Download or read book Computation and Control II written by Kenneth L. Bowers and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of papers delivered by the partici pants at the second Conference on Computation and Control held at Mon tana State University in Bozeman, Montana from August 1-7, 1990. The conference, as well as this proceedings, attests to the vitality and cohesion between the control theorist and the numerical analyst that was adver tised by the first Conference on Computation and Control in 1988. The proceedings of that initial conference was published by Birkhiiuser Boston as the first volume of this same series entitled Computation and Control, Proceedings of the Bozeman Conference, Bozeman, Montana, 1988. Control theory and numerical analysis are both, by their very nature, interdisciplinary subjects as evidenced by their interaction with other fields of mathematics and engineering. While it is clear that new control or es timation algorithms and new feedback design methodologies will need to be implemented computationally, it is likewise clear that new problems in computational mathematics arise when implementing a new generation of control algorithms. For these reasons, computational mathematics is mov ing to the forefront in recent developments in modern control theory and conversely control theory and its applications continue to be a fertile area for computationalists. This volume contains a representative cross section of the interdisciplinary blend of analytic and numerical techniques that of ten occur between advanced control design and practical numerical solution of lumped and distributed parameter systems.

Download or read book Guidance and Control II written by Robert Langford and published by Elsevier. This book was released on 2012-12-02 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidance and Control - II focuses on the techniques and processes involved relative to the control of rockets, missiles, and other space vehicles. Divided into seven parts with 36 chapters, the book focuses first on active and passive control for space vehicles; advances in attitude control; the stabilization of earth satellites; and the theoretical and practical considerations of solar pressure attitude control for interplanetary space vehicles. The compilation also notes the use of gyrostabilizers on satellites, including the use of two-pulse attitude control and bank angle control for an asymmetric spinning satellite. Experiments on gyro rotor imbalance on a stable platform and various navigation and guidance systems are also presented. The book also looks at the use of sensors, the stellar techniques for interplanetary flights, and control of space vehicles. The text also gives emphasis on various mathematical equations used to measure fuel optimization in orbital rendezvous. Guidance techniques in lunar landing are also discussed. The compilation is important for readers interested in studying the methods, principles, and processes involved in the control of space vehicles.

Download or read book Computation and Control III written by Kenneth L. Bowers and published by Springer Science & Business Media. This book was released on 1993 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third Conference on Computation and Control was held at Montana State University in Bozeman, Montana from August 5-11, 1992, and this contains a collection of papers addressing issues including noise abatement via smart material technology, robotic vision and parameter identification.

Download or read book Computation and Control II written by Kenneth L. Bowers and published by . This book was released on 1991-01-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computation and Control II written by Kenneth L. Bowers and published by . This book was released on 2014-09-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Optimal Control written by Roland Bulirsch and published by Birkhäuser. This book was released on 2012-12-06 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resources should be used sparingly both from a point of view of economy and eco logy. Thus in controlling industrial, economical and social processes, optimization is the tool of choice. In this area of applied numerical analysis, the INTERNATIONAL FEDERATION OF AUTOMATIC CONTROL (IFAC) acts as a link between research groups in universities, national research laboratories and industry. For this pur pose, the technical committee Mathematics of Control of IFAC organizes biennial conferences with the objective of bringing together experts to exchange ideas, ex periences and future developments in control applications of optimization. There should be a genuine feedback loop between mathematicians, computer scientists, engineers and software developers. This loop should include the design, application and implementation of algorithms. The contributions of industrial practitioners are especially important. These proceedings contain selected papers from a workshop on CONTROL Ap PLICATIONS OF OPTIMIZATION, which took place at the Fachhochschule Miinchen in September 1992. The workshop was the ninth in a series of very successful bien nial meetings, starting with the Joint Automatic Control Conference in Denver in 1978 and followed by conferences in London, Oberpfaffenhofen, San Francisco, Ca pri, Tbilisi and Paris. The workshop was attended by ninety researchers from four continents. This volume represents the state of the art in the field, with emphasis on progress made since the publication of the proceedings of the Capri meeting, edited by G. di Pillo under the title 'Control Applications of Optimization and Nonlinear Programming'.

Download or read book Computer Based Industrial Control 2 e written by Kant and published by PHI Learning Pvt. Ltd.. This book was released on 2011-07-30 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second edition, this text presents the fundamentals of computer-based control of industrial processes. Intended primarily for undergraduate and postgraduate students of instrumentation and electronics engineering, the book will also be useful for professionals and researchers in these fields.

