Download or read book Corrosion of Steel in Concrete written by Luca Bertolini and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel-reinforced concrete is used ubiquitously as a building material due to its unique combination of the high compressive strength of concrete and the high tensile strength of steel. Therefore, reinforced concrete is an ideal composite material that is used for a wide range of applications in structural engineering such as buildings, bridges, tunnels, harbor quays, foundations, tanks and pipes. To ensure durability of these structures, however, measures must be taken to prevent, diagnose and, if necessary, repair damage to the material especially due to corrosion of the steel reinforcement. The book examines the different aspects of corrosion of steel in concrete, starting from basic and essential mechanisms of the phenomenon, moving up to practical consequences for designers, contractors and owners both for new and existing reinforced and prestressed concrete structures. It covers general aspects of corrosion and protection of reinforcement, forms of attack in the presence of carbonation and chlorides, problems of hydrogen embrittlement as well as techniques of diagnosis, monitoring and repair. This second edition updates the contents with recent findings on the different topics considered and bibliographic references, with particular attention to recent European standards. This book is a self-contained treatment for civil and construction engineers, material scientists, advanced students and architects concerned with the design and maintenance of reinforced concrete structures. Readers will benefit from the knowledge, tools, and methods needed to understand corrosion in reinforced concrete and how to prevent it or keep it within acceptable limits.
Download or read book Corrosion in Reinforced Concrete Structures written by H Böhni and published by Elsevier. This book was released on 2005-01-20 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete has the potential to be very durable and capable of withstanding a variety of adverse environmental conditions. However, failures in the structures do still occur as a result of premature reinforcement corrosion. In this authoritative book the fundamental aspects of this complex process are analysed; focusing on corrosion of the reinforcing steel, and looking particularly, at new scientific and technological developments.Monitoring techniques, including the newly developed online-monitoring, are examined, as well as the numerical methods used to simulate corrosion and perform parameter studies. The influence of composition and microstructure of concrete on corrosion behaviour is explored. The second half of the book, which deals with corrosion prevention methods, starts with a discussion on stainless steels as reinforcement materials. There are comprehensive reviews of the use of surface treatments and coatings, of the application of corrosion inhibitors and of the application of electrochemical techniques. In each case the necessary scientific fundamentals are explained and practical instances of use are looked at. This is an invaluable guide for engineers, materials scientists and researchers in the field of structural concrete. - Fundamental aspects of corrosion in concrete are analysed in detail - Explores how to minimise the effects of corrosion in concrete - Invaluable guide for engineers, materials scientists and researchers in the field of structural concrete
Download or read book Corrosion of Steel in Concrete written by J.P. Broomfield and published by CRC Press. This book was released on 1996-12-12 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The corrosion of reinforcing steel in concrete is a major problem facing civil engineers and surveyors throughout the world today. There will always be a need to build stuctures in corrosive environments and it is therefore essential to address the problems that result. Corrosion of Steel in Concrete provides information on corrosion of steel in at
Download or read book Corrosion of Steel in Concrete Structures written by Amir Poursaee and published by Woodhead Publishing. This book was released on 2023-02-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading for researchers, practitioners, and engineers, this book covers not only all the important aspects in the field of corrosion of steel reinforced concrete but also discusses new topics and future trends. Theoretical concepts of corrosion of steel in concrete structures, the variety of reinforcing materials and concrete, including stainless steel and galvanized steel, measurements and evaluations, such as electrochemical techniques and acoustic emission, protection and maintenance methods, and modelling, latest developments, and future trends in the field are discussed. - Comprehensive coverage of the corrosion of steel bars in concrete, investigating the range of reinforcing materials, and types of concrete - Introduces the latest measuring methods, data collection, and advanced modeling techniques - Second edition covers a range of new, emerging topics such as the concept of chloride threshold value, concrete permeability and chloride diffusion, the role of steel microstructure, and innovations in corrosion detection devices
Download or read book Steel Corrosion Induced Concrete Cracking written by Yuxi Zhao and published by Butterworth-Heinemann. This book was released on 2016-03-08 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel Corrosion Induced Concrete Cracking presents the latest advances in the origin, mechanism and development of corrosion-induced cracking in concrete. It investigates topics including expansion coefficient and elastic modulus of steel corrosion, rust layer and rust distribution, spatial distribution of corrosion products, the shape of corrosion-induced cracks and so on. This book concludes by proposing an improved corrosion-induced cracking model, which considers the phenomena of the simultaneous occurrence of corrosion layer accumulation and corrosion filling in concrete. This book will be a valuable reference book for researchers and graduate students in the field of concrete durability and concrete structure, and industry engineers who are concerned with the deterioration mechanisms and the life cycle of reinforced concrete structures. - Proposes a new corrosion-induced concrete cracking model, which takes into account the phenomenon of the simultaneous occurrence of corrosion layer accumulation and corrosion filling paste. - Investigates the parameters and values of expansion coefficients and elastic modulus of steel corrosion, which enables a more rational prediction of concrete surface cracking - Introduces the use of the Gaussian function to describe the non-uniform spatial distribution of corrosion products.
