Download or read book Computational Simulation of the High Strain Rate Tensile Response of Polymer Matrix Composites written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-19 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: A research program is underway to develop strain rate dependent deformation and failure models for the analysis of polymer matrix composites subject to high strain rate impact loads. Under these types of loading conditions, the material response can be highly strain rate dependent and nonlinear. State variable constitutive equations based on a viscoplasticity approach have been developed to model the deformation of the polymer matrix. The constitutive equations are then combined with a mechanics of materials based micromechanics model which utilizes fiber substructuring to predict the effective mechanical and thermal response of the composite. To verify the analytical model, tensile stress-strain curves are predicted for a representative composite over strain rates ranging from around 1 x 10(exp -5)/sec to approximately 400/sec. The analytical predictions compare favorably to experimentally obtained values both qualitatively and quantitatively. Effective elastic and thermal constants are predicted for another composite, and compared to finite element results. Goldberg, Robert K. Glenn Research Center NASA/TM-2002-211489, E-13257, NAS 1.15:211489
Download or read book Computational Simulation of the High Strain Rate Tensile Response of Polymer Matrix Composites written by and published by . This book was released on 2002 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Charles E. Bakis and published by ASTM International. This book was released on 2003 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The 14th ASTM Symposium on Composite Materials: Testing and Design, was held March 11-12, 2002 in Pittsburgh, PA. The Testing and Design symposia, sponsored by Committee D30 on Composite Materials, have been scheduled on a roughly bi-yearly basis since 1969 to provide a forum for researchers and practitioners to meet and exchange their latest methods and findings related to the testing and design of composite materials and structures."
Download or read book Mechanics of Solid Polymers written by Jorgen S Bergstrom and published by William Andrew. This book was released on 2015-07-11 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very few polymer mechanics problems are solved with only pen and paper today, and virtually all academic research and industrial work relies heavily on finite element simulations and specialized computer software. Introducing and demonstrating the utility of computational tools and simulations, Mechanics of Solid Polymers provides a modern view of how solid polymers behave, how they can be experimentally characterized, and how to predict their behavior in different load environments. Reflecting the significant progress made in the understanding of polymer behaviour over the last two decades, this book will discuss recent developments and compare them to classical theories. The book shows how best to make use of commercially available finite element software to solve polymer mechanics problems, introducing readers to the current state of the art in predicting failure using a combination of experiment and computational techniques. Case studies and example Matlab code are also included. As industry and academia are increasingly reliant on advanced computational mechanics software to implement sophisticated constitutive models – and authoritative information is hard to find in one place - this book provides engineers with what they need to know to make best use of the technology available. - Helps professionals deploy the latest experimental polymer testing methods to assess suitability for applications - Discusses material models for different polymer types - Shows how to best make use of available finite element software to model polymer behaviour, and includes case studies and example code to help engineers and researchers apply it to their work
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation Kinetics written by A. S. Krausz and published by Wiley-Interscience. This book was released on 1975 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Mechanics of Composite Materials written by Isaac M. Daniel and published by . This book was released on 2007 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Glasses written by Connie B. Roth and published by CRC Press. This book was released on 2016-12-12 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: "the present book will be of great value for both newcomers to the field and mature active researchers by serving as a coherent and timely introduction to some of the modern approaches, ideas, results, emerging understanding, and many open questions in this fascinating field of polymer glasses, supercooled liquids, and thin films" –Kenneth S. Schweizer, Morris Professor of Materials Science & Engineering, University of Illinois at Urbana-Champaign (from the Foreword) This book provides a timely and comprehensive overview of molecular level insights into polymer glasses in confined geometries and under deformation. Polymer glasses have become ubiquitous to our daily life, from the polycarbonate eyeglass lenses on the end of our nose to large acrylic glass panes holding water in aquarium tanks, with advantages over glass in that they are lightweight and easy to manufacture, while remaining transparent and rigid. The contents include an introduction to the field, as well as state of the art investigations. Chapters delve into studies of commonalities across different types of glass formers (polymers, small molecules, colloids, and granular materials), which have enabled microscopic and molecular level frameworks to be developed. The authors show how glass formers are modeled across different systems, thereby leading to treatments for polymer glasses with first-principle based approaches and molecular level detail. Readers across disciplines will benefit from this topical overview summarizing the key areas of polymer glasses, alongside an introduction to the main principles and approaches.
Download or read book Theory of Viscoelasticity written by R. M. Christensen and published by Courier Corporation. This book was released on 2013-04-26 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integration of theoretical developments offers complete description of linear theory of viscoelastic behavior of materials, with theoretical formulations derived from continuum mechanics viewpoint and discussions of problem solving. 1982 edition.
Download or read book Dynamic Behavior of Materials Volume 1 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-27 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Download or read book Micromechanics of Composite Materials written by Jacob Aboudi and published by Butterworth-Heinemann. This book was released on 2013 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: A Generalized Multiscale Analysis Approach brings together comprehensive background information on the multiscale nature of the composite, constituent material behaviour, damage models and key techniques for multiscale modelling, as well as presenting the findings and methods, developed over a lifetime's research, of three leading experts in the field. The unified approach presented in the book for conducting multiscale analysis and design of conventional and smart composite materials is also applicable for structures with complete linear and nonlinear material behavior, with numerous applications provided to illustrate use. Modeling composite behaviour is a key challenge in research and industry; when done efficiently and reliably it can save money, decrease time to market with new innovations and prevent component failure.
Download or read book Incorporation of Mean Stress Effects Into the Micromechanical Analysis of the High Strain Rate Response of Polymer Matrix Composites written by and published by . This book was released on 2002 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young Kwon and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.
