Download or read book Concurrent Hardware written by Michael Kishinevsky and published by Wiley. This book was released on 1993-12-08 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the theory and design of self-timed systems. The logical design of self-timed circuits (STCs) provides a focal point for, on the one hand, those interested in formal models of parallel computation and, on the other, hardware designers. The approach taken by the authors is to address general issues concerning the very nature of concurrency, as well as to demonstrate the particular features of asynchronous design. The book presents formal models of the specification and verification of parallel processes and describes methods for self-timed circuit synthesis and analysis. It is augmented by a demonstration-version of a CAD system called FORCAGE which consists of subsystems of behavior verification, self-timed circuit analysis and synthesis. The system can be run on a PC.
Download or read book Low Power Hardware Synthesis from Concurrent Action Oriented Specifications written by Gaurav Singh and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human lives are getting increasingly entangled with technology, especially comp- ing and electronics. At each step we take, especially in a developing world, we are dependent on various gadgets such as cell phones, handheld PDAs, netbooks, me- cal prosthetic devices, and medical measurement devices (e.g., blood pressure m- itors, glucometers). Two important design constraints for such consumer electronics are their form factor and battery life. This translates to the requirements of reduction in the die area and reduced power consumption for the semiconductor chips that go inside these gadgets. Performance is also important, as increasingly sophisticated applications run on these devices, and many of them require fast response time. The form factor of such electronics goods depends not only on the overall area of the chips inside them but also on the packaging, which depends on thermal ch- acteristics. Thermal characteristics in turn depend on peak power signature of the chips. As a result, while the overall energy usage reduction increases battery life, peak power reduction in?uences the form factor. One more important aspect of these electronic equipments is that every 6 months or so, a newer feature needs to be added to keep ahead of the market competition, and hence new designs have to be completed with these new features, better form factor, battery life, and performance every few months. This extreme pressure on the time to market is another force that drives the innovations in design automation of semiconductor chips.
Download or read book Concurrent Programming on Windows written by Joe Duffy and published by Pearson Education. This book was released on 2008-10-28 with total page 1421 pages. Available in PDF, EPUB and Kindle. Book excerpt: “When you begin using multi-threading throughout an application, the importance of clean architecture and design is critical. . . . This places an emphasis on understanding not only the platform’s capabilities but also emerging best practices. Joe does a great job interspersing best practices alongside theory throughout his book.” – From the Foreword by Craig Mundie, Chief Research and Strategy Officer, Microsoft Corporation Author Joe Duffy has risen to the challenge of explaining how to write software that takes full advantage of concurrency and hardware parallelism. In Concurrent Programming on Windows, he explains how to design, implement, and maintain large-scale concurrent programs, primarily using C# and C++ for Windows. Duffy aims to give application, system, and library developers the tools and techniques needed to write efficient, safe code for multicore processors. This is important not only for the kinds of problems where concurrency is inherent and easily exploitable—such as server applications, compute-intensive image manipulation, financial analysis, simulations, and AI algorithms—but also for problems that can be speeded up using parallelism but require more effort—such as math libraries, sort routines, report generation, XML manipulation, and stream processing algorithms. Concurrent Programming on Windows has four major sections: The first introduces concurrency at a high level, followed by a section that focuses on the fundamental platform features, inner workings, and API details. Next, there is a section that describes common patterns, best practices, algorithms, and data structures that emerge while writing concurrent software. The final section covers many of the common system-wide architectural and process concerns of concurrent programming. This is the only book you’ll need in order to learn the best practices and common patterns for programming with concurrency on Windows and .NET.
Download or read book Concurrent Hardware written by Mikhail Aleksandrovich Kišinevskij and published by . This book was released on 1994 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concurrent Computations written by Stuart K. Tewksbury and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1987 Princeton Workshop on Algorithm, Architecture and Technology Issues for Models of Concurrent Computation was organized as an interdisciplinary work shop emphasizing current research directions toward concurrent computing systems. With participants from several different fields of specialization, the workshop cov ered a wide variety of topics, though by no means a complete cross section of issues in this rapidly moving field. The papers included in this book were prepared for the workshop and, taken together, provide a view of the broad range of issues and alternative directions being explored. To organize the various papers, the book has been divided into five parts. Part I considers new technology directions. Part II emphasizes underlying theoretical issues. Communication issues, which are ad dressed in the majority of papers, are specifically highlighted in Part III. Part IV includes papers stressing the fault tolerance and reliability of systems. Finally, Part V includes systems-oriented papers, where the system ranges from VLSI circuits through powerful parallel computers. Much of the initial planning of the workshop was completed through an informal AT&T Bell Laboratories group consisting of Mehdi Hatamian, Vijay Kumar, Adri aan Ligtenberg, Sailesh Rao, P. Subrahmanyam and myself. We are grateful to Stuart Schwartz, both for the support of Princeton University and for his orga nizing local arrangements for the workshop, and to the members of the organizing committee, whose recommendations for participants and discussion topics were par ticularly helpful. A. Rosenberg, and A. T.
