Download or read book Computer Simulation Methods in Theoretical Physics written by Dieter W. Heermann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Appropriately for a book having the title "Computer Simulation Methods in Theoretical Physics", this book begins with a disclai mer. It does not and cannot give a complete introduction to simu lational physics. This exciting field is too new and is expanding too rapidly for even an attempt to be made. The intention here is to present a selection of fundamental techniques that are now being widely applied in many areas of physics, mathematics, chem istry and biology. It is worth noting that the methods are not only applicable in physics. They have been successfully used in other sciences, showing their great flexibility and power. This book has two main chapters (Chaps. 3 and 4) dealing with deterministic and stochastic computer simulation methods. Under the heading "deterministic" are collected methods involving classical dynamics, i.e. classical equations of motion, which have become known as the molecular dynamics simulation method. The se cond main chapter deals with methods that are partly or entirely of a stochastic nature. These include Brownian dynamics and the Monte Carlo method. To aid understanding of the material and to develop intuition, problems are included at the end of each chapter. Upon a first reading, the reader is advised to skip Chapter 2, which is a general introduction to computer simUlation methods.
Download or read book Computer Simulation Methods in Theoretical Physics written by Dieter Heermann and published by Springer. This book was released on 1986-08-01 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Appropriately for a book having the title "Computer Simulation Methods in Theoretical Physics", this book begins with a disclai mer. It does not and cannot give a complete introduction to simu lational physics. This exciting field is too new and is expanding too rapidly for even an attempt to be made. The intention here is to present a selection of fundamental techniques that are now being widely applied in many areas of physics, mathematics, chem istry and biology. It is worth noting that the methods are not only applicable in physics. They have been successfully used in other sciences, showing their great flexibility and power. This book has two main chapters (Chaps. 3 and 4) dealing with deterministic and stochastic computer simulation methods. Under the heading "deterministic" are collected methods involving classical dynamics, i.e. classical equations of motion, which have become known as the molecular dynamics simulation method. The se cond main chapter deals with methods that are partly or entirely of a stochastic nature. These include Brownian dynamics and the Monte Carlo method. To aid understanding of the material and to develop intuition, problems are included at the end of each chapter. Upon a first reading, the reader is advised to skip Chapter 2, which is a general introduction to computer simUlation methods.
Download or read book Computer Simulations of Surfaces and Interfaces written by Burkhard Dünweg and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of surfaces and interactions between dissimilar materials or phases are vital for modern technological applications. Computer simulation methods are indispensable in such studies and this book contains a substantial body of knowledge about simulation methods as well as the theoretical background for performing computer experiments and analyzing the data. The book is self-contained, covering a range of topics from classical statistical mechanics to a variety of simulation techniques, including molecular dynamics, Langevin dynamics and Monte Carlo methods. A number of physical systems are considered, including fluids, magnets, polymers, granular media, and driven diffusive systems. The computer simulation methods considered include both standard and accelerated versions. The simulation methods are clearly related to the fundamental principles of thermodynamics and statistical mechanics.
Download or read book Computer Simulation in Chemical Physics written by M. P. Allen and published by Springer Science & Business Media. This book was released on 1993 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a NATO ASI held near Alghero, Italy in September 1992. The school focused on recent progress in applying the methods of computer simulation to problems in chemical physics. The 14 lectures address topics including the molecular dynamics method, advanced Monte Carlo techniques, thermodynamic constraints, computer simulations in the Gibbs ensemble, effective pair potentials and beyond, first principles molecular dynamics, computer simulation methods for nonadiabatic dynamics in condensed systems, long length- scale aspects of self organization phenomena, computer simulation of polymers, computer simulation of surfactants, parallel computing and molecular dynamics simulations, and scientific visualization--a user view. Annotation copyright by Book News, Inc., Portland, OR
Download or read book An Introduction to Computer Simulation Methods written by Harvey Gould and published by Addison Wesley Publishing Company. This book was released on 1988 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Simulation in Physics and Engineering written by Martin Oliver Steinhauser and published by Walter de Gruyter. This book was released on 2012-12-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a needed reference for widely used techniques and methods of computer simulation in physics and other disciplines, such as materials science. Molecular dynamics computes a molecule's reactions and dynamics based on physical models; Monte Carlo uses random numbers to image a system's behaviour when there are different possible outcomes with related probabilities. The work conveys both the theoretical foundations as well as applications and "tricks of the trade", that often are scattered across various papers. Thus it will meet a need and fill a gap for every scientist who needs computer simulations for his/her task at hand. In addition to being a reference, case studies and exercises for use as course reading are included.
