Download or read book Computer Simulation Of Compression Ignition Engine Processes written by V. Ganesan and published by Universities Press. This book was released on with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to provide a simplified framework for the vast and complex map of technical material that exists on compression-ignition engines, and at the same time include sufficient details to convey the complexity of engine simulation. The emphasis here is on the thermodynamics, combustion physics and chemistry, heat transfer, and friction processes relevant to compression-ignition engines with simplifying assumpations.

Download or read book Computer Simulation Of Spark Ignition Engine Processes written by V. Ganesan and published by Universities Press. This book was released on 1996 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the theory and computer programs for the simulation of spark ignition (SI) engine processes. It starts with the fundamental concepts and goes on to the advanced level and can thus be used by undergraduates, postgraduates and Ph. D. scholars.

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Thermal System Design and Simulation written by P.L. Dhar and published by Academic Press. This book was released on 2016-10-25 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal System Design and Simulation covers the fundamental analyses of thermal energy systems that enable users to effectively formulate their own simulation and optimal design procedures. This reference provides thorough guidance on how to formulate optimal design constraints and develop strategies to solve them with minimal computational effort. The book uniquely illustrates the methodology of combining information flow diagrams to simplify system simulation procedures needed in optimal design. It also includes a comprehensive presentation on dynamics of thermal systems and the control systems needed to ensure safe operation at varying loads. Designed to give readers the skills to develop their own customized software for simulating and designing thermal systems, this book is relevant for anyone interested in obtaining an advanced knowledge of thermal system analysis and design. - Contains detailed models of simulation for equipment in the most commonly used thermal engineering systems - Features illustrations for the methodology of using information flow diagrams to simplify system simulation procedures - Includes comprehensive global case studies of simulation and optimization of thermal systems

Download or read book Internal Combustion Engine Fundamentals written by John B. Heywood and published by McGraw-Hill Education. This book was released on 1988 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, by a leading authority in the field, presents a fundamental and factual development of the science and engineering underlying the design of combustion engines and turbines. An extensive illustration program supports the concepts and theories discussed.

Download or read book Diesel Engine Transient Operation written by Constantine D. Rakopoulos and published by Springer Science & Business Media. This book was released on 2009-03-10 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.

Download or read book Quasi Dimensional Simulation of Spark Ignition Engines written by Alejandro Medina and published by Springer Science & Business Media. This book was released on 2013-08-20 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the simulations developed in research groups over the past years, Introduction to Quasi-dimensional Simulation of Spark Ignition Engines provides a compilation of the main ingredients necessary to build up a quasi-dimensional computer simulation scheme. Quasi-dimensional computer simulation of spark ignition engines is a powerful but affordable tool which obtains realistic estimations of a wide variety of variables for a simulated engine keeping insight the basic physical and chemical processes involved in the real evolution of an automotive engine. With low computational costs, it can optimize the design and operation of spark ignition engines as well as it allows to analyze cycle-to-cycle fluctuations. Including details about the structure of a complete simulation scheme, information about what kind of information can be obtained, and comparisons of the simulation results with experiments, Introduction to Quasi-dimensional Simulation of Spark Ignition Engines offers a thorough guide of this technique. Advanced undergraduates and postgraduates as well as researchers in government and industry in all areas related to applied physics and mechanical and automotive engineering can apply these tools to simulate cyclic variability, potentially leading to new design and control alternatives for lowering emissions and expanding the actual operation limits of spark ignition engines

Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.

Download or read book Design and Simulation of Two Stroke Engines written by Gordon Blair and published by SAE International. This book was released on 1996-02-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Simulation of Two-Stroke Engines is a unique hands-on information source. The author, having designed and developed many two-stroke engines, offers practical and empirical assistance to the engine designer on many topics ranging from porting layout, to combustion chamber profile, to tuned exhaust pipes. The information presented extends from the most fundamental theory to pragmatic design, development, and experimental testing issues. Chapters cover: Introduction to the Two-Stroke Engine Combustion in Two-Stroke Engines Computer Modeling of Engines Reduction of Fuel Consumption and Exhaust Emissions Reduction of Noise Emission from Two-Stroke Engines and more

Download or read book Alternative Diesel Fuels written by Daniel J Holt and published by SAE International. This book was released on 2004-01-01 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key topic of many technical discussions has been the development of alternative fuels to power the compression ignition engine. Reasons for this include the desire to reduce the dependency on petroleum-based fuel and, at the same time, to reduce the particulate matter (PM) and NOx emissions. Also, there has been interest generated in the diesel engine because of the reduction in greenhouse gases that has been proposed during the 2008-2012 time frame in Europe and the regulations that affect diesel engines in the United States.