Download or read book Architectures Languages and Techniques for Concurrent Systems written by World Occam and Transputer User Group. Technical Meeting and published by IOS Press. This book was released on 1999 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past fifteen years concurrency in programming languages such as Java rose and fell, and again became popular. At this moment developers advise us to avoid concurrency in programming. They are using a host of deprecated methods in the latest releases How are we to understand the love-hate relationship with what should be a widely used approach of tackling real-world problems? The aim of rchitectures, Languages and Techniques is to encourage the safe, efficient and effective use of parallel computing. It is generally agreed that concurrency is found in most real applications and that it should be natural to use concurrency in programming. However, there has grown up a myth that concurrency is "hard" and only for the hardened expert. The papers collected in this book cover the whole spectrum of concurrency, from theoretical underpinnings to applications. The message passing style of concurrency, developed in the Communicating Sequential Processes (CSP) approach, is considered, and extensions are proposed. CSP's realization in the programming language occam is used directly for applications as diverse as modeling of concurrent systems and the description of concurrent hardware. This latter application may be compared to the use of Java for the same purpose. Concurrency and the use of Java is the subject of further papers, as is the provision of CSP-like facilities in Java and C and techniques to use these languages to construct reliable concurrent systems. At a time when concurrency gives headaches, this book brings a welcome breath of fresh air. Concurrency can really be a positive way forward.
Download or read book The Concurrent C Programming Language written by Narain Gehani and published by Silicon Press. This book was released on 1989 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concurrent C is a superset of C that provides parallel programming facilities such as those for the declaring and creating processes, for process synchronization and interaction, and for process termination and abortion. Concurrent C was designed for the effective utilization of multiprocessors and multicomputers. Concurrent C, as a compile-time option, also works with C++, an object-oriented superset of C.
Download or read book Software Design Methods for Concurrent and Real time Systems written by Hassan Gomaa and published by Addison-Wesley Professional. This book was released on 1993 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the concepts and methods used in the software design of real-time systems. The author outlines the characteristics of real-time systems, describes the role of software design in real-time system development, surveys and compares some software design methods for real-time systems, and outlines techniques for the verification and validation of real-time system designs.
Download or read book Multi Agent Systems for Concurrent Intelligent Design and Manufacturing written by Weiming Shen and published by CRC Press. This book was released on 2019-09-17 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agent Technology, or Agent-Based Approaches, is a new paradigm for developing software applications. It has been hailed as 'the next significant breakthrough in software development', and 'the new revolution in software' after object technology or object-oriented programming. In this context, an agent is a computer system which is capable of act
Download or read book Concurrent Engineering Tools and Technologies for Mechanical System Design written by Edward J. Haug and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain lectures presented at the NATO Advanced Study Institute on Concurrent Engineering Tools and Technologies for Mechanical System Design held in Iowa City, Iowa, 25 May -5 June, 1992. Lectures were presented by leaders from Europe and North America in disciplines contributing to the emerging international focus on Concurrent Engineering of mechanical systems. Participants in the Institute were specialists from throughout NATO in disciplines constituting Concurrent Engineering, many of whom presented contributed papers during the Institute and all of whom participated actively in discussions on technical aspects of the subject. The proceedings are organized into the following five parts: Part 1 Basic Concepts and Methods Part 2 Application Sectors Part 3 Manufacturing Part 4 Design Sensitivity Analysis and Optimization Part 5 Virtual Prototyping and Human Factors Each of the parts is comprised of papers that present state-of-the-art concepts and methods in fields contributing to Concurrent Engineering of mechanical systems. The lead-off papers in each part are based on invited lectures, followed by papers based on contributed presentations made by participants in the Institute.
Download or read book Start Concurrent written by Barry Wittman and published by Purdue University Press. This book was released on 2013-12-31 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multicore microprocessors are now at the heart of nearly all desktop and laptop computers. While these chips offer exciting opportunities for the creation of newer and faster applications, they also challenge students and educators. How can the new generation of computer scientists growing up with multicore chips learn to program applications that exploit this latent processing power? This unique book is an attempt to introduce concurrent programming to first-year computer science students, much earlier than most competing products. This book assumes no programming background but offers a broad coverage of Java. It includes over 150 numbered and numerous inline examples as well as more than 300 exercises categorized as "conceptual," "programming," and "experiments." The problem-oriented approach presents a problem, explains supporting concepts, outlines necessary syntax, and finally provides its solution. All programs in the book are available for download and experimentation. A substantial index of at least 5000 entries makes it easy for readers to locate relevant information. In a fast-changing field, this book is continually updated and refined. The 2014 version is the seventh "draft edition" of this volume, and features numerous revisions based on student feedback. A list of errata for this version can be found on the Purdue University Department of Computer Science website.
