Download or read book Computational Nonlinear Mechanics in Aerospace Engineering written by Satya N. Atluri and published by AIAA. This book was released on 1992 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Mechanics for Composite Heterogeneous Structures written by Georgios A. Drosopoulos and published by CRC Press. This book was released on 2022-04-26 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Mechanics for Composite Heterogeneous Structures applies both classical and multi-scale finite element analysis to the non-linear, failure response of composite structures. These traditional and modern computational approaches are holistically presented, providing insight into a range of non-linear structural analysis problems. The classical methods include geometric and material non-linearity, plasticity, damage and contact mechanics. The cutting-edge formulations include cohesive zone models, the Extended Finite Element Method (XFEM), multi-scale computational homogenization, localization of damage, neural networks and data-driven techniques. This presentation is simple but efficient, enabling the reader to understand, select and apply appropriate methods through programming code or commercial finite element software. The book is suitable for undergraduate studies as a final year textbook and for MSc and PhD studies in structural, mechanical, aerospace engineering and material science, among others. Professionals in these fields will also be strongly benefited. An accompanying website provides MATLAB codes for two-dimensional finite element problems with contact, multi-scale (FE2) and non-linear XFEM analysis, data-driven and machine learning simulations.

Download or read book Computational Methods for Nonlinear Dynamical Systems written by 汪雪川 and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Computational Nonlinear Mechanics written by I.S. Doltsinis and published by Springer. This book was released on 2014-05-04 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced computational methods in nonlinear mechanics of solids and fluids are dealt with in this volume. Contributions consider large deformations of structures and solids, problems in nonlinear dynamics, aspects of earthquake analysis, coupled problems, convection-dominated phenomena, and compressible and incompressible viscous flows. Selected applications indicate the relevance of the analysis to the demands of industry and science. The contributors are from research institutions well-known for their work in this field.

Download or read book Nonlinear Solid Mechanics written by Gerhard A. Holzapfel and published by . This book was released on 2000-04-06 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a modern and comprehensive coverage of continuum mechanics, this volume includes information on "variational principles"--Significant, as this is the only method by which such material is actually utilized in engineering practice.

Download or read book Recent Advances in Computational and Experimental Mechanics Vol II written by D. K. Maiti and published by Springer Nature. This book was released on 2022-02-26 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.

Download or read book Recent Advances in Computational Mechanics and Simulations written by Sandip Kumar Saha and published by Springer Nature. This book was released on 2020-11-13 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents selected papers from the 7th International Congress on Computational Mechanics and Simulation held at IIT Mandi, India. The papers discuss the development of mathematical models representing physical phenomena and applying modern computing methods and simulations to analyse them. The studies cover recent advances in the fields of nano mechanics and biomechanics, simulations of multiscale and multiphysics problems, developments in solid mechanics and finite element method, advancements in computational fluid dynamics and transport phenomena, and applications of computational mechanics and techniques in emerging areas. The volume will be of interest to researchers and academics from civil engineering, mechanical engineering, aerospace engineering, materials engineering/science, physics, mathematics and other disciplines.

Download or read book Nonlinear Solid Mechanics written by Gerhard A. Holzapfel and published by . This book was released on 2000-04-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a modern and comprehensive coverage of continuum mechanics, this volume includes information on "variational principles"--Significant, as this is the only method by which such material is actually utilized in engineering practice.

Download or read book Computational Approaches for Aerospace Design written by Andy Keane and published by John Wiley & Sons. This book was released on 2005-08-05 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last fifty years, the ability to carry out analysis as a precursor to decision making in engineering design has increased dramatically. In particular, the advent of modern computing systems and the development of advanced numerical methods have made computational modelling a vital tool for producing optimized designs. This text explores how computer-aided analysis has revolutionized aerospace engineering, providing a comprehensive coverage of the latest technologies underpinning advanced computational design. Worked case studies and over 500 references to the primary research literature allow the reader to gain a full understanding of the technology, giving a valuable insight into the world’s most complex engineering systems. Key Features: Includes background information on the history of aerospace design and established optimization, geometrical and mathematical modelling techniques, setting recent engineering developments in a relevant context. Examines the latest methods such as evolutionary and response surface based optimization, adjoint and numerically differentiated sensitivity codes, uncertainty analysis, and concurrent systems integration schemes using grid-based computing. Methods are illustrated with real-world applications of structural statics, dynamics and fluid mechanics to satellite, aircraft and aero-engine design problems. Senior undergraduate and postgraduate engineering students taking courses in aerospace, vehicle and engine design will find this a valuable resource. It will also be useful for practising engineers and researchers working on computational approaches to design.

Download or read book Applied Nonlinear Dynamics written by Ali Hasan Nayfeh and published by Wiley Vch. This book was released on 1995 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unified and coherent treatment of analytical, computational and experimental techniques of nonlinear dynamics with numerous illustrative applications. Features a discourse on geometric concepts such as Poincaré maps. Discusses chaos, stability and bifurcation analysis for systems of differential and algebraic equations. Includes scores of examples to facilitate understanding.

