Download or read book Computational Modeling of Issues in Materials Science written by H. Dreyssé and published by Elsevier Science Limited. This book was released on 1998-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium D, entitled Computational Modeling of Issues in Materials Science was presented at the combined 1997 International Conference on Applied Materials/European Materials Research Society Spring meeting (ICAM'97/E-MRS'97) held in Strasbourg (France) from 16-20 June 1997. Those who attended came from all five continents with participants coming from as far away as South Africa, Australia and Eastern Europe. There were 14 invited talks, 54 contributed papers, and 62 posters presented at the symposium. Computational materials science has truly emerged as a field in itself. The range of phenomena studied and the variety of techniques used indicate that the subject has sufficiently matured that technologically relevant information can now be routinely extracted from computational modeling. These models increasingly use atomistic information from which macroscopic parameters may be determined. Several papers showed that parallel computers will play a major role in the further development of the field. The Car-Parrinello method emerged as a workhorse for the most advanced simulations which the advent of faster hardware and diffusion of computer codes has brought within easy reach of many research groups. How to consistently go from the micro- to the macro-scale remains one of the great unsolved puzzles in computational materials science and was the subject of much discussion at the symposium. The interdisciplinary side of computational studies of matter was demonstrated in several talks, where authors borrowed methods from nuclear physics, fluid dynamics, and other subjects. This was a very productive symposium with new collaborations started, many novel ideas generated and a large amount of information disseminated. The meeting gave an excellent idea of the status of computational materials service anno 1997.
Download or read book Introduction to Computational Materials Science written by Richard LeSar and published by Cambridge University Press. This book was released on 2013-03-28 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasising essential methods and universal principles, this textbook provides everything students need to understand the basics of simulating materials behaviour. All the key topics are covered from electronic structure methods to microstructural evolution, appendices provide crucial background material, and a wealth of practical resources are available online to complete the teaching package. Modelling is examined at a broad range of scales, from the atomic to the mesoscale, providing students with a solid foundation for future study and research. Detailed, accessible explanations of the fundamental equations underpinning materials modelling are presented, including a full chapter summarising essential mathematical background. Extensive appendices, including essential background on classical and quantum mechanics, electrostatics, statistical thermodynamics and linear elasticity, provide the background necessary to fully engage with the fundamentals of computational modelling. Exercises, worked examples, computer codes and discussions of practical implementations methods are all provided online giving students the hands-on experience they need.
Download or read book Applied Computational Materials Modeling written by Guillermo Bozzolo and published by Springer Science & Business Media. This book was released on 2007-12-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this book is to identify and emphasize the successful link between computational materials modeling as a simulation and design tool and its synergistic application to experimental research and alloy development. The book provides a more balanced perspective of the role that computational modeling can play in every day research and development efforts. Each chapter describes one or more particular computational tool and how they are best used.
Download or read book Computational Modeling of Issues in Materials Science written by Hugues Dreyssé and published by . This book was released on 1998 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Materials Science written by Dierk Raabe and published by Wiley-VCH. This book was released on 1998-10-27 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and simulation play an ever increasing role in the development and optimization of materials. Computational Materials Science presents the most important approaches in this new interdisciplinary field of materials science and engineering. The reader will learn to assess which numerical method is appropriate for performing simulations at the various microstructural levels and how they can be coupled. This book addresses graduate students and professionals in materials science and engineering as well as materials-oriented physicists and mechanical engineers.
Download or read book Computational Modeling of Issues in Materials Science written by Hugues Dreyssé and published by . This book was released on 1998 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Topics in Computational Materials Science written by Ching-yao Fong and published by World Scientific. This book was released on 1998 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state-of-the-art research topics in theoretical materials science. It encompasses the computational methods and techniques which can advance more realistic calculations for understanding the physical principles in new growth methods of optoelectronic materials and related surface problems. These principles also govern the photonic, electronic, and structural properties of materials which are essential for device applications. They will also provide the crucial ingredients for the growth of future novel materials.
