Download or read book Computer Simulations of Surfaces and Interfaces written by Burkhard Dünweg and published by Springer Science & Business Media. This book was released on 2003-12-31 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Albena, Bulgaria, from 9 to 20 September 2002

Download or read book Surfaces and Interfaces Physics and Electronics written by R.S. Bauer and published by Elsevier. This book was released on 2012-12-02 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfaces and Interfaces: Physics and Electronics covers the proceedings of the second Trieste ICTP-IUPAP Semiconductor Symposium, conducted at the International Center for Theoretical Physics in Trieste, Italy on August 30 to September 3, 1982. The book focuses on the processes, methodologies, reactions, and approaches involved in semiconductor physics. The selection first elaborates on the electronic properties and surface geometry of GaAs and ZnO surfaces; electronic structure of Si (III) surfaces; and photoemission studies of surface states on Si (III) 2X1. Discussions focus on consistency of different experiments, relating experiments to a theoretical model, quenching of surface states by hydrogen, inverse photoemission results, and basic data and models of the low-index ZnO surfaces. The text then examines Si (III) 2X1 studies by angle resolved photoemission; electronic surface states at steps in Si (III) 2X1; and a novel method for the study of optical properties of surfaces. The manuscript takes a look at spot profile analysis (LEED) of defects at silicon surfaces; chemisorption-induced defects at interfaces on compound semiconductors; and surface defects on semiconductors. The microscopic properties and behavior of silicide interfaces, recombination at semiconductor surfaces and interfaces, and dipoles, defects, and interfaces are also discussed. The selection is a highly recommended source of data for physicists and readers wanting to study semiconductor physics.

Download or read book Liquid Surfaces and Interfaces written by Peter S. Pershan and published by Cambridge University Press. This book was released on 2012-08-02 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The availability of synchrotron x-ray sources and the subsequent developments described in this book have led to substantial progress in our understanding of molecular ordering at liquid interfaces. This practical guide enables graduate students and researchers working in physics, chemistry, biology and materials science to understand and carry out experimental investigations into the basic physical and chemical properties of liquid surfaces and interfaces. The book examines the surfaces of bulk liquids, thin wetting films and buried liquid-liquid interfaces. It discusses experiments on simple and complex fluids, including pure water and organic liquids, liquid crystals, liquid metals, electrified liquid-liquid interfaces and interfacial monolayers of amphiphiles, nanoparticles, polymers and biomolecules. A detailed description of the apparatus and techniques required for these experiments is provided, and theoretical approaches to data analysis are described, including approximate methods such as the Master formula, the Born approximation, Parratt's algorithm and the Distorted Wave Approximation.

Download or read book Physics of Surfaces and Interfaces written by Harald Ibach and published by Springer Science & Business Media. This book was released on 2006-11-18 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. It is designed as a handbook for the researcher as well as a study-text for graduate students. Written explanations are supported by 350 graphs and illustrations.

Download or read book Handbook of Surfaces and Interfaces of Materials Five Volume Set written by Hari Singh Nalwa and published by Elsevier. This book was released on 2001-10-26 with total page 1915 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together, under a single cover, all aspects of the chemistry, physics, and engineering of surfaces and interfaces of materials currently studied in academic and industrial research. It covers different experimental and theoretical aspects of surfaces and interfaces, their physical properties, and spectroscopic techniques that have been applied to a wide class of inorganic, organic, polymer, and biological materials. The diversified technological areas of surface science reflect the explosion of scientific information on surfaces and interfaces of materials and their spectroscopic characterization. The large volume of experimental data on chemistry, physics, and engineering aspects of materials surfaces and interfaces remains scattered in so many different periodicals, therefore this handbook compilation is needed.The information presented in this multivolume reference draws on two decades of pioneering research on the surfaces and interfaces of materials to offer a complete perspective on the topic. These five volumes-Surface and Interface Phenomena; Surface Characterization and Properties; Nanostructures, Micelles, and Colloids; Thin Films and Layers; Biointerfaces and Applications-provide multidisciplinary review chapters and summarize the current status of the field covering important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniques with contributions from internationally recognized experts from all over the world. Fully cross-referenced, this book has clear, precise, and wide appeal as an essential reference source long due for the scientific community. The complete reference on the topic of surfaces and interfaces of materialsThe information presented in this multivolume reference draws on two decades of pioneering researchProvides multidisciplinary review chapters and summarizes the current status of the fieldCovers important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniquesContributions from internationally recognized experts from all over the world

Download or read book Computer Simulation Studies in Condensed Matter Physics X written by David P. Landau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Simulation Studies in Condensed-Matter Physics X is devoted to Prof. Masuo Suzuki's ideas, which have made novel, new simulations possible. These proceedings, of the 1997 workshop, comprise three parts that deal with new algorithms, methods of analysis, and conceptual developments. The first part contains invited papers that deal with simulational studies of classical systems. The second of the proceedings is devoted to invited papers on quantum systems, including new results for strongly correlated electron and quantum spin models. The final part contains a large number of contributed presentations.