Download or read book Steel Corrosion in Concrete written by Arnon Bentur and published by CRC Press. This book was released on 1997-10-09 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poor durability of concrete is a major cause of problems in modern building and civil engineering structures in all countries: the annual cost of investigating and repairing deteriorating reinforced concrete structures runs into many millions of pounds. This book explains the fundamentals of the corrosion of steel in concrete. It is comprehensive and provides a basis for the practising engineer to design concrete structures which avoid the problem using modern concepts and specifications. A limited discussion of corrosion measurement and repairs is also provided.
Download or read book Steel Reinforced Concrete Structures written by Mohamed Abdallah El-Reedy and published by CRC Press. This book was released on 2017-11-06 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the corrosion of reinforced concrete from a practical point of view, highlights protective design and repair procedures, and presents ongoing maintenance protocols. Updated throughout, this new edition adds additional information on concrete repair using Carbon Fiber Reinforced Polymers (CFRP), and reviews new examples of the effects of corrosion on both prestressed and reinforced concrete structures. It also examines economic analysis procedures and the probability of structural failures to define structural risk assessment, and covers precautions and recommendations for protecting reinforced concrete structures from corrosion based on the latest codes and specifications.
Download or read book Corrosion Tests and Standards written by Robert Baboian and published by ASTM International. This book was released on 2005 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chloride Induced Steel Corrosion in Concrete Under Service Loads written by Hailong Ye and published by Springer Nature. This book was released on 2020-03-27 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the latest advances in understanding chloride ingress and steel corrosion in concrete under service loads. Unlike the existing literature, it focuses specifically on the effect of service loads on chloride-induced durability issues in reinforced concrete structures. It discusses how service loads affect the moisture and chloride penetration rate, corrosion kinetics and rust distribution, as well as the structural performance of concrete components (e.g. beams and columns) in a systematic and hierarchical way. Given its scope, the book is chiefly intended for researchers and industry practitioners in structural engineering, particularly those whose work involves the durability design of concrete structures.
Download or read book Corrosion of Reinforcement in Concrete EFC 25 written by J. Mietz and published by CRC Press. This book was released on 2020-08-13 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the full papers presented in the successful session "Corrosion of Steel in Concrete" at EUROCORR '97. It highlights the areas of technical development in this field, including monitoring of steel reinforcement corrosion, prevention of corrosion and electrochemical repair methods.
Download or read book Significance of Tests and Properties of Concrete and Concrete making Materials written by Joseph F. Lamond and published by ASTM International. This book was released on 2006 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Inhibitors for Steel in Concrete written by Bernhard Elsener and published by CRC Press. This book was released on 2001 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of inhibitors for rehabilitation of reinforced concrete structures is a new field of application and this new volume provides a State of the Art Report on this subject. Corrosion of steel in concrete is one of the major problems for infrastructure such as bridges, tunnels, housing etc. since it leads to spalling of the concrete and loss in cross section of the steel that may cause structural and safety problems. The steel in concrete generally resists corrosion as a result of a passive layer that develops on the metal surface in the alkaline environment of the concrete. Corrosion can occur if these conditions are disturbed, for example, in the presence of chlorides or with carbonation of concrete. Traditional repair methods consist in removing the deteriorated concrete and replacing it but these can be laborious, noisy and very costly. To avoid these disadvantages new methods have been developed in recent years. These include electrochemical procedures and, increasingly, the use of inhibitors. The use of inhibitors for rehabilitation of reinforced concrete structures is a new field of application and this new volume provides a State of the Art Report on this subject.The report, under the editorship of Prof. Bernhard Elsener, was prepared by a Task Group of the EFC Working Party on Corrosion of Reinforcement in Concrete. In a literature review it describes inorganic and organic chemicals that have been proposed and examined as well as the commercial corrosion inhibitors that are available on the market. Protection mechanism and possible effects of inhibitors on concrete properties are described. Practical experience with inhibitors for steel in concrete and the long term effectiveness are considered. The various test methods for evaluating the behaviour of the inhibitors are described and critically assessed. In a rapidly evolving field this State of the Art Report, based mainly on independent not commercial literature, will be of value to corrosion engineers and civil engineers concerned with maintenance and repair of reinforced concrete structures.
