Download or read book Computed Electron Micrographs And Defect Identification written by A.K. Head and published by Elsevier. This book was released on 2012-12-02 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computed Electron Micrographs and Defect Identification illustrates a technique for identifying defects in crystalline solids by the comparison of their images, which are produced in the electron microscope, with corresponding theoretical images. This book discusses the diffraction of electrons by a crystal; the two-beam dynamical equations; the absorption parameters; the deviation of the crystal from the Bragg reflecting position; the extinction distance; the displacement vector; and the foil normal. Chapter three presents the experimental techniques for determination of beam direction, defect line normal, foil normal, foil thickness, and extinction distance. Chapters four to seven explore ONEDIS and TWODIS and their principles. Chapters eight and nine focus on the application and limitations of the technique, while the last chapter explores the different computer programs related to the technique. Post-graduate students, as well as researchers using transmission electron microscopy for studying defects in crystalline solids, will find this book invaluable.
Download or read book Computed Electron Micrographs and Defect Identification written by a. k. Head (+and others) and published by . This book was released on 1973 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diffraction and Imaging Techniques in Material Science P1 written by S Amelinckx and published by Elsevier. This book was released on 2012-12-02 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffraction and Imaging Techniques in Material Science describes the various methods used to study the atomic structure of matter at an atomic scale based on the interaction between matter and radiation. It classifies the possible methods of observation by making a list of radiations on the basis of wavelength, including ions, X-ray photons, neutrons, and electrons. It also discusses transmission electron microscopy, the weak-beam method of electron microscopy, and some applications of transmission electron microscopy to phase transitions. Organized into 13 chapters, this volume begins with an overview of the kinematic theory of electron diffraction and the ways to treat diffraction by a deformed crystal. It discusses the dynamical theory of diffraction of fast electrons, the treatment of absorption in the dynamical theory of electron diffraction, the use of electron microscopy to study planar interfaces, and analysis of weak-beam images. The book also covers the use of computed electron micrographs in defect identification, crystallographic analysis of dislocation loops containing shear components, and detection and identification of small coherent particles. In addition, the reader is introduced to interpretation of diffuse scattering and short-range order, along with the crystallography of martensitic transformations. The remaining chapters focus on the working principle of the transmission electron microscope, experimental structure imaging of crystals, and the study of diffuse scattering effects originating from substitutional disorder and displacement disorder. The information on diffraction and imaging techniques in material science contained in this book will be helpful to students, researchers, and scientists.
Download or read book Computed Electron Micrographs and Defect Humble written by A.K. Head and published by . This book was released on 1973 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computed Electron Micrographs and Defect Indentification written by and published by . This book was released on 1973 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defect Analysis in Electron Microscopy written by M. H. Loretto and published by . This book was released on 1975 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Resolution Transmission Electron Microscopy written by Peter Buseck and published by Oxford University Press. This book was released on 1989-02-02 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to the fundamental concepts, techniques, and methods used for electron microscopy at high resolution in space, energy, and even in time. It delineates the theory of elastic scattering, which is most useful for spectroscopic and chemical analyses. There are also discussions of the theory and practice of image calculations, and applications of HRTEM to the study of solid surfaces, highly disordered materials, solid state chemistry, mineralogy, semiconductors and metals. Contributors include J. Cowley, J. Spence, P. Buseck, P. Self, and M.A. O'Keefe. Compiled by experts in the fields of geology, physics and chemistry, this comprehensive text will be the standard reference for years to come.
Download or read book Transmission Electron Microscopy and Diffractometry of Materials written by Brent Fultz and published by Springer Science & Business Media. This book was released on 2012-10-13 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains concepts of transmission electron microscopy (TEM) and x-ray diffractometry (XRD) that are important for the characterization of materials. The fourth edition adds important new techniques of TEM such as electron tomography, nanobeam diffraction, and geometric phase analysis. A new chapter on neutron scattering completes the trio of x-ray, electron and neutron diffraction. All chapters were updated and revised for clarity. The book explains the fundamentals of how waves and wavefunctions interact with atoms in solids, and the similarities and differences of using x-rays, electrons, or neutrons for diffraction measurements. Diffraction effects of crystalline order, defects, and disorder in materials are explained in detail. Both practical and theoretical issues are covered. The book can be used in an introductory-level or advanced-level course, since sections are identified by difficulty. Each chapter includes a set of problems to illustrate principles, and the extensive Appendix includes laboratory exercises.