Download or read book Monte Carlo Simulation in Statistical Physics written by Kurt Binder and published by Springer Science & Business Media. This book was released on 2010-08-17 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monte Carlo Simulation in Statistical Physics deals with the computer simulation of many-body systems in condensed-matter physics and related fields of physics, chemistry and beyond, to traffic flows, stock market fluctuations, etc.). Using random numbers generated by a computer, probability distributions are calculated, allowing the estimation of the thermodynamic properties of various systems. This book describes the theoretical background to several variants of these Monte Carlo methodsand gives a systematic presentation from which newcomers can learn to perform such simulations and to analyze their results. The fifth edition covers Classical as well as Quantum Monte Carlo methods. Furthermore a new chapter on the sampling of free energy landscapes has been added. To help students in their work a special web server has been installed to host programs and discussion groups (http://wwwcp.tphys.uni-heidelberg.de). Prof. Binder was the winner of the Berni J. Alder CECAM Award for Computational Physics 2001 as well as the Boltzmann Medal in 2007.
Download or read book Computational Physics written by Philipp Scherer and published by Springer Science & Business Media. This book was released on 2013-07-17 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents basic and advanced computational physics in a very didactic style. It contains very-well-presented and simple mathematical descriptions of many of the most important algorithms used in computational physics. The first part of the book discusses the basic numerical methods. The second part concentrates on simulation of classical and quantum systems. Several classes of integration methods are discussed including not only the standard Euler and Runge Kutta method but also multi-step methods and the class of Verlet methods, which is introduced by studying the motion in Liouville space. A general chapter on the numerical treatment of differential equations provides methods of finite differences, finite volumes, finite elements and boundary elements together with spectral methods and weighted residual based methods. The book gives simple but non trivial examples from a broad range of physical topics trying to give the reader insight into not only the numerical treatment but also simulated problems. Different methods are compared with regard to their stability and efficiency. The exercises in the book are realised as computer experiments.
Download or read book Computer Meets Theoretical Physics written by Giovanni Battimelli and published by Springer Nature. This book was released on 2020-06-17 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a vivid account of the early history of molecular simulation, a new frontier for our understanding of matter that was opened when the demands of theoretical physicists were met by the availability of the modern computers. Since their inception, electronic computers have enormously increased their performance, thus making possible the unprecedented technological revolution that characterizes our present times. This obvious technological advancement has brought with it a silent scientific revolution in the practice of theoretical physics. In particular, in the physics of matter it has opened up a direct route from the microscopic physical laws to observable phenomena. One can now study the time evolution of systems composed of millions of molecules, and simulate the behaviour of macroscopic materials and actually predict their properties. Molecular simulation has provided a new theoretical and conceptual tool that physicists could only dream of when the foundations of statistical mechanics were laid. Molecular simulation has undergone impressive development, both in the size of the scientific community involved and in the range and scope of its applications. It has become the ubiquitous workhorse for investigating the nature of complex condensed matter systems in physics, chemistry, materials and the life sciences. Yet these developments remain largely unknown outside the inner circles of practitioners, and they have so far never been described for a wider public. The main objective of this book is therefore to offer a reasonably comprehensive reconstruction of the early history of molecular simulation addressed to an audience of both scientists and interested non-scientists, describing the scientific and personal trajectories of the main protagonists and discussing the deep conceptual innovations that their work produced.
Download or read book An Introduction to Computer Simulation Methods Appendices written by Harvey Gould and published by . This book was released on 1988 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monte Carlo Methods in Statistical Physics written by Kurt Binder and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the seven years since this volume first appeared. there has been an enormous expansion of the range of problems to which Monte Carlo computer simulation methods have been applied. This fact has already led to the addition of a companion volume ("Applications of the Monte Carlo Method in Statistical Physics", Topics in Current Physics. Vol . 36), edited in 1984, to this book. But the field continues to develop further; rapid progress is being made with respect to the implementation of Monte Carlo algorithms, the construction of special-purpose computers dedicated to exe cute Monte Carlo programs, and new methods to analyze the "data" generated by these programs. Brief descriptions of these and other developments, together with numerous addi tional references, are included in a new chapter , "Recent Trends in Monte Carlo Simulations" , which has been written for this second edition. Typographical correc tions have been made and fuller references given where appropriate, but otherwise the layout and contents of the other chapters are left unchanged. Thus this book, together with its companion volume mentioned above, gives a fairly complete and up to-date review of the field. It is hoped that the reduced price of this paperback edition will make it accessible to a wide range of scientists and students in the fields to which it is relevant: theoretical phYSics and physical chemistry , con densed-matter physics and materials science, computational physics and applied mathematics, etc.
