Download or read book Computer aided Analysis of Nonlinear Microwave Circuits written by Paulo J. C. Rodrigues and published by Artech House Publishers. This book was released on 1998 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive new book helps fortify your understanding of the most popular time- and frequency-domain techniques used to analyze nonlinear microwave circuits -- and shows you how to get better performance from these techniques using circuit-analysis software.
Download or read book Nonlinear Circuit Simulation and Modeling written by José Carlos Pedro and published by Cambridge University Press. This book was released on 2018-06-14 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, tutorial guide to the nonlinear methods and techniques needed to design real-world microwave circuits.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis, (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity was transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 19 (thesis year 1974) a total of 10,045 theses titles from 20 Canadian and 209 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 19 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.
Download or read book Fundamentals of Computer Aided Circuit Simulation written by William J. McCalla and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: From little more than a circuit-theoretical concept in 1965, computer-aided circuit simulation developed into an essential and routinely used design tool in less than ten years. In 1965 it was costly and time consuming to analyze circuits consisting of a half-dozen transistors. By 1975 circuits composed of hundreds of transistors were analyzed routinely. Today, simulation capabilities easily extend to thousands of transistors. Circuit designers use simulation as routinely as they used to use a slide rule and almost as easily as they now use hand-held calculators. However, just as with the slide rule or hand-held calculator, some designers are found to use circuit simulation more effectively than others. They ask better questions, do fewer analyses, and get better answers. In general, they are more effective in using circuit simulation as a design tool. Why? Certainly, design experience, skill, intuition, and even luck contribute to a designer's effectiveness. At the same time those who design and develop circuit simulation programs would like to believe that their programs are so easy and straightforward to use, so well debugged and so efficient that even their own grandmother could design effectively using their program.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1985 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon And Beyond Advanced Device Models And Circuit Simulators written by Tor A Fjeldly and published by World Scientific. This book was released on 2000-04-20 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The steady downscaling of device-feature size combined with a rapid increase in circuit complexity as well as the introduction of new device concepts based on non-silicon-material systems poses great challenges for device and circuit designers. One of the major tasks is the development of new and improved device models needed for accurate device and circuit design. Another task is the development of new circuit-simulation tools to handle very large and complex circuits. This book addresses both these issues with up-to-date reviews written by leading experts in the field.The first three chapters of the book discuss advanced device models both for existing technologies and for new, emerging technologies. Among the topics covered are models for MOSFETs, thin-film transitors (TFTs), and compound semiconductor devices, including GaAs HEMTs and HFETs, heterodimensional devices, quantum-tunneling devices, as well as wide-bandgap devices. Chapters 4 and 5 discuss advanced circuit simulators that hold promise for handling circuits of much higher complexity than what is possible for typical state-of-the-art circuit simulators today.
Download or read book ICP Quarterly written by International Computer Programs, inc and published by . This book was released on 1970 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Analysis of Power Electronic Systems written by Venkatachari Rajagopalan: and published by CRC Press. This book was released on 1987-04-29 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parameter Extraction and Complex Nonlinear Transistor Models written by Gunter Kompa and published by Artech House. This book was released on 2019-12-31 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: All model parameters are fundamentally coupled together, so that directly measured individual parameters, although widely used and accepted, may initially only serve as good estimates. This comprehensive resource presents all aspects concerning the modeling of semiconductor field-effect device parameters based on gallium-arsenide (GaAs) and gallium nitride (GaN) technology. Metal-semiconductor field-effect transistors (MESFETs), high electron mobility transistors (HEMTs) and heterojunction bipolar transistors (HBTs), their structures and functions, and existing transistor models are also classified. The Shockley model is presented in order to give insight into semiconductor field-effect transistor (FET) device physics and explain the relationship between geometric and material parameters and device performance. Extraction of trapping and thermal time constants is discussed. A special section is devoted to standard nonlinear FET models applied to large-signal measurements, including static-/pulsed-DC and single-/two-tone stimulation. High power measurement setups for signal waveform measurement, wideband source-/load-pull measurement (including envelope source-/load pull) are also included, along with high-power intermodulation distortion (IMD) measurement setup (including envelope load-pull). Written by a world-renowned expert in the field, this book is the first to cover of all aspects of semiconductor FET device modeling in a single volume.
