Download or read book Construction in Cold Regions written by Terry T. McFadden and published by John Wiley & Sons. This book was released on 1992-04-16 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written as a reference on effective engineering practice for construction activities in Arctic and Sub-Arctic regions. It is based on many sources around the world including the Soviet Union and China where people live and work in very low temperatures. Provides a broad look at overall problems found by engineers, contractors and builders, including case histories that illustrate actual projects throughout the cold regions of the world.

Download or read book Introduction to Cold Regions Engineering written by Dean R. Freitag and published by American Society of Civil Engineers. This book was released on 1997-01-01 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended to introduce the special principles and practices needed for successful design and construction in cold environments, this comprehensive text examines the adaptation of engineering specialties and disciplines to the particular requirements caused by freezing temperatures. Each chapter includes a section of "First Principles" providing fundamental analysis of cold regions problems. Soil mechanics, hydraulics, thermodynamics, and heat flow are covered in detail.

Download or read book Builder s Guide to Cold Climates written by Joseph W. Lstiburek and published by Taunton. This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents the best techniques for energy and resource efficient residential construction in the colder climates of North America. Lstiburek (a forensic engineer who heads Building Science Corp. in Massachusetts) presents information on the practicalities of choosing the right insulation, heating systems, keeping heat in, air and moisture barriers, exterior wood priming, avoiding cold corners and plates, sealing air barriers, considering drainage planes behind siding, avoiding insulation gaps, and flashing window openings. Contains many diagrams. Spiral wire binding.

Download or read book Cold Regions Construction written by Technical Council on Cold Regions Engineering and published by . This book was released on 1983 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Science for a Cold Climate written by N. B. Hutcheon and published by Wiley-Interscience. This book was released on 1983 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at understanding the design and performance of building enclosures and their inside environment in cold climates. The information and examples presented relate mainly to Canada.

Download or read book Cold Region Structural Engineering written by Esa M. Eranti and published by . This book was released on 1986 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights newest design and construction techniques giving guidance on such topics as ice forces on structures, snow and icing problems, earthworks and foundation construction in permafrost, special design considerations for seasonal frost areas, moisture and condensation control, protection of underground utility lines, and construction during winter in arctic and subarctic regions.

Download or read book Cold climate Buildings Design Guide written by Ashrae and published by Ashrae. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings in arctic and subarctic climates face unique challenges, not only the cold,but also remoteness, limited utilities, permafrost, and extreme temperature shifts.Built structures must meet these challenges while maintaining occupant comfort and, ifpossible, minimizing impact on the environment. Harmonizing human comfort with theclimatic realities of these environments can be a delicate balancing act. Strategic designis key to building, commissioning, and operating efficient and long-lasting cold-climatestructures. This unified guide to cold-climate design provides expert knowledge on theissues commonly faced in arctic and subarctic climates.In addition to cold-climate considerations in HVAC calculations and system design, this book¿s chapters cover sustainability, controls, building design, and commissioning, all from this distinctive climatic perspective. The book also includes an appendix with seven case studies of buildings located in cold and extreme cold climates. These buildings are leaders in their field with regard to both efficiency and cold-climate design.Aimed at each member of the building team, from the designer and architect to thecommissioning authority, Cold-Climate Buildings Design Guide will serve as a valuableresource from the initial planning to completion of cold-climate buildings.

Download or read book Adobe Homes for All Climates written by Lisa Schroder and published by Chelsea Green Publishing. This book was released on 2010-09-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lay-up of adobe bricks is an easy, forgiving way to achieve a solid masonry-wall system. Contrary to stereotypes, adobe is perfectly adaptable for use in cold, wet climates as well as hot and dry ones, and for areas prone to earthquakes. With its efficient use of energy, natural resources for construction, and minimal effort for long-term maintenance, it’s clear that the humble adobe brick is an ideal option for constructing eco-friendly structures throughout the world. The book is ideal both for first-time do-it-yourselfers and for experienced adobe builders seeking to improve their craft. Drawing on the experience of more than fifty major adobe projects since 1993, Adobe Homes for All Climates describes Adobe Building Systems’ patented reinforcement and scaffolding systems, showing readers how to construct adobe homes more easily and safely, and with superior strength, durability, structural integrity, and aesthetic appeal, as compared to earthen homes of the past. All aspects of adobe construction are covered, including making and laying adobe bricks, installing lintels and arches, conduits and pipes, doors and windows, top plates and bondbeams, ideal wall dimensions, adobe finishes, and other adobe construction components, such as the inexpensive use of scaffolding. These methods will produce a premium product that will meet and often exceed inspection standards. Equipped with this manual, you will be able to obtain a building permit, make adobe bricks swiftly, and confidently lay them up. You will be able to beautifully finish your adobe walls with earth plasters creating stunning colors and outstanding light effects and create a beautiful, energy-efficient home that will last for generations to come.

Download or read book Cold Climate HVAC 2018 written by Dennis Johansson and published by Springer. This book was released on 2018-12-12 with total page 1095 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the 9th Cold Climate HVAC conference, which was held in Kiruna, Sweden in 2018. The conference highlighted key technologies and processes that allow scientists, designers, engineers, manufacturers and other decision makers in cold climate regions to achieve good indoor environmental quality (IEQ) with a minimum use of energy and other resources. The conference addressed various technical, economic and social aspects of buildings and HVAC systems in new and renovated buildings. This proceedings volume gathers peer-reviewed papers by a diverse and international range of authors and showcases perspectives and practices in cold climate building design from around the globe. The following major aspects, which include both fundamental and theoretical research as well as applications and case studies, are covered: (1) Energy and power efficiency and low-energy buildings; (2) Renovating buildings; (3) Efficient HVAC components; (4) Heat pumps and geothermal systems; (5) Municipal and city energy systems; (6) Construction management; (7) Buildings in operation; (8) Building simulation; (9) Reference data; (10) Transdisciplinary connections and social aspects; (11) Indoor environments and health; (12) Moisture safety and water damage; (13) Codes, regulations, standards and policies; and (14) Other aspects of buildings in cold climates.

