Download or read book Computer Aided Injection Mold Design and Manufacture written by J.Y.H. Fuh and published by CRC Press. This book was released on 2004-08-02 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining processes that affect more than 70 percent of consumer products ranging from computers to medical devices and automobiles, this reference presents the latest research in automated plastic injection and die casting mold design and manufacture. It analyzes many industrial examples and methodologies while focusing on the algorithms, implementation procedures, and system architectures that will lead to a fully automated or semi-automated computer-aided injection mold design system (CADIMDS). This invaluable guide in this challenging area of precision engineering summarizes key findings and innovations from the authors' many years of research on intelligent mold design technologies.
Download or read book Computer Aided Injection Mold Design and Manufacture written by J.Y.H. Fuh and published by CRC Press. This book was released on 2004-08-02 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining processes that affect more than 70 percent of consumer products ranging from computers to medical devices and automobiles, this reference presents the latest research in automated plastic injection and die casting mold design and manufacture. It analyzes many industrial examples and methodologies while focusing on the algorithms, implemen
Download or read book Computer Aided Design and Manufacturing written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-02-04 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.
Download or read book Injection Mold Design Engineering written by David O. Kazmer and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2012-11-12 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a vision and structure to finally synergize all the engineering disciplines that converge in the mold design process. The topics are presented in a top-down manner, beginning with introductory definitions and the "big picture" before proceeding to layout and detailed design of molds. The book provides very pragmatic analysis with worked examples that can be readily adapted to "real world" mold design applications. It should help students and practitioners to understand the inner workings of injection molds and encourage them to think "outside the box" in developing innovative and highly functional mold designs. Contents: · Introduction to mold functions, types, and components · Review of design for injection molding · Cost estimation and optimization · Mold layout design including cavity layout, sizing, and materials selection · Cavity, runner system, and gating analysis and design · Cooling system analysis and design · Venting, shrinkage, and warpage analysis and strategies · Ejection force analysis and ejection system designs · Stress and deflection analysis with structural system designs · A survey of advanced mold designs
Download or read book Computer Modeling for Injection Molding written by Huamin Zhou and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of applications and uses of simulation and modeling techniques in polymer injection molding, filling a noticeable gap in the literature of design, manufacturing, and the use of plastics injection molding. The authors help readers solve problems in the advanced control, simulation, monitoring, and optimization of injection molding processes. The book provides a tool for researchers and engineers to calculate the mold filling, optimization of processing control, and quality estimation before prototype molding.
Download or read book How to Make Injection Molds written by Georg Menges and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2013-03-18 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economic success in the plastics processing industry depends on the quality, precision, and reliability of its most common tool: the injection mold. Consequently, misjudgments in design and mistakes in the manufacturing of molds can result in grave consequences. This comprehensive handbook for the design and manufacture of injection molds covers all aspects of how to successfully make injection molds from a practical as well as from a theoretical point of view. It should serve as an indispensable reference work for everyone engaged in mold making. "...an example of how books should be written ... will be used by molders, mold designers and mold makers and will become a standard." (Polymer News) Contents: · Materials for Injection Molds · Mold Making Techniques · Estimating Mold Costs · The Injection Molding Process · Design of Runner Systems · Design of Gates · Venting of Molds · Heat Exchange System · Shrinkage · Mechanical Design · Shifting of Cores · Ejection · Alignment and Changing of Molds · Computer-Aided Mold Design and Construction · Maintenance of Injection Molds · Measuring in Injection Molds · Temperature Controllers · Mold Standards · Correction of Molding Defects · Special Processes - Special Molds
Download or read book Injection Molding Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.
Download or read book Plastics Engineering Handbook Of The Society Of The Plastics Industry written by Society of the Plastics Industry and published by Springer Science & Business Media. This book was released on 1991-08-31 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive guide to plastics processing methods, equipment and materials
Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2019-04-23 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standa
Download or read book Computer Aided And Integrated Manufacturing Systems A 5 volume Set Volume 5 Manufacturing Processes written by Cornelius T Leondes and published by World Scientific. This book was released on 2003-09-29 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.
