Download or read book Construction Estimating and Bidding Training Manual to Acquire Fundamental Knowledge in Estimating Building Construction Costs written by Yvon Chabot and published by Independently Published. This book was released on 2019-03-05 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to enable students to gain fundamental knowledge of estimating the cost of building construction projects. The procedures used for estimating vary form company to company. On the other hand, the construction industry has become, over the years, more competitive which has made construction companies to do their best in order to offer the best possible service at the least price. To overcome this constraint, it is necessary to know precisely the cost of services. And it would be the role of an Estimator. Unfortunately, there are no specific rules, as it accounts, for obtaining a good estimate, even among individuals within a company. Because of contracting method currently employed (like fast track or PPP) construction companies need precision in their estimates; in addition, as estimators are increasingly consulted at conceptual design stage, we will talk about conceptual estimate in chapter one and then focus on detailed estimations and its process in upcoming chapters.We all know that a good estimator needs to have a good knowledge about construction techniques and factors that influence the realization of a project. We also know that an individual who possesses a high level of experience in his/her field but also could be a poor estimator in the absence of reliable method. So, in this manual we will focus more on estimations' method rather than techniques of construction.A detailed estimate ( Bid Estimate ) can be analyzed in terms of the SIX principal stages of the process:1.Quantity Takeof2.Recap Quantities3.Pricing the Recap4.Pricing Subcontractor's work5.Pricing General Expenses6.Summary and BidTo decode these six steps into an effective and accurate estimation method, the manual is divided into three modules. Each module is divided into chapters. The first module addresses the preparation of an estimate for construction and describes the entire submission process. The second module deals with the methods of measurement of the constructive systems then, in the third module, establish the prices of the elements, the expenses of the general conditions and finally, close the submission.
Download or read book Construction Cost Estimating written by Len Holm and published by Routledge. This book was released on 2021-04-07 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Cost Estimating equips a new generation of students and early-career professionals with the skills they need to bid successfully on projects. From developing bid strategies to submitting a completed bid, this innovative textbook introduces the fundamentals of construction estimating through a real-life case study that unfolds across its 24 chapters. Exercises at the end of each chapter offer hands-on practice with core concepts such as quantity take-offs, pricing, and estimating for subcontractor work. Online resources provide instant access to examples of authentic construction documents, including complete, detailed direct work estimates, subcontractor work estimates, general conditions estimates, markups, and summary schedules. Through its unique mix of real-world examples and classroom-tested insights, Construction Cost Estimating ensures that readers are familiar with the entire estimating process even before setting foot on the jobsite.
Download or read book How to Estimate with RSMeans Data written by Saleh A. Mubarak and published by John Wiley & Sons. This book was released on 2012-04-04 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using North America's most recognized construction cost data from RSMeans, this step-by-step guide develops problem-solving skills through over 300 sample problems and exercises. All of the major construction items, including site work, concrete and masonry, wood and metal framing, doors and windows, and more are covered. Access to a password-protected web site is included, which contains the instruction version of RSMeans Cos/Works, the electronic version of RS Means Building Construction Cost Data, and sample building plans and spreadsheets, enabling you to practice creating a complete construction estimate.
Download or read book Estimating Building Costs for the Residential and Light Commercial Construction Professional written by Wayne J. Del Pico and published by John Wiley & Sons. This book was released on 2023-08-08 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Estimating Building Costs Few aspects of a construction project are more fundamental than the cost estimate, which can mean the difference between a professionally executed project and a financial and legal disaster. Properly handled, a construction cost estimate can protect both the contractor and the client from losing money on a project. The estimate is the first step toward a successful project. For contractors, therefore, the knowledge required to construct an accurate price estimate is critical. Estimating Building Costs for the Residential and Light Commercial Construction Professional provides this knowledge in a thorough and comprehensive guide. It takes readers step-by-step through the process of constructing a cost estimate, and provides guidance for incorporating cost estimates into budgeting, scheduling, project management, and more. The result is a fundamental guide to this critical aspect of the construction industry. Readers of the third edition of Estimating Building Costs for the Residential and Light Commercial Construction Professional will also find: Fully updated text to reflect the new CSI MASTERFORMATTM 2020 Analysis of cost considerations, quantity takeoff, pricing, and more Step-by-step guidance for developing a comprehensive cost estimate All-new sections covering scope of work, wage scales in the US, and a project overhead checklist Considerations for adding profit and contingencies to an estimate Estimating Building Costs for the Residential and Light Commercial Construction Professional is an essential resource for contractors in residential and light commercial construction, as well as students studying construction management and construction estimating.