Download or read book Computer Simulations of Surfaces and Interfaces written by Burkhard Dünweg and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of surfaces and interactions between dissimilar materials or phases are vital for modern technological applications. Computer simulation methods are indispensable in such studies and this book contains a substantial body of knowledge about simulation methods as well as the theoretical background for performing computer experiments and analyzing the data. The book is self-contained, covering a range of topics from classical statistical mechanics to a variety of simulation techniques, including molecular dynamics, Langevin dynamics and Monte Carlo methods. A number of physical systems are considered, including fluids, magnets, polymers, granular media, and driven diffusive systems. The computer simulation methods considered include both standard and accelerated versions. The simulation methods are clearly related to the fundamental principles of thermodynamics and statistical mechanics.

Download or read book Computer Simulation of Polymeric Materials written by Japan Association for Chemical Innovation and published by Springer. This book was released on 2016-07-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to introduce a mesoscale polymer simulation system called OCTA. With its name derived from "Open Computational Tool for Advanced material technology," OCTA is a unique software product, available without charge, that was developed in a project funded by Japanese government. OCTA contains a series of simulation programs focused on mesoscale simulation of the soft matter COGNAC, SUSHI, PASTA, NAPLES, MUFFIN, and KAPSEL. When mesoscale polymer simulation is performed, one may encounter many difficulties that this book will help to overcome. The book not only introduces the theoretical background and functions of each simulation engine, it also provides many examples of the practical applications of the OCTA system. Those examples include predicting mechanical properties of plastic and rubber, morphology formation of polymer blends and composites, the micelle structure of surfactants, and optical properties of polymer films. This volume is strongly recommended as a valuable resource for both academic and industrial researchers who work in polymer simulation.

Download or read book Computer Simulation of Dynamic Phenomena written by Mark L. Wilkins and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of computer programs for simulating phenomena in hydrodynamics, gas dynamics, and elastic plastic flow in one, two, and three dimensions. The text covers Maxwell's equations, and thermal and radiation diffusion, while the numerical procedures described permit the exact conservation of physical properties in the solutions of the fundamental laws of mechanics. The author also treats materials, including the use of simulation programs to predict material behavior.

Download or read book Atomistic Computer Simulations written by Veronika Brázdová and published by John Wiley & Sons. This book was released on 2013-04-16 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many books explain the theory of atomistic computer simulations; this book teaches you how to run them This introductory "how to" title enables readers to understand, plan, run, and analyze their own independent atomistic simulations, and decide which method to use and which questions to ask in their research project. It is written in a clear and precise language, focusing on a thorough understanding of the concepts behind the equations and how these are used in the simulations. As a result, readers will learn how to design the computational model and which parameters of the simulations are essential, as well as being able to assess whether the results are correct, find and correct errors, and extract the relevant information from the results. Finally, they will know which information needs to be included in their publications. This book includes checklists for planning projects, analyzing output files, and for troubleshooting, as well as pseudo keywords and case studies. The authors provide an accompanying blog for the book with worked examples, and additional material and references: http://www.atomisticsimulations.org/.

Download or read book Computer Simulation of Ion Solid Interactions written by Wolfgang Eckstein and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the author discusses the investigation of ion bombardment of solids by computer simulation, with the aim of demonstrating the usefulness of this approach to the problem of interactions of ions with solids. The various chapters present the basic physics behind the simulation programs, their structure and many applications to different topics. The two main streams, the binary collision model and the classical dynamics model, are discussed, as are interaction potentials and electronic energy losses. The main topics investigated are backscattering, sputtering and implantation for incident atomic particles with energies from the eV to the MeV range. An extensive overview of the literature is given, making this book of interest to the active reseacher as well to students entering the field.

