Download or read book Constitutive Modelling of Solid Continua written by José Merodio and published by Springer Nature. This book was released on 2019-11-14 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of a collection of chapters by recognized experts to provide a comprehensive fundamental theoretical continuum treatment of constitutive laws used for modelling the mechanical and coupled-field properties of various types of solid materials. It covers the main types of solid material behaviour, including isotropic and anisotropic nonlinear elasticity, implicit theories, viscoelasticity, plasticity, electro- and magneto-mechanical interactions, growth, damage, thermomechanics, poroelasticity, composites and homogenization. The volume provides a general framework for research in a wide range of applications involving the deformation of solid materials. It will be of considerable benefit to both established and early career researchers concerned with fundamental theory in solid mechanics and its applications by collecting diverse material in a single volume. The readership ranges from beginning graduate students to senior researchers in academia and industry.
Download or read book Constitutive Modelling of Granular Materials written by Dimitrios Kolymbas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of its extreme complexity the mathematical description of the mechanical behaviour of granular materials is an extremely difficult task. Today many different models compete with each other. However, the complexity of the models hinders their comparison, and the potential users are confused and, often, disencouraged. This book is expected to serve as a milestone in the present situation, to evaluate the present methodes, to clear up the situation, to focus and encourage for further research activities.
Download or read book Advanced Methods of Continuum Mechanics for Materials and Structures written by Konstantin Naumenko and published by Springer. This book was released on 2016-05-12 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of contributions on advanced approaches of continuum mechanics, which were written to celebrate the 60th birthday of Prof. Holm Altenbach. The contributions are on topics related to the theoretical foundations for the analysis of rods, shells and three-dimensional solids, formulation of constitutive models for advanced materials, as well as development of new approaches to the modeling of damage and fractures.
Download or read book Fundamentals Of Continuum Mechanics written by Zishun Liu and published by World Scientific. This book was released on 2024-02-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a concise yet rigorous treatment of continuum mechanics at the introductory level. It differs from traditional textbooks by combining tensor analysis with mechanical analysis and teaching the former's basics within a single chapter. Readers of this book are not required to have learned tensor analysis in the context of engineering mathematics beforehand.The basic objectives of continuum mechanics are included in this textbook to facilitate an easy and thorough understanding of the concepts of continuum mechanics and elasticity. In addition, the mathematics and physics of deformation and kinematics are introduced and studied from the concept of stretch rather than from the traditional approach of strain. The large deformation problem of new smart soft materials is also introduced.This textbook provides illustrative examples and problem sets that enable readers to test their understanding of the subject matter and utilize the tools developed in the formulation of engineering problems. It is suitable for students whose undergraduate disciplines are non-mechanics-related fields. It also helps students or engineers who use the finite element method (FEM) to analyze problems to interpret the results produced by FEM software.
Download or read book Cyclic Plasticity of Engineering Materials written by Guozheng Kang and published by John Wiley & Sons. This book was released on 2017-03-10 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: New contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity models for metals, polymers, particle reinforced metal matrix composites and shape memory alloys. Also, the thermo-mechanical coupled cyclic plasticity models are discussed for metals and shape memory alloys. Key features: Provides a comprehensive introduction to cyclic plasticity Presents Macroscopic and microscopic observations on the ratchetting of different materials Establishes cyclic plasticity constitutive models for different materials. Analysis of cyclic plasticity in engineering structures. This book is an important reference for students, practicing engineers and researchers who study cyclic plasticity in the areas of mechanical, civil, nuclear, and aerospace engineering as well as materials science.