Download or read book Concrete Durability written by Luis Emilio Rendon Diaz Miron and published by Springer. This book was released on 2017-04-27 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the newest developments in the creation of concrete using smart additives and supplementary cementitious materials as well as methods, technology and novel admixtures to monitor, evaluate and control steel corrosion in reinforced concrete. Industry experts and research specialists explain the structural, physical, and chemical properties of various types of concrete and its applications. They detail the characteristics preferred for manufacturing specific types of concrete. The book chapters also focus on the electrochemical state of the steel reinforcement in view of steel corrosion and corrosion control.
Download or read book Corrosion and Materials in the Oil and Gas Industries written by Reza Javaherdashti and published by CRC Press. This book was released on 2016-04-19 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way d
Download or read book Principles of Corrosion Engineering and Corrosion Control written by Zaki Ahmad and published by Elsevier. This book was released on 2006-09-18 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a huge issue for materials, mechanical, civil and petrochemical engineers. With comprehensive coverage of the principles of corrosion engineering, this book is a one-stop text and reference for students and practicing corrosion engineers. Highly illustrated, with worked examples and definitions, it covers basic corrosion principles, and more advanced information for postgraduate students and professionals. Basic principles of electrochemistry and chemical thermodynamics are incorporated to make the book accessible for students and engineers who do not have prior knowledge of this area. Each form of corrosion covered in the book has a definition, description, mechanism, examples and preventative methods. Case histories of failure are cited for each form. End of chapter questions are accompanied by an online solutions manual.* Comprehensively covers the principles of corrosion engineering, methods of corrosion protection and corrosion processes and control in selected engineering environments* Structured for corrosion science and engineering classes at senior undergraduate and graduate level, and is an ideal reference that readers will want to use in their professional work* Worked examples, extensive end of chapter exercises and accompanying online solutions and written by an expert from a key pretochemical university
Download or read book Uhlig s Corrosion Handbook written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 1299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a reference for engineers, scientists, and students concerned with the use of materials in applications where reliability and resistance to corrosion are important. It updates the coverage of its predecessor, including coverage of: corrosion rates of steel in major river systems and atmospheric corrosion rates, the corrosion behavior of materials such as weathering steels and newer stainless alloys, and the corrosion behavior and engineering approaches to corrosion control for nonmetallic materials. New chapters include: high-temperature oxidation of metals and alloys, nanomaterials, and dental materials, anodic protection. Also featured are chapters dealing with standards for corrosion testing, microbiological corrosion, and electrochemical noise.
Download or read book New Challenges and Industrial Applications for Corrosion Prevention and Control written by El Kacimi, Younes and published by IGI Global. This book was released on 2020-06-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals are used at an extremely high rate in the industrial and manufacturing fields. Exemplary properties including strength and ductility have made this material highly dynamic; however, the risk of corrosion remains a vital issue. The study of corrosion prevention has attracted interest from researchers and professionals as new technologies are emerging that can assist in the prevention of material destruction. However, research is lacking on the application of these protective technologies within specific fields. New Challenges and Industrial Applications for Corrosion Prevention and Control provides emerging research exploring the theoretical and practical aspects of protective methods against corrosion and the implementation of these techniques within a wide span of professional disciplines. Featuring coverage on a broad range of topics such as molecular modeling, surface treatments, and biomaterials, this book is ideally designed for engineers, industrial chemists, material scientists, researchers, engineers, academicians, practitioners, and students seeking current research on the technological advancements in corrosion protection in various professional scopes.