Download or read book The Growth of Electron Microscopy written by and published by Academic Press. This book was released on 1996-08-05 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a complement to The Beginnings of Electron Microscopy, Advances in Imaging and Electron Physics is pleased to present Volume 96, The Growth of Electron Microscopy. This comprehensive collection of articles surveys the accomplishments of various national groups that comprise the International Federation of Societies of Electron Microscopy (IFSEM).
Download or read book Extended Defects in Semiconductors written by D. B. Holt and published by Cambridge University Press. This book was released on 2007-04-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of the basic properties of structurally extended defects, their effect on the electronic properties of semiconductors, their role in semiconductor devices, and techniques for their characterization. This text is suitable for advanced undergraduate and graduate students in materials science and engineering, and for those studying semiconductor physics.
Download or read book Defects and Their Structure in Nonmetallic Solids written by B. Henderson and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Study Institute of which this volume is the proceedings was held at the University of Exeter during 24 August to 6 September 1975. There were seventy participants of whom eighteen were lecturers and members of the advisory committee. All NATO countries except Holland, Iceland and Portugal were re presented. In addition a small number of participants came from non-NATO countries Japan, Ireland and Switzerland. An aim of the organising committee was to bring together scientists of wide interests and expertise in the defect structure of insulators and semiconductors. Thus major emphases in the pro gramme concerned the use of spectroscopy and microscopy in revealing the structure of point defects and their aggregates, line defects as well as planar and volume defects. The lectures revealed that in general little is known of the fate of the interstitial in most irradiated solids. Nor are the dynamic properties of defects under stood in sufficient detail that one can state how point defects cluster and eventually become macroscopic defects. Although this book faithfully reproduces the material covered by the invited speakers, it does not really follow the flow of the lectures. This is because it seemed advisable for each lecturer to provide a single self-contained and authoritative manuscript, rather than a series of short articles corresponding to the lectures.
Download or read book Evaluation of Advanced Semiconductor Materials by Electron Microscopy written by David Cherns and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last few years have ~een rapid improvements in semiconductor growth techniques which have produced an expanding range of high quality heterostructures for new semiconductor devises. As the dimensions of such structures approach the nanometer level, it becomes increasingly important to characterise materials properties such as composition uniformity, strain, interface sharpness and roughness and the nature of defects, as well as their influence on electrical and optical properties. Much of this information is being obtained by electron microscopy and this is also an area of rapid progress. There have been advances for thin film studies across a wide range of techniques, including, for example, convergent beam electron diffraction, X-ray and electron energy loss microanalysis and high spatial resolution cathodoluminescence as well as by conventional and high resolution methods. Important develop ments have also occurred in the study of surfaces and film growth phenomena by both microscopy and diffraction techniques. With these developments in mind, an application was made to the NATO Science Committee in late summer 1987 to fund an Advanced Research Work shop to review the electron microscopy of advanced semiconductors. This was subsequently accepted for the 1988 programme and became the "NATO Advanced Research Workshop on the Evaluation of Advanced Semiconductor Materials by Electron Microscopy". The Workshop took place in the pleasant and intimate surroundings of Wills Hall, Bristol, UK, during the week 11-17 September 1988 and was attended by fifty-five participants from fourteen countries.