Download or read book Construction Estimating written by Karl F. Schmid and published by Momentum Press. This book was released on 2011-09-30 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pocket-sized book is a concise guide to the basics of estimating construction costs for residential and light commercial building projects. It provides a step-by-step guide to estimating the total cost of a construction project. It takes readers through five phases that lead to a successful estimate: initial assessment, work analysis, programming, costing and cost distribution and summarization. The book's primary targets are small contractors; however, the principles set forth in the book are applicable to all contractors. The book could also serve as a textbook for estimating classes in construction management programs at universities and community colleges. The last section of the book provides useful but not readily available information for estimators on diverse topics, e.g., detailed information about Value Engineering, scheduling, subcontractor selection, bid summarization, and so on. An extensive glossary of construction terms is also included. Readers in all construction capacities will find: * A new, fresh look at the often baffling and deceptive job of estimating construction costs for residential and light commercial construction * How to assess plans, review bonds, and evaluate the site and the project schedule before beginning a cost take-off * How to integrate a cost estimate into a general accounting program for cost management and eventual billing * Incredibly helpful appendix with common construction standards and measurements--from standards for concrete forms, to nail sizes to commercial lumber sizes, and much more!
Download or read book Fundamentals of Construction Estimating written by David J. Pratt and published by . This book was released on 1995 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Estimating Building Costs written by Calin M. Popescu and published by CRC Press. This book was released on 2003-04-22 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Companies live or die on the basis of estimating their costs. Preparing estimates and bidding for new jobs is a complex and often costly process. There is no substitute for on the job training -- until now. Drawing on the authors' combined experience of more than 70 years, Estimating Building Costs presents state-of-the-art principles, practices, and techniques for assessing these expenditures that can be applied regardless of changes in the costs of materials, equipment, and labor. The book is an efficient and practical tool for developing contracts or controlling project costs. The authors cover the major components of the direct cost: estimating procedures and cost trends related to materials, construction equipment, and skilled and unskilled labor. They describe various types of building estimates encountered during the lifecycle of a project, as well as the role and accuracy of each. The book provides an overview of the industry, cost indexes in use, approaches to preparing a detailed estimate, and an in-depth description of the organization and function of the estimating group. Including CSI Master Format and UniFormat codes, estimating forms, a list of available estimating software packages, a detailed construction site and investigation report, the book provides a cost estimating methodology that readers can tailor to their own organizational needs.
Download or read book How to Estimate with RSMeans Data written by RSMeans and published by John Wiley & Sons. This book was released on 2020-03-31 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, hands-on guide to real-world construction estimating How to Estimate with RSMeans Data is the only instructional book on construction cost estimating that uses the most popular source of construction cost data, RS Means. This updated fifth edition includes new coverage on the role of Building Information Modeling (BIM) in the estimating process, and over 300 sample problems and exercises that show you how to apply cost data to your building project based on the RS Means 2015 Building Construction Cost Data. The companion website provides access to RS Means CostWorks data, allowing you to use real-world numbers in your practice estimates, and the included Instructor's Manual provides step-by-step solutions to problems in the book. Focused on the practical aspects of estimating, this book emphasizes the application of estimating techniques—which are transferable to any estimating software—through problem solving and the ground-up creation of complete construction project estimates. Estimating skills are fundamental to the construction industry, and are applied by all parties at all levels throughout the industry. This book is a hands-on guide to the techniques and tools used to create a thorough estimate, with plenty of opportunities for practice. Apply cost data to all aspects of the building project Practice your skills on over 300 sample problems Construct a complete estimate using RSMeans Besides being an essential construction skill, learning estimating helps you become familiar with reading and understanding construction blueprints and how construction assemblies are built. Mastery of these vital skills is important to your future career, and How to Estimate with RSMeans Data is your ideal guide to a solid foundation.
Download or read book Estimating Bidding for Builders Remodelers written by Richard J. Langedyk and published by Estimating & Bidding for Build. This book was released on 2008-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here's a book that covers the construction estimating and bidding process - planning your estimate, adjusting your markup and adding it to your bid, reviewing the plans for hidden costs, recording job costs, compiling and checking an estimate, applying unit costs, the take-off process, calculating overhead, estimating repair and remodeling work, and estimating commercial work. Explains how to estimate with a computer and includes a CD-ROM with the database of 50,000 construction items from the National Construction Estimator and the National Home Improvement Estimator. QuickBooks Pro for job costing, and an interactive tutorial.