Download or read book Classical Continuum Mechanics written by Karan S. Surana and published by CRC Press. This book was released on 2022-01-24 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides physical and mathematical foundation as well as complete derivation of the mathematical descriptions and constitutive theories for deformation of solid and fluent continua, both compressible and incompressible with clear distinction between Lagrangian and Eulerian descriptions as well as co- and contra-variant bases. Definitions of co- and contra-variant tensors and tensor calculus are introduced using curvilinear frame and then specialized for Cartesian frame. Both Galilean and non-Galilean coordinate transformations are presented and used in establishing objective tensors and objective rates. Convected time derivatives are derived using the conventional approach as well as non-Galilean transformation and their significance is illustrated in finite deformation of solid continua as well as in the case of fluent continua. Constitutive theories are derived using entropy inequality and representation theorem. Decomposition of total deformation for solid and fluent continua into volumetric and distortional deformation is essential in providing a sound, general and rigorous framework for deriving constitutive theories. Energy methods and the principle of virtual work are demonstrated to be a small isolated subset of the calculus of variations. Differential form of the mathematical models and calculus of variations preclude energy methods and the principle of virtual work. The material in this book is developed from fundamental concepts at very basic level with gradual progression to advanced topics. This book contains core scientific knowledge associated with mathematical concepts and theories for deforming continuous matter to prepare graduate students for fundamental and basic research in engineering and sciences. The book presents detailed and consistent derivations with clarity and is ideal for self-study.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1987 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Time Domain Scattering written by P. A. Martin and published by Cambridge University Press. This book was released on 2021-06-24 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first thorough synthesis of methods for solving time-domain scattering problems, covering both theoretical and computational aspects.
Download or read book State of the Art and Future Trends in Material Modeling written by Holm Altenbach and published by Springer Nature. This book was released on 2019-10-23 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special anniversary book celebrates the success of this Springer book series highlighting materials modeling as the key to developing new engineering products and applications. In this 100th volume of “Advanced Structured Materials”, international experts showcase the current state of the art and future trends in materials modeling, which is essential in order to fulfill the demanding requirements of next-generation engineering tasks.
Download or read book Shallow Foundations and Soil Constitutive Laws written by Swami Saran and published by CRC Press. This book was released on 2017-12-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a systematic analysis of footings (i.e. shallow foundations) in a realistic way, using constitutive relationships of the soil. The aim of the book is to deal with the theme holistically, involving the determination of the constitutive law of the soil, and then proportioning the footing occurring in different situations in actual practice. The book has eleven chapters. After giving an introduction and scope of the book in the first chapter, second and third chapters are respectively devoted to constitutive laws of soil and basic stress equations. In the third chapter analysis of strip footings subjected to central vertical load has been dealt. This analysis has been extended for eccentric –inclined load in the fifth chapter. Since problems of shallow foundations resting adjacent to a slope are of prime importance, this aspect has been dealt in sixth chapter. In the seventh chapter, analysis pertaining to square and rectangular footings have been presented. Effect of interference between adjacent footing is covered in chapter eight. Since ring footings are usually provided for tanks, silos, towers etc., ninth chapter is devoted to this. Added attraction of the book is its chapter ten in which footings located in seismic regions have been covered. Effect of embedment below the ground surface on the behavior of footings located both in non-seismic and seismic regions has been dealt in the chapter eleven. The book is intended for senior undergraduate, postgraduate and Ph.D. students of civil engineering, research scholars, practicing engineers, teachers and academicians. The analyses are based on the latest information available. A number of illustrated examples have been included in the text. SI units have been used in the book.
Download or read book Computational Mechanics 95 written by S.N. Atluri and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 3181 pages. Available in PDF, EPUB and Kindle. Book excerpt: AI!, in the earlier conferences (Tokyo, 1986; Atlanta, 1988, Melbourne, 1991; and Hong Kong, 1992) the response to the call for presentations at ICES-95 in Hawaii has been overwhelming. A very careful screening of the extended abstracts resulted in about 500 paper being accepted for presentation. Out of these, written versions of about 480 papers reached the conference secretariat in Atlanta in time for inclusion in these proceedings. The topics covered at ICES-95 range over the broadest spectrum of computational engineering science. The editors thank the international scientific committee, for their advice and encouragement in making ICES-95 a successful scientific event. Special thanks are expressed to the International Association for Boundary Elements Methods for hosting IABEM-95 in conjunction with ICES-95. The editors here express their deepest gratitude to Ms. Stacy Morgan for her careful handling of a myriad of details of ICES-95, often times under severe time constraints. The editors hope that the readers of this proceedings will find a kaleidoscopic view of computational engineering in the year 1995, as practiced in various parts of the world. Satya N. Atluri Atlanta, Georgia, USA Genki Yagawa Tokyo,Japan Thomas A. Cruse Nashville, TN, USA Organizing Committee Professor Genki Yagawa, University of Tokyo, Japan, Chair Professor Satya Atluri, Georgia Institute of Technology, U.S.A.