Download or read book Computational Materials Science written by A.M. Ovrutsky and published by Elsevier. This book was released on 2013-11-19 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Materials Science provides the theoretical basis necessary for understanding atomic surface phenomena and processes of phase transitions, especially crystallization, is given. The most important information concerning computer simulation by different methods and simulation techniques for modeling of physical systems is also presented. A number of results are discussed regarding modern studies of surface processes during crystallization. There is sufficiently full information on experiments, theory, and simulations concerning the surface roughening transition, kinetic roughening, nucleation kinetics, stability of crystal shapes, thin film formation, imperfect structure of small crystals, size dependent growth velocity, distribution coefficient at growth from alloy melts, superstructure ordering in the intermetallic compound. Computational experiments described in the last chapter allow visualization of the course of many processes and better understanding of many key problems in Materials Science. There is a set of practical steps concerning computational procedures presented. Open access to executable files in the book make it possible for everyone to understand better phenomena and processes described in the book. Valuable reference book, but also helpful as a supplement to courses Computer programs available to supplement examples Presents several new methods of computational materials science and clearly summarizes previous methods and results
Download or read book Computer Simulation in Materials Science written by M. Meyer and published by Springer. This book was released on 1991-09-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Aussois, France, March 25-April 5, 1991
Download or read book Computational Materials Science written by June Gunn Lee and published by CRC Press. This book was released on 2016-11-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the essentials of Computational Science and gives tools and techniques to solve materials science problems using molecular dynamics (MD) and first-principles methods. The new edition expands upon the density functional theory (DFT) and how the original DFT has advanced to a more accurate level by GGA+U and hybrid-functional methods. It offers 14 new worked examples in the LAMMPS, Quantum Espresso, VASP and MedeA-VASP programs, including computation of stress-strain behavior of Si-CNT composite, mean-squared displacement (MSD) of ZrO2-Y2O3, band structure and phonon spectra of silicon, and Mo-S battery system. It discusses methods once considered too expensive but that are now cost-effective. New examples also include various post-processed results using VESTA, VMD, VTST, and MedeA.
Download or read book Computational Materials Engineering written by Koenraad George Frans Janssens and published by Academic Press. This book was released on 2010-07-26 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Materials Engineering is an advanced introduction to the computer-aided modeling of essential material properties and behavior, including the physical, thermal and chemical parameters, as well as the mathematical tools used to perform simulations. Its emphasis will be on crystalline materials, which includes all metals. The basis of Computational Materials Engineering allows scientists and engineers to create virtual simulations of material behavior and properties, to better understand how a particular material works and performs and then use that knowledge to design improvements for particular material applications. The text displays knowledge of software designers, materials scientists and engineers, and those involved in materials applications like mechanical engineers, civil engineers, electrical engineers, and chemical engineers. Readers from students to practicing engineers to materials research scientists will find in this book a single source of the major elements that make up contemporary computer modeling of materials characteristics and behavior. The reader will gain an understanding of the underlying statistical and analytical tools that are the basis for modeling complex material interactions, including an understanding of computational thermodynamics and molecular kinetics; as well as various modeling systems. Finally, the book will offer the reader a variety of algorithms to use in solving typical modeling problems so that the theory presented herein can be put to real-world use. Balanced coverage of fundamentals of materials modeling, as well as more advanced aspects of modeling, such as modeling at all scales from the atomic to the molecular to the macro-material Concise, yet rigorous mathematical coverage of such analytical tools as the Potts type Monte Carlo method, cellular automata, phase field, dislocation dynamics and Finite Element Analysis in statistical and analytical modeling
Download or read book Computational Modeling Optimization and Manufacturing Simulation of Advanced Engineering Materials written by Pablo Andrés Muñoz-Rojas and published by Springer. This book was released on 2016-06-20 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents recent research work focused in the development of adequate theoretical and numerical formulations to describe the behavior of advanced engineering materials. Particular emphasis is devoted to applications in the fields of biological tissues, phase changing and porous materials, polymers and to micro/nano scale modeling. Sensitivity analysis, gradient and non-gradient based optimization procedures are involved in many of the chapters, aiming at the solution of constitutive inverse problems and parameter identification. All these relevant topics are exposed by experienced international and inter institutional research teams resulting in a high level compilation. The book is a valuable research reference for scientists, senior undergraduate and graduate students, as well as for engineers acting in the area of computational material modeling.