Download or read book Concurrent Patterns and Best Practices written by Atul S. Khot and published by Packt Publishing Ltd. This book was released on 2018-09-27 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: A definitive guide to mastering and implementing concurrency patterns in your applications Key FeaturesBuild scalable apps with patterns in multithreading, synchronization, and functional programmingExplore the parallel programming and multithreading techniques to make the code run fasterEfficiently use the techniques outlined to build reliable applicationsBook Description Selecting the correct concurrency architecture has a significant impact on the design and performance of your applications. This book explains how to leverage the different characteristics of parallel architecture to make your code faster and more efficient. To start with, you'll understand the basic concurrency concepts and explore patterns around explicit locking, lock free programming, futures & actors. Then, you'll get insights into different concurrency models and parallel algorithms and put them to practice in different scenarios to realize your application's true potential. We'll take you through multithreading design patterns, such as master, slave, leader, follower, map-reduce, and monitor, also helping you to learn hands-on coding using these patterns. Once you've grasped all of this, you'll move on to solving problems using synchronizer patterns. You'll discover the rationale for these patterns in distributed & parallel applications, followed by studying how future composition, immutability and the monadic flow help create more robust code. Toward the end of the book, you'll learn about the actor paradigm and actor patterns - the message passing concurrency paradigm. What you will learnExplore parallel architecture Get acquainted with concurrency models Internalize design themes by implementing multithreading patterns Get insights into concurrent design patterns Discover design principles behind many java threading abstractions Work with functional concurrency patternsWho this book is for This is a must-have guide for developers who want to learn patterns to build scalable and high-performing apps. It’s assumed that you already have a decent level of programming knowledge.
Download or read book Concurrent Engineering written by Andrew Kusiak and published by John Wiley & Sons. This book was released on 1993-01-12 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a top-down approach to the design, development, testing and recyclability of products, components and systems across a wide range of industries. Starting with the desired result and working back through the details, it shows how to produce goods, taking into account the challenges of actual manufacture, what the reliability requirements should be, quality control, associated costs, customer needs and more. Additional features include case studies and team negotiating. Also well-illustrated with figures, photographs, charts and tables and includes an extensive bibliography.
Download or read book Concurrent and Real Time Programming in Ada written by Alan Burns and published by Cambridge University Press. This book was released on 2007-07-05 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ada is the only ISO-standard, object-oriented, concurrent, real-time programming language. It is intended for use in large, long-lived applications where reliability and efficiency are essential, particularly real-time and embedded systems. In this book, Alan Burns and Andy Wellings give a thorough, self-contained account of how the Ada tasking model can be used to construct a wide range of concurrent and real-time systems. This is the only book that focuses on an in-depth discussion of the Ada tasking model. Following on from the authors' earlier title Concurrency in Ada, this book brings the discussion up to date to include the new Ada 2005 language and the recent advances in real-time programming techniques. It will be of value to software professionals and advanced students of programming alike: indeed every Ada programmer will find it essential reading and a primary reference work that will sit alongside the language reference manual.
Download or read book Concurrent Objects and Beyond written by Gul Agha and published by Springer. This book was released on 2014-09-09 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift volume includes a collection of papers written in honor of the accomplishments of Professor Yonezawa on the occasion of his 65th birthday in 2012. With a few exceptions, the papers in this Festschrift were presented at an international symposium celebrating this occasion. Also included are reprints of two of Professor Yonezawa's most influential papers on the programming language ABCL. The volume is a testament strong and lasting impact Professor Yonezawa's research accomplishments as well as the inspiration he has been to colleagues and students alike.
Download or read book Novel Algorithms and Techniques in Telecommunications Automation and Industrial Electronics written by Tarek Sobh and published by Springer Science & Business Media. This book was released on 2008-08-15 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Algorithms and Techniques in Telecommunications, Automation and Industrial Electronics includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of Industrial Electronics, Technology and Automation, Telecommunications and Networking. Novel Algorithms and Techniques in Telecommunications, Automation and Industrial Electronics includes selected papers form the conference proceedings of the International Conference on Industrial Electronics, Technology and Automation (IETA 2007) and International Conference on Telecommunications and Networking (TeNe 07) which were part of the International Joint Conferences on Computer, Information and Systems Sciences and Engineering (CISSE 2007).
Download or read book A Survey of High Level Synthesis Systems written by Robert A. Walker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: After long years of work that have seen little industrial application, high-level synthesis is finally on the verge of becoming a practical tool. The state of high-level synthesis today is similar to the state of logic synthesis ten years ago. At present, logic-synthesis tools are widely used in digital system design. In the future, high-level synthesis will play a key role in mastering design complexity and in truly exploiting the potential of ASIes and PLDs, which demand extremely short design cycles. Work on high-level synthesis began over twenty years ago. Since substantial progress has been made in understanding the basic then, problems involved, although no single universally-accepted theoretical framework has yet emerged. There is a growing number of publications devoted to high-level synthesis, specialized workshops are held regularly, and tutorials on the topic are commonly held at major conferences. This book gives an extensive survey of the research and development in high-level synthesis. In Part I, a short tutorial explains the basic concepts used in high-level synthesis, and follows an example design throughout the synthesis process. In Part II, current high-level synthesis systems are surveyed.