Download or read book Principles of Analytical Electron Microscopy written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication in 1979 of Introduction to Analytical Electron Microscopy (ed. J. J. Hren, J. I. Goldstein, and D. C. Joy; Plenum Press), analytical electron microscopy has continued to evolve and mature both as a topic for fundamental scientific investigation and as a tool for inorganic and organic materials characterization. Significant strides have been made in our understanding of image formation, electron diffraction, and beam/specimen interactions, both in terms of the "physics of the processes" and their practical implementation in modern instruments. It is the intent of the editors and authors of the current text, Principles of Analytical Electron Microscopy, to bring together, in one concise and readily accessible volume, these recent advances in the subject. The text begins with a thorough discussion of fundamentals to lay a foundation for today's state-of-the-art microscopy. All currently important areas in analytical electron microscopy-including electron optics, electron beam/specimen interactions, image formation, x-ray microanalysis, energy-loss spectroscopy, electron diffraction and specimen effects-have been given thorough attention. To increase the utility of the volume to a broader cross section of the scientific community, the book's approach is, in general, more descriptive than mathematical. In some areas, however, mathematical concepts are dealt with in depth, increasing the appeal to those seeking a more rigorous treatment of the subject.
Download or read book Electron Beam Analysis of Materials written by M. H. Loretto and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The examination of materials using electron beam techniques has developed continuously for over twenty years and there are now many different methods of extracting detailed structural and chemical information using electron beams. These techniques which include electron probe microanalysis, trans mission electron microscopy, Auger spectroscopy and scanning electron microscopy have, until recently, developed more or less independently of each other. Thus dedicated instruments designed to optimize the performance for a specific application have been available and correspondingly most of the available textbooks tend to have covered the theory and practice of an individual technique. There appears to be no doubt that dedicated instru ments taken together with the specialized textbooks will continue to be the appropriate approach for some problems. Nevertheless the underlying electron-specimen interactions are common to many techniques and in view of the fact that a range of hybrid instruments is now available it seems appropriate to provide a broad-based text for users of these electron beam facilities. The aim of the present book is therefore to provide, in a reasonably concise form, the material which will allow the practitioner of one or more of the individual techniques to appreciate and to make use of the type of information which can be obtained using other electron beam techniques.
Download or read book A Practical Guide to Transmission Electron Microscopy written by Zhiping Luo and published by Momentum Press. This book was released on 2015-12-04 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transmission Electron Microscope (TEM) is a very powerful tool for characterizing various types of materials. Using a light microscope, the imaging resolution is at several hundred nanometers, and for a Scanning Electron Microscope (SEM) at several nanometers. The imaging resolution of the TEM, however, can routinely reach several angstroms on a modem instrument. In addition, the TEM can also provide material structural information, since the electrons penetrate through the thin specimens, and chemical compositional information due to the strong electron-specimen atom interactions. This book provides a concise practical guide to the TEM user, starting from the beginner level, including upper-division undergraduates, graduates, researchers, and engineers, on how to learn TEM efficiently in a short period of time. It covers most of the areas using TEM, including the instrumentation, sample preparation, diffraction, imaging, analytical microscopy, and some newly developed advanced microscopy techniques. This book may serve as a textbook for a TEM course or workshop, or a reference book for the TEM user to improve their TEM skills.
Download or read book Large Angle Convergent Beam Electron Diffraction Applications to Crystal Defects written by Jean- Paul Morniroli and published by CRC Press. This book was released on 2004-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: A publication of the French Society of Microscopies, Large-Angle Convergent-Beam Electron Diffraction Applications to Crystal Defects is devoted to an important aspect of electron diffraction. Convergent-beam diffraction is capable of furnishing remarkably accurate crystallographic information. In this book, the author goes well beyond a simple presentation of the method. The description of convergent-beam electron diffraction and especially of LACBED is preceded by several preparatory chapters, in which the principles of diffraction and the nature of electron-matter interactions are clearly set out. An entire chapter is concerned with instrumentation. Another on the interpretation of diffraction patterns enables the reader to master all stages in the process. The book ends with a long chapter in which numerous applications concerned with the characterization of crystal defects are examined and analyzed.
Download or read book Multicomponent and Multilayered Thin Films for Advanced Microtechnologies Techniques Fundamentals and Devices written by O. Auciello and published by Springer Science & Business Media. This book was released on 1993-04-30 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute on Multicomponent and Multilayered Thin Films for Advanced Microtechnologies, Bad Windsheim, Germany, September 21-October 2, 1992