Download or read book Computational Materials Science written by Kaoru Ohno and published by Springer. This book was released on 2018-04-14 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces modern techniques based on computer simulation to study materials science. It starts from first principles calculations enabling to calculate the physical and chemical properties by solving a many-body Schroedinger equation with Coulomb forces. For the exchange-correlation term, the local density approximation is usually applied. After the introduction of the first principles treatment, tight-binding and classical potential methods are briefly introduced to indicate how one can increase the number of atoms in the system. In the second half of the book, Monte Carlo simulation is discussed in detail. Problems and solutions are provided to facilitate understanding. Readers will gain sufficient knowledge to begin theoretical studies in modern materials research. This second edition includes a lot of recent theoretical techniques in materials research. With the computers power now available, it is possible to use these numerical techniques to study various physical and chemical properties of complex materials from first principles. The new edition also covers empirical methods, such as tight-binding and molecular dynamics.
Download or read book Computational Problems in Science and Engineering written by Nikos Mastorakis and published by Springer. This book was released on 2015-10-26 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with modern computational techniques for solving variety of problems from electrical, mechanical, civil and chemical engineering. Mathematical methods are presented in a unified manner, so they can be applied consistently to problems in applied electromagnetics, strength of materials, fluid mechanics, heat and mass transfer, environmental engineering, biomedical engineering, signal processing, automatic control and more.
Download or read book Research Directions in Computational Mechanics written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational mechanics is a scientific discipline that marries physics, computers, and mathematics to emulate natural physical phenomena. It is a technology that allows scientists to study and predict the performance of various productsâ€"important for research and development in the industrialized world. This book describes current trends and future research directions in computational mechanics in areas where gaps exist in current knowledge and where major advances are crucial to continued technological developments in the United States.
Download or read book Computational Methods of Multi Physics Problems written by Timon Rabczuk and published by MDPI. This book was released on 2019-08-20 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of six papers addressing problems associated with the computational modeling of multi-field problems. Some of the proposed contributions present novel computational techniques, while other topics focus on applying state-of-the-art techniques in order to solve coupled problems in various areas including the prediction of material failure during the lithiation process, which is of major importance in batteries; efficient models for flexoelectricity, which require higher-order continuity; the prediction of composite pipes under thermomechanical conditions; material failure in rock; and computational materials design. The latter exploits nano-scale modeling in order to predict various material properties for two-dimensional materials with applications in, for example, semiconductors. In summary, this book provides a good overview of the computational modeling of different multi-field problems.
Download or read book Introduction to Computational Materials Science written by Richard LeSar and published by . This book was released on 2013 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasising essential methods and universal principles, this textbook provides everything students need to understand the basics of simulating materials behavior. All the key topics are covered from electronic structure methods to microstructural evolution, appendices provide crucial background material, and a wealth of practical resources are available online to complete the teaching package. Modeling is examined at a broad range of scales, from the atomic to the mesoscale, providing students with a solid foundation for future study and research. Detailed, accessible explanations of the fundamental equations underpinning materials modelling are presented, including a full chapter summarising essential mathematical background. Extensive appendices, including essential background on classical and quantum mechanics, electrostatics, statistical thermodynamics and linear elasticity, provide the background necessary to fully engage with the fundamentals of computational modelling. Exercises, worked examples, computer codes and discussions of practical implementations methods are all provided online giving students the hands-on experience they need.