new generation of pavement design methodologies in which rational mechanics principles, advanced constitutive models and advanced material characterization techniques shall constitute the backbone of the design process. The book will be much of interest to professionals and academics in pavement engineering and related disciplines.
Download or read book Asphalt Paving Technology written by Carl L. Monismith and published by McGraw-Hill Companies. This book was released on 1997-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on asphalt paving technology, this work emphasizes quality control and quality assurance programmes in producing high-quality pavements. It combines theory and practice of asphalt paving including developments and information from the recently completed Strategic Highway Research Program which was designed to improve asphalt specifications, mix design and analysis systems.
Download or read book Research Technology Transporter written by and published by . This book was released on 1998 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superpave Mix Design written by Asphalt Institute and published by . This book was released on 2001-01-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Asphalt Materials written by Shin-Che Huang and published by Woodhead Publishing. This book was released on 2015-04-08 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The urgent need for infrastructure rehabilitation and maintenance has led to a rise in the levels of research into bituminous materials. Breakthroughs in sustainable and environmentally friendly bituminous materials are certain to have a significant impact on national economies and energy sustainability. This book will provide a comprehensive review on recent advances in research and technological developments in bituminous materials. Opening with an introductory chapter on asphalt materials and a section on the perspective of bituminous binder specifications, Part One covers the physiochemical characterisation and analysis of asphalt materials. Part Two reviews the range of distress (damage) mechanisms in asphalt materials, with chapters covering cracking, deformation, fatigue cracking and healing of asphalt mixtures, as well as moisture damage and the multiscale oxidative aging modelling approach for asphalt concrete. The final section of this book investigates alternative asphalt materials. Chapters within this section review such aspects as alternative binders for asphalt pavements such as bio binders and RAP, paving with asphalt emulsions and aggregate grading optimization. - Provides an insight into advances and techniques for bituminous materials - Comprehensively reviews the physicochemical characteristics of bituminous materials - Investigate asphalt materials on the nano-scale, including how RAP/RAS materials can be recycled and how asphalt materials can self-heal and rejuvenator selection
Download or read book Proceedings of the 5th International Symposium on Asphalt Pavements Environment APE written by Marco Pasetto and published by Springer Nature. This book was released on 2019-08-29 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Crumb Rubber Modifier written by and published by . This book was released on 1993 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Section 1038 of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) contains provisions for each State to begin incorporating scrap tire rubber into their asphalt paving materials. A workshop was developed through the cooperation of highway agencies and the asphalt industry to discuss present procedures and practices for designing and constructing asphalt pavements which incorporate scrap tire rubber (crumb rubber modifier). These workshop notes were prepared from the proceedings of the 13 workshop sessions.
Download or read book Polymer Modified Bitumen written by Tony McNally and published by Elsevier. This book was released on 2011-09-15 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of polymers to bitumen allows the modification of certain physical properties, such as softening point, brittleness and ductility, of the bitumen. Polymer modified bitumen: Properties and characterisation provides a valuable and in-depth coverage of the science and technology of polymer modified bitumen.After an initial introduction to bitumen and polymer modified bitumen, the book is divided into two parts. Chapters in part one focus on the preparation and properties of a range of polymer modified bitumen, including polymer bitumen emulsions, modification of bitumen with poly (urethanes), waste rubber and plastic and polypropylene fibres. Part two addresses the characterisation and properties of polymer modified bitumen. Chapter topics covered include rheology, simulated and actual long term ageing studies; the solubility of bituminous binders in fuels and the use of Fourier transform infrared spectroscopy to study ageing/oxidation of polymer modified bitumen.Polymer modified bitumen is an essential reference for scientists and engineers, from both academia and the civil engineering and transport industries, interested in the properties and characterisation of polymer modified bitumen. - Provides a comprehensive and in-depth coverage of the science and technology of polymer modified bitumen - Focuses on the preparation and properties of a range of polymer modified bitumen, including emulsions, modification of bitumen with poly(urethanes), waste rubber and plastic as well as polypropylene fibres - Addresses the characterization and properties of polymer modified bitumen, including rheology, simulated and actual long term ageing studies, and the solubility of bituminous binders in fuels
Download or read book Advanced Asphalt Materials and Paving Technologies written by Zhanping You and published by MDPI. This book was released on 2018-05-04 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advanced Asphalt Materials and Paving Technologies" that was published in Applied Sciences
Download or read book Introduction to Unmanned Aircraft Systems Second Edition written by Douglas M. Marshall and published by CRC Press. This book was released on 2015-10-26 with total page 1944 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proliferation of technological capability, miniaturization, and demand for aerial intelligence is pushing unmanned aerial systems (UAS) into the realm of a multi-billion dollar industry. This book surveys the UAS landscape from history to future applications. It discusses commercial applications, integration into the national airspace system (NAS), System function, operational procedures, safety concerns, and a host of other relevant topics. The book is dynamic and well-illustrated with separate sections for terminology and web- based resources for further information.
Download or read book Road Engineering for Development written by Richard Robinson and published by CRC Press. This book was released on 2018-10-09 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing countries in the tropics have different natural conditions and different institutional and financial situations to industrialized countries. However, most textbooks on highway engineering are based on experience from industrialized countries with temperate climates, and deal only with specific problems. Road Engineering for Development (published as Highway and Traffic Engineering in Developing Countries in its first edition) provides a comprehensive description of the planning, design, construction and maintenance of roads in developing countries. It covers a wide range of technical and non-technical problems that may confront road engineers working in this area. The technical content of the book has been fully updated and current development issues are focused on. Designed as a fundamental text for civil engineering students this book also offers a broad, practical view of the subject for practising engineers. It has been written with the assistance of a number of world-renowned specialist professional engineers with many years experience in Africa, the Middle East, Asia and Central America.
Download or read book Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements written by Xueyan Liu and published by CRC Press. This book was released on 2021-12-24 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements contains 124 papers from 14 different countries which were presented at the 5th International Symposium on Frontiers of Road and Airport Engineering (IFRAE 2021, Delft, the Netherlands, 12-14 July 2021). The contributions focus on research in the areas of "Circular, Sustainable and Smart Airport and Highway Pavement" and collects the state-of-the-art and state-of-practice areas of long-life and circular materials for sustainable, cost-effective smart airport and highway pavement design and construction. The main areas covered by the book include: • Green and sustainable pavement materials • Recycling technology • Warm & cold mix asphalt materials • Functional pavement design • Self-healing pavement materials • Eco-efficiency pavement materials • Pavement preservation, maintenance and rehabilitation • Smart pavement materials and structures • Safety technology for smart roads • Pavement monitoring and big data analysis • Role of transportation engineering in future pavements Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements aims at researchers, practitioners, and administrators interested in new materials and innovative technologies for achieving sustainable and renewable pavement materials and design methods, and for those involved or working in the broader field of pavement engineering.
Download or read book Polymer Modified Asphalt Binders written by Kenneth R. Wardlaw and published by ASTM International. This book was released on 1992 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: "ASTM Publication Code Number (PCN) 04-011080-08. - "Sponsored by ASTM Committee D-4 on Road and Paving Materials."-- Foreword. - Includes bibliographical references and indexes. - Electronic reproduction; W. Conshohocken, Pa; ASTM International; 2011; Mode of access: World Wide Web; System requirements: Web browser; Access may be restricted to users at subscribing institutions.
Download or read book Evaluation of the Use of Rubber Modified Asphalt Concrete Pavement in the State of Illinois written by and published by . This book was released on 1992 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