Download or read book Fundamentals of Construction Estimating and Cost Accounting written by Keith Collier and published by Prentice Hall. This book was released on 1974 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual on construction industry cost accounting in the USA - demonstrates how to estimate labour cost, equipment cost, overhead cost, etc., and includes measurement techniques. Bibliography pp. 262 to 265, diagrams, illustrations, references.
Download or read book Building Construction Estimating written by Stephen D. Schuette and published by McGraw-Hill Companies. This book was released on 1994 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Construction Estimating furnishes readers with specific details on how a general building contractor derives the cost of a project before it begins, and how the estimate fits into the total construction process. The book provides coverage of such areas as determining labor productivity and wages, selecting equipment and assigning productivity rates and costs, acquiring specialty contractor prices, and assigning overhead costs and profit. The material is presented from the point of view of a general contractor working on a competitively bid stipulated-sum (lump-sum) contract. However, other contract methods and the effects they have on the estimating process are also discussed. Furthermore, the principles of estimating for the specialty trades are discussed from the reference of a general building contractor, and how the subcontractor's bid will affect the total project cost is presented. Of special note is the book's introduction and utilization of computers in the estimating process - enabling readers to utilize new technology in an effective and efficient manner. The book is organized in a way that first teaches the reader to perform many of the estimating activities manually, then guides them in developing a computer spreadsheet. The use of spreadsheets empowers the reader to go beyond the manual calculations and develop new and more proficient solutions to estimating problems.
Download or read book Construction Cost Estimating written by Len Holm and published by . This book was released on 2021-04 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Construction Cost Estimating equips a new generation of students and early-career professionals with the skills they need to bid successfully on projects. From developing bid strategies to submitting a completed bid, this innovative textbook introduces the fundamentals of construction estimating through a real life case study that unfolds across its 24 chapters. Construction Cost Estimating ensures that readers are familiar with the entire estimating process before they even set foot on the jobsite"--
Download or read book Essentials of Heavy Construction Estimating written by Lance Destwolinski and published by . This book was released on 2018-12-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the essential skills one must develop to succeed in the construction business is estimating. There are several factors that go into winning contracts at a buildable and profitable value, but the primary factor is an estimate that is well thought out and executed. Estimating is a combination of cost accounting, engineering skills, and the art of visualizing how things are built. With this in mind, the book will focus on the fundamentals and key processes that give an estimator the ability to dissect a project into quantities, work components, schedules, risks, etc. that allow an estimator to provide management with a competitive and buildable cost evaluation. This book-by a construction professional-focuses on estimating for the submittal of a firm or hard money bid on design-bid-build projects. Whether you're an engineering student, estimator, architect, professional engineer or construction professional, there are key fundamentals and processes presented that can be beneficial to you.
Download or read book Walker s Quantity Surveying and Basic Construction Estimating written by Frank R. Walker Company and published by . This book was released on 1981 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by the faculty of University of Florida Construction Department & used as an introductory estimating course in conjunction with Walker's Building Estimator's Reference Book, this text guides the reader through a proven method of quantity surveying & estimating. This standardized method allows several estimators to work on the same project without confusion or loss of time & lets one estimator take over an unfinished estimate & understand what has been completed. The text reviews construction contracts, insurance & bonds. It discusses geometric shapes & conversion factors, & valuable tables aid the user in determining material quantities. It explains preparation of plans for survey, how to read plans & locate sections, & how to convert inches to decimals of a foot. It provides the reader with a method of estimating quantities & costs of concrete, formwork, reinforcing steel, masonry, earthwork, & carpentry. For residential construction.
Download or read book Walker s Manual for Construction Cost Estimating written by Vick S. Crespin and published by Frank R. Walker Company. This book was released on 1981 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Estimating Construction Costs written by Robert Peurifoy and published by McGraw-Hill Higher Education. This book was released on 2013-01-31 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: In preparing the sixth edition of Estimating Construction Costs the author has retained the fundamental concepts of estimating that have made the book successful for many years. All of the example problems have been revised with more explanations regarding assumptions used in the calculations. This edition has reorganized and consolidated chapters to increase the clarity of the subject matter for the reader. Extensive new sections have been added on equipment, including graders equipped with GPS, and methods of calculating depreciation, investment, and operating costs of construction equipment. The computer estimating chapter is revised with additional material on the use of computers in preparing estimates for bidding purposes.
Download or read book Estimating and Bidding for Heavy Construction written by Stuart H. Bartholomew and published by . This book was released on 2000 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disk contains: CSUC, CHICO Cost-estimating program, LOAD-AND-HAUL programs for off-highway end-dump trucks and push-loaded scrapers, and an indirect cost computer spreadsheet template.
