Download or read book Ion Beam Modification of Materials written by J.S. Williams and published by Newnes. This book was released on 2012-12-02 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference consisted of 15 oral sessions, including three plenary papers covering areas of general interest, 22 specialist invited papers and 51 contributed presentations as well as three poster sessions. There were several scientific highlights covering a diverse spectrum of materials and ion beam processing methods. These included a wide range of conventional and novel applications such as: optical displays and opto-electronics, motor vehicle and tooling parts, coatings tailored for desired properties, studies of fundamental defect properties, the production of novel (often buried) compounds, and treating biomedical materials. The study of nanocrystals produced by ion implantation in a range of host matrices, particularly for opto-electronics applications, was one especially new and exciting development. Despite several decades of study, major progress was reported at the conference in understanding defect evolution in semiconductors and the role of defects in transient impurity diffusion. The use of implantation to tune or isolate optical devices and in forming optically active centres and waveguides in semiconductors, polymers and oxide ceramics was a major focus of several presentations at the conference. The formation of hard coatings by ion assisted deposition or direct implantation was also an area which showed much recent progress. Ion beam techniques had also developed apace, particularly those based on plasma immersion ion implantation or alternative techniques for large area surface treatment. Finally, the use of ion beams for the direct treatment of cancerous tissue was a particularly novel and interesting application of ion beams.
Download or read book Laser and Ion Beam Modification of Materials written by I. Yamada and published by Elsevier. This book was released on 2013-10-22 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser and Ion Beam Modification of Materials is a compilation of materials from the proceedings of the symposium U: Material Synthesis and Modification by Ion beams and Laser Beams. This collection discusses the founding of the KANSAI Science City in Japan, and the structures, equipment, and research projects of two institutions are discussed pertaining to eV-MeV ion beams. A description of ion beams as used in materials research and in manufacturing processes, along with trends in ion implantation technology in semiconductors, is discussed. Research into ion beams by China and its industrial uses in non-semiconductor area is noted. For industrial applications, developing technology in terms of high speed, large surface modifications and use of high doses is important. Thus, the development of different ion beam approaches is examined. Industrial applications of ion and laser processing are discussed as cluster beams are used in solid state physics and chemistry. Mention is made on a high power discharge pumped solid state physics (ArF) excimer laser as a potential light source for better material processing. Under ion beam material processing is nanofabrication using focused ion beams, important for research work in mesoscopic systems. Progress in the use of ion-beam mixing using kinetic energy of ion-beams to mingle with pre-deposited surface layers of substrate materials has shown promise. Advanced materials researchers and scientists, as well as academicians in the field of nuclear physics, will find this collection helpful.
Download or read book Future Energy Conferences and Symposia written by and published by . This book was released on 1989 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book Ion Implantation for Materials Processing written by F. A. Smidt and published by William Andrew. This book was released on 1983 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book ONR Far East Scientific Bulletin written by and published by . This book was released on 1987 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific Bulletin written by and published by . This book was released on 1987 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ion Beam Modification of Solids written by Werner Wesch and published by Springer. This book was released on 2016-07-14 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the method of ion beam modification of solids in realization, theory and applications in a comprehensive way. It provides a review of the physical basics of ion-solid interaction and on ion-beam induced structural modifications of solids. Ion beams are widely used to modify the physical properties of materials. A complete theory of ion stopping in matter and the calculation of the energy loss due to nuclear and electronic interactions are presented including the effect of ion channeling. To explain structural modifications due to high electronic excitations, different concepts are presented with special emphasis on the thermal spike model. Furthermore, general concepts of damage evolution as a function of ion mass, ion fluence, ion flux and temperature are described in detail and their limits and applicability are discussed. The effect of nuclear and electronic energy loss on structural modifications of solids such as damage formation, phase transitions and amorphization is reviewed for insulators and semiconductors. Finally some selected applications of ion beams are given.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Forward Recoil Spectrometry written by Y. Serruys and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The practical properties of many materials are dominated by surface and near-surface composition and structure. An understanding of how the surface region affects material properties starts with an understanding of the elemental composition of that region. Since the most common contaminants are light elements (for example, oxygen, nitrogen, carbon, and hydrogen), there is a clear need for an analytic probe that simultaneously and quantitatively records elemental profiles of all light elements. Energy recoil detection using high-energy heavy ions is unique in its ability to provide quantitative profiles of light and medium mass elements. As such this method holds great promise for the study of a variety of problems in a wide range of fields. While energy recoil detection is one of the newest and most promising ion beam analytic techniques, it is also the oldest in terms of when it was first described. Before discussing recent developments in this field, perhaps it is worth reviewing the early days of this century when the first energy recoil detection experiments were reported.
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1983 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Transmission Electron Microscopy 1 written by Xiao-Feng Zhang and published by Springer Science & Business Media. This book was released on 2001-10-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transmission electron microscopy (TEM) is now recognized as a crucial tool in materials science. This book, authored by a team of expert Chinese and international authors, covers many aspects of modern electron microscopy, from the architecture of novel electron microscopes, advanced theories and techniques in TEM and sample preparation, to a variety of hands-on examples of TEM applications. Volume I concentrates on the newly developed concepts and methods which are making TEM a powerful and indispensible tool in materials science.
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Treatise on Heavy Ion Science written by D.A. Bromley and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: For 75 years the stopping of energetic ions in matter has been a subject of great theoretical and experimental interest. The theoretical treatment of the stopping of ions in matter is largely due to the work of Bohr, 1-3 Bethe,4-6 Bloch,7. s and Lindhard,9-12 and it has been reviewed by Bohr,3 Fano,13 17 20 Jackson,14 Sigmund,15 Ahlen,16 and Ziegler et al. - Soon after the discovery of energetic particle emission from radioactive materials, there was interest in how these corpuscles were slowed down in traversing matter. In 1900, Marie Curie stated 21 the hypothesis that Hies rayons alpha sont des projectiles materiels susceptibles de perdre de leur vitesse en travers ant la matiere." Early attempts to evaluate this were incon clusive for there was not yet an accurate proposed model of the atom. Enough experimental evidence was collected in the next decade to make stopping power theory one of the central concerns of those attempting to develop an atomic model. J.J. Thomson, director of the prestigious Cavendish Laboratory, and Niels Bohr, a fresh postdoctoral scientist at Rutherford's Manchester Laboratory, both published almost simultaneously22. 23 an analysis of the stopping of charged particles by matter, and each contained many of their divergent ideas on the model of an atom. Thomson ignored in his paper the Rutherford alpha-particle scattering 24 experiment of a year before. But the nuclear atom with a heavy positively 25 charged core was the basis of Bohr's ideas.
Download or read book Surface Modification of Metals by Ion Beams 6 written by and published by . This book was released on 1989 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Beam solid Interactions and Transient Thermal Processing written by John C. C. Fan and published by North Holland. This book was released on 1984 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