Download or read book Computer Aided Design Techniques written by E. Wolfendale and published by Butterworth-Heinemann. This book was released on 2014-05-15 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-aided Design Techniques deals with the tools used in computer-aided design, problems associated with software development for design, and techniques applied in the development of the REDAC system. The book covers topics such as program design, requirements of a program for general use, and representation of the circuit in a computer; device modeling, general linear modeling, and linear and non-linear transistor modeling; and non-linear transient analysis. Also covered are topics such as layout capacitances and inductances computation; the use of graphic display as a drawing aid for circuit layout; and the writing of design programs. The text is recommended for engineers and physicists who would like to know how computers can aid them in design, as well as computer experts who aim to write programs intended for design.
Download or read book Analog Circuit Design written by Michiel Steyaert and published by Springer Science & Business Media. This book was released on 2006-03-14 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Circuit Design contains the contribution of 18 tutorials of the 14th workshop on Advances in Analog Circuit Design. Each part discusses a specific todate topic on new and valuable design ideas in the area of analog circuit design. Each part is presented by six experts in that field and state of the art information is shared and overviewed. This book is number 14 in this successful series of Analog Circuit Design, providing valuable information and excellent overviews of analog circuit design, CAD and RF systems. Analog Circuit Design is an essential reference source for analog circuit designers and researchers wishing to keep abreast with the latest development in the field. The tutorial coverage also makes it suitable for use in an advanced design course.
Download or read book Computer Aided Design of Analog Integrated Circuits and Systems written by Rob A. Rutenbar and published by John Wiley & Sons. This book was released on 2002-05-06 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.
Download or read book RF and Microwave Circuits Measurements and Modeling written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the challenges RF and microwave circuit designers face in their day-to-day tasks, RF and Microwave Circuits, Measurements, and Modeling explores RF and microwave circuit designs in terms of performance and critical design specifications. The book discusses transmitters and receivers first in terms of functional circuit block and then examines each block individually. Separate articles consider fundamental amplifier issues, low noise amplifiers, power amplifiers for handset applications and high power, power amplifiers. Additional chapters cover other circuit functions including oscillators, mixers, modulators, phase locked loops, filters and multiplexers. New chapters discuss high-power PAs, bit error rate testing, and nonlinear modeling of heterojunction bipolar transistors, while other chapters feature new and updated material that reflects recent progress in such areas as high-volume testing, transmitters and receivers, and CAD tools. The unique behavior and requirements associated with RF and microwave systems establishes a need for unique and complex models and simulation tools. The required toolset for a microwave circuit designer includes unique device models, both 2D and 3D electromagnetic simulators, as well as frequency domain based small signal and large signal circuit and system simulators. This unique suite of tools requires a design procedure that is also distinctive. This book examines not only the distinct design tools of the microwave circuit designer, but also the design procedures that must be followed to use them effectively.
Download or read book COSMIC written by United States. National Aeronautics and Space Administration and published by . This book was released on 1977 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The RF and Microwave Handbook written by Mike Golio and published by CRC Press. This book was released on 2000-12-20 with total page 1377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent shift in focus from defense and government work to commercial wireless efforts has caused the job of the typical microwave engineer to change dramatically. The modern microwave and RF engineer is expected to know customer expectations, market trends, manufacturing technologies, and factory models to a degree that is unprecedented in the
Download or read book Computer Aided Design and Design Automation written by Wai-Kai Chen and published by CRC Press. This book was released on 2018-03-12 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of The Circuits and Filters Handbook, Third Edition focuses on computer aided design and design automation. In the first part of the book, international contributors address topics such as the modeling of circuit performances, symbolic analysis methods, numerical analysis methods, design by optimization, statistical design optimization, and physical design automation. In the second half of the text, they turn their attention to RF CAD, high performance simulation, formal verification, RTK behavioral synthesis, system-level design, an Internet-based micro-electronic design automation framework, performance modeling, and embedded computing systems design.
Download or read book Graduate Announcement written by University of Michigan--Dearborn and published by . This book was released on 1990 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