Download or read book Cold Weather Construction of Rights of way for Roads written by N Ya Kharkhuta and published by . This book was released on 1972 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a rule, during the winter, the fill should be built up from loose soils. The use of cohesive soils is basically possible, but always involves considerable difficulties. In those cases when supersaturated loose soils are used for constructing fill, the established standards for density can not be achieved. As a result of the inadequate compaction of soils and their excessive wetting, such embankments become unstable when exposed to freeze-thaw cycles. Their stability is manifested in the fact that the frost upheavals of the roadbed surface exceeds the tolerable limits causing stresses and disruptions to appear in the road coverings built on the roadbed. (Author).

Download or read book Cold Regions Engineering written by Kelly S. Merrill and published by . This book was released on 2002 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 92 papers presented at the 11th International Conference on Cold Regions Engineering, held in Anchorage, Alaska, May 20-22, 2002.

Download or read book Foundations of Structures in Cold Regions written by Frederick J. Sanger and published by . This book was released on 1969 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The monograph describes the various kinds of foundations used for structures on permafrost with a brief discussion of foundations in areas of seasonal frost. Special attention is given to piled foundations in permafrost and the design of ventilation systems for controlling thaw under heated buildings. Appendixes outline techniques for computing the depth of freezing or of thawing, the design of refrigeration systems for artificial freezing, and the recommended procedure in the USSR for static pile tests. Included in the main text are 51 figures and 62 selected references. (Author).

Download or read book Five Historical Cold Regions Construction Projects written by University of Alaska Fairbanks. School of Engineering and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Durability of Concrete in Cold Climates written by M. Pigeon and published by CRC Press. This book was released on 2014-04-21 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and authoritative review of durability of the frost resistance of concrete. It will enable both concrete materials specialists and practising engineers to better understand the deterioration processes which take place during freezing and thawing, and the effects of de-icing salts on concrete. It shows how test pro

Download or read book Increasing Cold Weather Masonry Construction Productivity written by and published by . This book was released on 1997 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thermal protection requirements for cold weather masonry, as established in current industry specifications, were evaluated. Experiments were conducted to define the most relevant factors in the process of freezing of newly placed mortar. The effect of unit absorption on the moisture content of mortar during the first hours after assembly was assessed. Correlations of moisture content with time were developed for mortar in contact with masonry units. Frost immunity thresholds in terms of mortar moisture content and in terms of maturity were determined. The test results provided the basis for new proposed guidance on when fresh mortar can be safely exposed to freezing temperatures. Test methods for evaluation of the freeze thaw resistance of masonry units were evaluated. A new test was proposed and adopted by ASTM as a new standard test for the freeze thaw testing of masonry units. In addition, several chemicals were evaluated for their potential as antifreeze admixtures for masonry mortar. Antifreeze admixtures were first developed for use in concrete, but the practicality of using antifreeze admixtures in masonry mortars was demonstrated in a field application in Michigan during the winter.

Download or read book Moisture Control Handbook written by Joseph Lstiburek and published by John Wiley & Sons. This book was released on 1996-01-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the climate-controlled buildings of today, moisture problemsaffect not only the useable life expectancy of the structure, butthe comfort and health of the occupants. This reference is thefirst to apply up-to-date moisture control and treatment techniquesin a problem/solution format. Opening with an introductoryexplanation of the nature and causes of mold, mildew, andcondensation, the book gives specific advice on heated, cooled, andcombination environments, plus a short course in the dynamics ofmoisture movement within buildings. Other invaluable coverageincludes: * clear, detailed recommended practices for all United Statesclimates * practices for cooling as well as heating climates (often, heatingclimate solutions are applied in cooling climates, where problemsand solutions are completely different) * an overall, systematic view of moisture problems--including howmechanical systems and occupant lifestyles can create and alsoresolve moisture problems * actual case studies of buildings with moisture problems thatillustrate the principles and practices presented in the book This detailed, no-nonsense exploration of moisture cause andeffect--as well as its protection and remediation--will expandreaders' knowledge on this crucial subject. Moisture ControlHandbook will be welcomed by building contractors, architects,mechanical engineers, building science researchers, buildingproduct manufacturers, homeowners, and small commercial buildingowners.

Download or read book Cold Regions Pavement Engineering written by Hannele Zubeck and published by McGraw-Hill Education. This book was released on 2008-11-18 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build Roads That Stand Up to Any Weather Condition The first book dedicated solely to this important topic, Cold Regions Pavement Engineering helps ensure that road quality is not compromised by cold temperatures and other environmental factors. Using the latest research from the United States, Canada, and Europe, the authors supply all the information needed to make wise decisions in situations where freezing temperatures, unstable soil, precipitation, ice, and small populations are complicating factors, along with limited funding-a common problem when designing roads in cold regions. Posing specific design and maintenance problems encountered in the field, the authors present the techniques and materials to solve them. Cold Regions Pavement Engineering is a long-needed resource. Inside: Design methodologies and maintenance techniques Key information on material selection Calculations for proper structural design Strategies for constructing new roads Advice in rehabilitating old or damaged surfaces Case studies of problems and their solutions Cold Regions Pavement Engineering includes: • Pavement Materials and Performance • Investigation and Testing o Calculation of Engineering Parameters • Design Considerations • Mix and Pavement Design • Maintenance and Rehabilitation • Pavements on Permafrost