Download or read book Computer Simulations in Condensed Matter From Materials to Chemical Biology written by Mauro Ferrario and published by Springer. This book was released on 2006-11-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive collection of lectures by leading experts in the field introduces and reviews all relevant computer simulation methods and their applications in condensed matter systems. Volume 1 is an in-depth introduction to a vast spectrum of computational techniques for statistical mechanical systems of condensed matter. Volume 2 is a collection of state-of-the-art surveys on numerical experiments carried out for a great number of systems.
Download or read book Computer Simulation Using Particles written by R.W Hockney and published by CRC Press. This book was released on 2021-03-24 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation of systems has become an important tool in scientific research and engineering design, including the simulation of systems through the motion of their constituent particles. Important examples of this are the motion of stars in galaxies, ions in hot gas plasmas, electrons in semiconductor devices, and atoms in solids and liquids. The behavior of the system is studied by programming into the computer a model of the system and then performing experiments with this model. New scientific insight is obtained by observing such computer experiments, often for controlled conditions that are not accessible in the laboratory. Computer Simulation using Particles deals with the simulation of systems by following the motion of their constituent particles. This book provides an introduction to simulation using particles based on the NGP, CIC, and P3M algorithms and the programming principles that assist with the preparations of large simulation programs based on the OLYMPUS methodology. It also includes case study examples in the fields of astrophysics, plasmas, semiconductors, and ionic solids as well as more detailed mathematical treatment of the models, such as their errors, dispersion, and optimization. This resource will help you understand how engineering design can be assisted by the ability to predict performance using the computer model before embarking on costly and time-consuming manufacture.
Download or read book Computer Simulations in Condensed Matter From Materials to Chemical Biology Volume 1 written by Mauro Ferrario and published by Springer. This book was released on 2007-03-09 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive collection of lectures by leading experts in the field introduces and reviews all relevant computer simulation methods and their applications in condensed matter systems. Volume 1 is an in-depth introduction to a vast spectrum of computational techniques for statistical mechanical systems of condensed matter. Volume 2 is a collection of state-of-the-art surveys on numerical experiments carried out for a great number of systems.
Download or read book A Guide to Monte Carlo Simulations in Statistical Physics written by David P. Landau and published by Cambridge University Press. This book was released on 2000-08-17 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes all aspects of Monte Carlo simulation of complex physical systems encountered in condensed-matter physics and statistical mechanics, as well as in related fields, such as polymer science and lattice gauge theory. The authors give a succinct overview of simple sampling methods and develop the importance sampling method. In addition they introduce quantum Monte Carlo methods, aspects of simulations of growth phenomena and other systems far from equilibrium, and the Monte Carlo Renormalization Group approach to critical phenomena. The book includes many applications, examples, and current references, and exercises to help the reader.
Download or read book Computer Simulation of Dynamic Phenomena written by Mark L. Wilkins and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of computer programs for simulating phenomena in hydrodynamics, gas dynamics, and elastic plastic flow in one, two, and three dimensions. The text covers Maxwell's equations, and thermal and radiation diffusion, while the numerical procedures described permit the exact conservation of physical properties in the solutions of the fundamental laws of mechanics. The author also treats materials, including the use of simulation programs to predict material behavior.
Download or read book Computational Physics written by Philipp O.J. Scherer and published by Springer. This book was released on 2017-09-07 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents basic numerical methods and applies them to a large variety of physical models in multiple computer experiments. Classical algorithms and more recent methods are explained. Partial differential equations are treated generally comparing important methods, and equations of motion are solved by a large number of simple as well as more sophisticated methods. Several modern algorithms for quantum wavepacket motion are compared. The first part of the book discusses the basic numerical methods, while the second part simulates classical and quantum systems. Simple but non-trivial examples from a broad range of physical topics offer readers insights into the numerical treatment but also the simulated problems. Rotational motion is studied in detail, as are simple quantum systems. A two-level system in an external field demonstrates elementary principles from quantum optics and simulation of a quantum bit. Principles of molecular dynamics are shown. Modern boundary element methods are presented in addition to standard methods, and waves and diffusion processes are simulated comparing the stability and efficiency of different methods. A large number of computer experiments is provided, which can be tried out even by readers with no programming skills. Exercises in the applets complete the pedagogical treatment in the book. In the third edition Monte Carlo methods and random number generation have been updated taking recent developments into account. Krylov-space methods for eigenvalue problems are discussed in much more detail. Short time Fourier transformation and wavelet transformation have been included as tools for time-frequency analysis. Lastly, elementary quantum many-body problems demonstrate the application of variational and Monte-Carlo methods.