Download or read book Computational Methods for Nonlinear Dynamical Systems written by Xuechuan Wang and published by Elsevier. This book was released on 2022-09-28 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for Nonlinear Dynamical Systems: Theory and Applications in Aerospace Engineering proposes novel ideas and develops highly-efficient and accurate methods for solving nonlinear dynamic systems, drawing inspiration from the weighted residual method and the asymptotic method. Proposed methods can be used both for real-time simulation and the analysis of nonlinear dynamics in aerospace engineering. The book introduces global estimation methods and local computational methods for nonlinear dynamic systems. Starting from the classic asymptotic, finite difference and weighted residual methods, typical methods for solving nonlinear dynamic systems are considered. In addition, new high-performance methods are proposed, such as time-domain collocation and local variational iteration. The book summarizes and develops computational methods for strongly nonlinear dynamic systems and considers the practical application of the methods within aerospace engineering. Presents global methods for solving periodic nonlinear dynamical behaviors Gives local methods for solving transient nonlinear responses Outlines computational methods for linear, nonlinear, ordinary and partial differential equations Emphasizes the development of accurate and efficient numerical methods that can be used in real-world missions Reveals practical applications of methods through orbital mechanics and structural dynamics

Download or read book Advances in Computational Nonlinear Mechanics written by I. S. Doltsinis and published by . This book was released on 2014-09-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Computational and Experimental Mechanics Vol I written by D. Maity and published by Springer Nature. This book was released on 2022-01-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. - I) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.

Download or read book Nonlinear Continuum Mechanics written by Carlos Agelet de Saracibar and published by Springer Nature. This book was released on 2023-08-22 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook on Continuum Mechanics presents 9 chapters. Chapters 1 and 2 are devoted to Tensor Algebra and Tensor Analysis. Part I of the book includes the next 3 chapters. All the content here is valid for both solid and fluid materials. At the end of Part I, the reader should be able to set up in local spatial/material form, the fundamental governing equations and inequalities for a Continuum Mechanics problem. Part II of the book, Chapters 6 to 10, is devoted to presenting some nonlinear constitutive models for Nonlinear Solid Mechanics, including Finite Deformation Hyperelasticity, Finite Deformation Plasticity, Finite Deformation Coupled Thermoplasticity, and Finite Deformation Contact Mechanics. The constitutive equations are derived within a thermodynamically consistent framework. Finite deformation elastoplasticity models are based on a multiplicative decomposition of the deformation gradient and the notion of an intermediate configuration. Different formulations based on the intermediate configuration, the current or spatial configuration, and the material configuration are considered. The last chapter is devoted to Variational Methods in Solid Mechanics, a fundamental topic in Computational Mechanics. The book may be used as a textbook for an advanced Master’s course on Nonlinear Continuum Mechanics for graduate students in Civil, Mechanical or Aerospace Engineering, Applied Mathematics, or Applied Physics, with an interest in Continuum Mechanics and Computational Mechanics.

Download or read book Advances in Nonlinear Dynamics Methods and Applications written by Anil K. Bajaj and published by Springer. This book was released on 2011-09-27 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second and final issue of the collection of papers that were contributed by friends and colleagues of (Late) Professor P. R. "Pat" Sethna of the University of Minnesota to commemorate his 70th birthday on May 26, 1993. The first set of contributions was published in Nonlinear Dynamics as the last issue (no. 6) of Vol. 4 in 1993. As circumstances would have it, Professor Sethna was diagnosed with cancer in the fall of 1992 and, after an extended battle with the disease, he passed away on November 4, 1993, just a few days before the first set of contributed papers appeared in print. It is gratifying to report that the organizers of these vi Foreword commemorative issues in Nonlinear Dynamics were able to present to Professor Sethna, on the occasion of his 70th birthday, complete details of the planned commemorative issues. This second set of contributions is dedicated, in memoriam, to Professor P. R. Sethna. As many of you are well aware, Professor Sethna was an active researcher in the field of nonlinear vibrations and dynamics for nearly forty years, making many fundamental and significant contributions to both the theoretical and applied aspects of this field. He was also recognized for his outstanding leadership and administrative abilities, amply demonstrated through his position as the Head of the Department of Aerospace Engineering and Mechanics at the University of Minnesota for twenty-six years (1966-1992).

Download or read book Linear and Nonlinear Instabilities in Mechanical Systems written by Hiroshi Yabuno and published by John Wiley & Sons. This book was released on 2021-02-16 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: LINEAR and NONLINEAR INSTABILITIES in MECHANICAL SYSTEMS An in-depth insight into nonlinear analysis and control As mechanical systems become lighter, faster, and more flexible, various nonlinear instability phenomena can occur in practical systems. The fundamental knowledge of nonlinear analysis and control is essential to engineers for analysing and controlling nonlinear instability phenomena. This book bridges the gap between the mathematical expressions of nonlinear dynamics and the corresponding practical phenomena. Linear and Nonlinear Instabilities in Mechanical Systems: Analysis, Control and Application provides a detailed and informed insight into the fundamental methods for analysis and control for nonlinear instabilities from the practical point of view. Key features: Refers to the behaviours of practical mechanical systems such as aircraft, railway vehicle, robot manipulator, micro/nano sensor Enhances the rigorous and practical understanding of mathematical methods from an engineering point of view The theoretical results obtained by nonlinear analysis are interpreted by using accompanying videos on the real nonlinear behaviors of nonlinear mechanical systems Linear and Nonlinear Instabilities in Mechanical Systems is an essential textbook for students on engineering courses, and can also be used for self-study or reference by engineers.

Download or read book Research Directions in Computational Mechanics written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational mechanics is a scientific discipline that marries physics, computers, and mathematics to emulate natural physical phenomena. It is a technology that allows scientists to study and predict the performance of various productsâ€"important for research and development in the industrialized world. This book describes current trends and future research directions in computational mechanics in areas where gaps exist in current knowledge and where major advances are crucial to continued technological developments in the United States.