Download or read book Realistic Cost Estimating for Manufacturing 3rd Edition written by Michael Lembersky and published by SME. This book was released on 2016-01-04 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most effective way to generate an estimate of a new product’s cost engineering change cost, or innovation cost is through a detailed cost investigation. Analysis of the available materials and processes leads to the most economical and financial decisions. Now in its third edition, Realistic Cost Estimating for Manufacturing has been used by students and practitioners since 1968 in this endeavor. Revised and expanded, the book recognizes the extremely important role estimating is playing in today’s highly competitive global economy. Realistic Cost Estimating for Manufacturing provides a survey of the myriad manufacturing processes and practices and combines this with in-depth explanations and examples of costing methods and tools. A comprehensive, standardized approach to their application is given. Among the manufacturing processes surveyed are: machining, casting, stamping, forging, welding, plastics technology, finishing, and rapid prototyping. To develop realistic baseline estimates, an engineering or costing professional must have an in-depth understanding of costing methods and techniques. As a fundamental reference, the book provides insight into the art, science, and functions of cost estimation in a wide range of activities: product design and manufacturing, engineering change control, proposal development, make or buy studies, identifying cost reduction opportunities, component costing, reverse engineering, benchmarking, and examining alternative processes, materials, machines, and tooling. As examples, it will aid the practitioner in efforts to justify the replacement or improvement of existing technology with new creative solutions; perform a feasibility study; develop a basis for cost-oriented decision support; improve supply chain evaluation and sourcing analysis; and minimize costs. The third edition has been greatly enhanced with new chapters and material dedicated to the roles of economics and finance, cost reduction, continuous improvement, plastic parts, electronics cost estimating, costing studies, advanced manufacturing processes, and quality costs. Further, the existing chapters have been significantly expanded to include new processes and operations and examples to enhance learning. Since nontraditional technology is widely applied in manufacturing, its costing aspects are also explored. Five Appendices provide additional information on productivity based on efficiency, cost reduction, matching part features to manufacturing processes, packaging cost, and inspection and measurement costs. As with its previous editions, instructors of cost estimating courses can rely on the book to provide a solid foundation for manufacturing engineering courses and programs of study. The book is also useful for on-the-job training courses for engineers, managers, estimators, designers, and practitioners. It can be applied in seminars and workshops specifically dedicated to product or component cost reduction, alternative cost analysis, engineering change cost control, or proposal development. As in the previous editions, there are multiple equations and calculation examples, as well as end-of-chapter questions to test student’s knowledge. An instructor’s guide is also available.
Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Download or read book Tool and Manufacturing Engineers Handbook Plastic Part Manufacturing written by Philip Mitchell and published by Society of Manufacturing Engineers. This book was released on 1996-12-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the practical application of processes for manufacturing plastic products. It includes information on design for manufacturability (DFM), material selection, process selection, dies, molds, and tooling, extrusion, injection molding, blow molding, thermoforming, lamination, rotational molding, casting, foam processing, compression and transfer molding, fiber reinforced processing, assembly and fabrication, quality, plant engineering and maintenance, management.
Download or read book Computer Aided and Integrated Manufacturing Systems written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene. The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved. Contents: .: Techniques and Applications of Production Planning in Electronics Manufacturing Systems (J Smed et al.); Economic Optimization of Machining Operations in Computer Aided Manufacturing Systems (J Wang); Computer Techniques and Applications for Real-Time Embedded Control in Mechatronic Systems (M Colnaric & W A Halang); and other articles. Readership: Graduate students, academics, researchers, and industrialists in computer engineering, industrial engineering, mechanical engineering, systems engineering, artificial intelligence and operations management
Download or read book Practical Guide to Digital Manufacturing written by Zhuming Bi and published by Springer Nature. This book was released on 2021-05-24 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the subject of digital manufacturing. It provides a practical guide for readers on using computer aided design (CAD), computer aided engineering (CAE) and computer aided manufacturing (CAM) and other computer assistive tools for the design of products, machines, processes and system integrations through the case studies of engineering projects. The book introduces a thorough theoretical foundation and discussion of the historical development, and enabling technologies of digital manufacturing. It also covers a broad range of computer aided tools for a variety of applications including: geometric modelling; assembly modelling; motion simulation; finite element analysis; manufacturing process simulation; machining programming; product data management; and, product lifecycle management. Practical Guide to Digital Manufacturing uses many real-world case studies to illustrate the discussed applications, making it easily readable for undergraduate and graduate students, as well as engineers with the needs of computer-aided design and manufacturing knowledge and skills.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1983 with total page 1368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Research Reports written by and published by . This book was released on 1984 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