Download or read book Application of Soft Computing Techniques in Mechanical Engineering written by Amar Patnaik and published by CRC Press. This book was released on 2022-12-14 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the latest intelligent technologies and algorithms related to the state-of-the-art methodologies of monitoring and mitigation of mechanical engineering. It covers important topics including computational fluid dynamics for advanced thermal systems, optimizing performance parameters by Fuzzy logic, design of experiments, numerical simulation, and optimizing flow network by artificial intelligence. It will serve as an ideal reference text for graduate students and academic researchers in diverse engineering fields including industrial, manufacturing, computer, mechanical, and materials science. The book- Introduces novel soft computing techniques needed to address sustainable solutions for the issues related to materials and manufacturing process. Provides perspectives for the design, development, and commissioning of intelligent applications. Discusses the latest intelligent technologies and algorithms related to the state-of-the-art methodologies of monitoring and mitigation of sustainable engineering. Explores future generation sustainable and intelligent monitoring techniques beneficial for mechanical engineering. Covers implementation of soft computing in the various areas of engineering applications. This book introduces soft computing techniques in addressing sustainable solutions for the issues related to materials and manufacturing process. It will serve as an ideal reference text for graduate students and academic researchers in diverse engineering fields including industrial, manufacturing, thermal, fluid, and materials science.

Download or read book Innovations in Fuel Economy and Sustainable Road Transport written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2011-10-19 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the Innovations in Fuel Economy and Sustainable Road Transport conference, held in Pune, India, 8-9 November, 2011. Papers examine advances in powertrain, alternative fuels, lightweight vehicles, electric vehicles and hybrid vehicles. An international assembly of senior industry representatives provide insight into research and technological advances in low carbon technology sustainability for road transport, helping towards achieving stringent emissions standards and continual improvements in fuel economy efficiency, all in an expanding Indian market. These technical papers from industry and academia discuss the developments and research of leading organisations. - Discusses maximising powertrain performance for a low carbon agenda - Provides readers with an understanding of the latest developments in alternative fuels - Examines the future landscape for the implementation and development of electric vehicles

Download or read book Recent Advancements in Mechanical Engineering written by T. S. Sudarshan and published by Springer Nature. This book was released on with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dual Fuel Diesel Engines written by Ghazi A. Karim and published by CRC Press. This book was released on 2015-03-02 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dual-Fuel Diesel Engines offers a detailed discussion of different types of dual-fuel diesel engines, the gaseous fuels they can use, and their operational practices. Reflecting cutting-edge advancements in this rapidly expanding field, this timely book:Explains the benefits and challenges associated with internal combustion, compression ignition,

Download or read book Tribological Processes in the Valve Train Systems with Lightweight Valves written by Krzysztof Jan Siczek and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribological Processes in Valvetrain Systems with Lightweight Valves: New Research and Modelling provides readers with the latest methodologies to reduce friction and wear in valvetrain systems—a severe problem for designers and manufacturers. The solution is achieved by identifying the tribological processes and phenomena in the friction nodes of lightweight valves made of titanium alloys and ceramics, both cam and camless driven. The book provides a set of structured information on the current tribological problems in modern internal combustion engines—from an introduction to the valvetrain operation to the processes that produce wear in the components of the valvetrain. A valuable resource for teachers and students of mechanical or automotive engineering, as well as automotive manufacturers, automotive designers, and tuning engineers. - Shows the tribological problems occurring in the guide-light valve-seat insert - Combines numerical and experimental solutions of wear and friction processes in valvetrain systems - Discusses various types of cam and camless drives the valves used in valve trains of internal combustion engines—both SI and CI - Examines the materials used, protective layers and geometric parameters of lightweight valves, as well as mating guides and seat inserts

Download or read book Advances in Internal Combustion Engine Research written by Dhananjay Kumar Srivastava and published by Springer. This book was released on 2017-11-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses all aspects of advanced engine technologies, and describes the role of alternative fuels and solution-based modeling studies in meeting the increasingly higher standards of the automotive industry. By promoting research into more efficient and environment-friendly combustion technologies, it helps enable researchers to develop higher-power engines with lower fuel consumption, emissions, and noise levels. Over the course of 12 chapters, it covers research in areas such as homogeneous charge compression ignition (HCCI) combustion and control strategies, the use of alternative fuels and additives in combination with new combustion technology and novel approaches to recover the pumping loss in the spark ignition engine. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.

Download or read book An Introduction to Thermodynamic Cycle Simulations for Internal Combustion Engines written by Jerald A. Caton and published by John Wiley & Sons. This book was released on 2015-12-14 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to basic thermodynamic engine cycle simulations, and provides a substantial set of results. Key features includes comprehensive and detailed documentation of the mathematical foundations and solutions required for thermodynamic engine cycle simulations. The book includes a thorough presentation of results based on the second law of thermodynamics as well as results for advanced, high efficiency engines. Case studies that illustrate the use of engine cycle simulations are also provided.