Download or read book Dynamic Behavior of Materials Volume 1 written by Dan Casem and published by Springer. This book was released on 2016-10-14 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the first volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Quantitative Visualization Fracture & Fragmentation Dynamic Behavior of Low Impedance Materials Shock & Blast Dynamic Behavior of Composites Novel Testing Techniques Hybrid Experimental & Computational Methods Dynamic Behavior of Geo-materials General Material Behavior
Download or read book Numerical Methods in Geomechanics Volume 1 written by G. Swoboda and published by Routledge. This book was released on 2017-11-01 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Routledge is an imprint of Taylor & Francis, an Informa company.
Download or read book Nonlinear Continuum Mechanics and Large Inelastic Deformations written by Yuriy I. Dimitrienko and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a rigorous axiomatic approach to continuum mechanics under large deformation. In addition to the classical nonlinear continuum mechanics – kinematics, fundamental laws, the theory of functions having jump discontinuities across singular surfaces, etc. - the book presents the theory of co-rotational derivatives, dynamic deformation compatibility equations, and the principles of material indifference and symmetry, all in systematized form. The focus of the book is a new approach to the formulation of the constitutive equations for elastic and inelastic continua under large deformation. This new approach is based on using energetic and quasi-energetic couples of stress and deformation tensors. This approach leads to a unified treatment of large, anisotropic elastic, viscoelastic, and plastic deformations. The author analyses classical problems, including some involving nonlinear wave propagation, using different models for continua under large deformation, and shows how different models lead to different results. The analysis is accompanied by experimental data and detailed numerical results for rubber, the ground, alloys, etc. The book will be an invaluable text for graduate students and researchers in solid mechanics, mechanical engineering, applied mathematics, physics and crystallography, as also for scientists developing advanced materials.
Download or read book Wave Processes in Classical and New Solids written by Pasquale Giovine and published by BoD – Books on Demand. This book was released on 2012-10-24 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wave propagation in solids has been widely studied and principal advances in this field have been achieved not only for the improvements of calculus methods, but also for the high progresses attained in the description of new types of materials. This book presents innovative and original research studies describing some enhancement in both directions. In particular, the first section is devoted to the propagation of waves in complex materials and related dispersion relations are deeply investigated. Instead the second section is dedicated to new applications for the study of wave processes in classical solids; the emphasis is posed on various simulation availabilities in the fields of seismology, damaging, geomaterials and multi-wave propagation. The audience includes students, engineers and advanced scientists with knowledge of wave propagation in solids.
Download or read book Thermomechanics of Continua written by Krzysztof Wilmanski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The notion of continuum thermodynamics, adopted in this book, is primarily understood as a strategy for development of continuous models of various physical systems. The examples of such a strategy presented in the book have both the classical character (e. g. thermoelastic materials, viscous fluids, mixtures) and the extended one (ideal gases, Maxwellian fluids, thermoviscoelastic solids etc. ). The latter has been limited intentionally to non-relativistic models; many important relativistic applications of the true extended thermodynamics will not be considered but can be found in the other sources. The notion of extended thermodynamics is also adopted in a less strict sense than suggested by the founders. For instance, in some cases we allow the constitutive dependence not only on the fields themselves but also on some derivatives. In this way, the new thermodynamical models may have some features of the usual nonequilibrium models and some of those of the extended models. This deviation from the strategy of extended thermodynamics is motivated by practical aspects; frequently the technical considerations of extended thermodynamics are so involved that one can no longer see important physical properties of the systems. This book has a different form from that usually found in books on continuum mechanics and continuum thermodynamics. The presentation of the formal structure of continuum thermodynamics is not always as rigorous as a mathematician might anticipate and the choice of physical subjects is too disperse to make a physicist happy.
Download or read book An Introduction to Continuum Mechanics written by J. N. Reddy and published by Cambridge University Press. This book was released on 2013-07-29 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This best-selling textbook presents the concepts of continuum mechanics, and the second edition includes additional explanations, examples and exercises.