Download or read book Ordering at Surfaces and Interfaces written by Akio Yoshimori and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the third in a series of biennial NEC Symposia on Fundamental Approaches to New Material Phases sponsored by the NEC Corporation, Tokyo, Japan. The symposium was held from October 7 to 11, 1990, at the Hakone Kanko H9tel in Hakone. About 40 invited participants stayed together, became involved in intense discussions, and freely exchanged ideas both in and out of the conference room, which faced Mt. Fuji, the beautiful lake Ashinoko, and the quiet landscape in the old crater. The title of this volume, Ordering at Surfaces and Interfaces, which was also the title of the third symposium, describes the aim of the symposium: to discuss ordering properties and their underlying mechanisms at surfaces and interfaces. The topics treated include the reconstruction of surfaces of semiconductors and metals, atomic and magnetic ordering at interfaces, theoretical tools to study or dering mechanisms at surfaces and interfaces, ordering in adsorbate-surface sys tems, such as alkali-adsorbed silicon surfaces, electric current effects on semicon ductor surfaces and many related STM (scanning tunneling microscopy) results.

Download or read book Fundamentals of Geobiology written by Andrew H. Knoll and published by John Wiley & Sons. This book was released on 2012-03-30 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2012 PROSE Award, Earth Science: Honorable Mention For more than fifty years scientists have been concerned with the interrelationships of Earth and life. Over the past decade, however, geobiology, the name given to this interdisciplinary endeavour, has emerged as an exciting and rapidly expanding field, fuelled by advances in molecular phylogeny, a new microbial ecology made possible by the molecular revolution, increasingly sophisticated new techniques for imaging and determining chemical compositions of solids on nanometer scales, the development of non-traditional stable isotope analyses, Earth systems science and Earth system history, and accelerating exploration of other planets within and beyond our solar system. Geobiology has many faces: there is the microbial weathering of minerals, bacterial and skeletal biomineralization, the roles of autotrophic and heterotrophic metabolisms in elemental cycling, the redox history in the oceans and its relationship to evolution and the origin of life itself.. This book is the first to set out a coherent set of principles that underpin geobiology, and will act as a foundational text that will speed the dissemination of those principles. The chapters have been carefully chosen to provide intellectually rich but concise summaries of key topics, and each has been written by one or more of the leading scientists in that field.. Fundamentals of Geobiology is aimed at advanced undergraduates and graduates in the Earth and biological sciences, and to the growing number of scientists worldwide who have an interest in this burgeoning new discipline. Additional resources for this book can be found at: http://www.wiley.com/go/knoll/geobiology.

Download or read book High Performance Computing in Science and Engineering 03 written by Egon Krause and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in modeling and simulation on supercomputers. Leading German research groups present their results achieved on high-end systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2003. The reports cover all fields of computational science and engineering ranging from computational fluid dynamics via computational physics and chemistry to computer science. Special emphasis is given to industrially relevant applications. Presenting results for both vector-systems and micro-processor based systems, the book allows the reader to compare performance levels and usability of a variety of supercomputer architectures. In the light of the success of the Japanese Earth-Simulator, this book may serve as a guide book for a US response. The book covers the main methods in high performance computing. Its outstanding results in achieving highest performance for production codes are of particular interest for both the scientist and the engineer. The book comes with a wealth of color illustrations and tables of results.

Download or read book Polymer Surfaces and Interfaces written by Manfred Stamm and published by Springer Science & Business Media. This book was released on 2008-01-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: In what is an extremely practical and applicable new work, experts provide concise explanations, with examples and illustrations, of the key techniques in this important field. In each case, after basic principles have been reviewed, applications of the experimental techniques are discussed and illustrated with specific examples. Scientists and engineers in research and development will benefit from an application-oriented book that helps them to find solutions to both fundamental and applied problems. They will know that the surfaces and interfaces of polymers play an important role in most of the application areas of polymers, from moulds, foils, and composites, to biomaterials and applications in micro- and nanotechnology.

Download or read book Advances in the Computer Simulations of Liquid Crystals written by Paolo Pasini and published by Springer Science & Business Media. This book was released on 1999-12-31 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Erice, 11-21 June 1998

Download or read book Applications of the Monte Carlo Method in Statistical Physics written by Kurt Binder and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deals with the computer simulation of complex physical sys- tems encounteredin condensed-matter physics and statistical mechanics as well as in related fields such as metallurgy, polymer research, lattice gauge theory and quantummechanics.