Download or read book Principles of Computer System Design written by Jerome H. Saltzer and published by Morgan Kaufmann. This book was released on 2009-05-21 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Computer System Design is the first textbook to take a principles-based approach to the computer system design. It identifies, examines, and illustrates fundamental concepts in computer system design that are common across operating systems, networks, database systems, distributed systems, programming languages, software engineering, security, fault tolerance, and architecture. Through carefully analyzed case studies from each of these disciplines, it demonstrates how to apply these concepts to tackle practical system design problems. To support the focus on design, the text identifies and explains abstractions that have proven successful in practice such as remote procedure call, client/service organization, file systems, data integrity, consistency, and authenticated messages. Most computer systems are built using a handful of such abstractions. The text describes how these abstractions are implemented, demonstrates how they are used in different systems, and prepares the reader to apply them in future designs. The book is recommended for junior and senior undergraduate students in Operating Systems, Distributed Systems, Distributed Operating Systems and/or Computer Systems Design courses; and professional computer systems designers. Concepts of computer system design guided by fundamental principles Cross-cutting approach that identifies abstractions common to networking, operating systems, transaction systems, distributed systems, architecture, and software engineering Case studies that make the abstractions real: naming (DNS and the URL); file systems (the UNIX file system); clients and services (NFS); virtualization (virtual machines); scheduling (disk arms); security (TLS) Numerous pseudocode fragments that provide concrete examples of abstract concepts Extensive support. The authors and MIT OpenCourseWare provide on-line, free of charge, open educational resources, including additional chapters, course syllabi, board layouts and slides, lecture videos, and an archive of lecture schedules, class assignments, and design projects

Download or read book Active Flow Control II written by Rudibert King and published by Springer Science & Business Media. This book was released on 2010-04-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest in the field of active flow control (AFC) is steadily increasing. In - cent years the number of conferences and special sessions devoted to AFC org- ized by various institutions around the world continuously rises. New advanced courses for AFC are offered by the American Institute of Aeronautics and Ast- nautics (AIAA), the European Research Community on Flow, Turbulence and Combustion (ERCOFTAC), the International Centre for Mechanical Sciences (CISM), the von Karman Institute for Fluid Dynamics (VKI), to name just a few. New books on AFC are published by prominent colleagues of our field and even a new periodical, the ‘International Journal of Flow Control’, appeared. Despite these many activities in AFC it was felt that a follow-up of the highly successful ‘ACTIVE FLOW CONTROL’ Conference held in Berlin in 2006 was appropriate. As in 2006, ‘ACTIVE FLOW CONTROL II’ consisted only of invited lectures. To sti- late multidisciplinary discussions between experimental, theoretical and numerical fluid dynamics, aerodynamics, turbomachinary, mathematics, control engineering, metrology and computer science parallel sessions were excluded. Unfortunately, not all of the presented papers made it into this volume. As the preparation and printing of a book takes time and as this volume should be available at the conf- ence, the Local Organizing Committee had to set up a very ambitious time sch- ule which could not be met by all contributors.

Download or read book Sinc Methods for Quadrature and Differential Equations written by John Lund and published by SIAM. This book was released on 1992-01-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is an elementary development of the Sinc-Galerkin method with the focal point being ordinary and partial differential equations. This is the first book to explain this powerful computational method for treating differential equations. These methods are an alternative to finite difference and finite element schemes, and are especially adaptable to problems with singular solutions. The text is written to facilitate easy implementation of the theory into operating numerical code. The authors' use of differential equations as a backdrop for the presentation of the material allows them to present a number of the applications of the sinc method. Many of these applications are useful in numerical processes of interest quite independent of differential equations. Specifically, numerical interpolation and quadrature, while fundamental to the Galerkin development, are useful in their own right.

Download or read book Languages and Compilers for Parallel Computing written by Keith Cooper and published by Springer Science & Business Media. This book was released on 2011-03-07 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 23rd International Workshop on Languages and Compilers for Parallel Computing, LCPC 2010, held in Houston, TX, USA, in October 2010. The 18 revised full papers presented were carefully reviewed and selected from 47 submissions. The scope of the workshop spans foundational results and practical experience, and targets all classes of parallel platforms in- cluding concurrent, multithreaded, multicore, accelerated, multiprocessor, and cluster systems.

Download or read book Trust and Trustworthy Computing written by Alessandro Acquisti and published by Springer. This book was released on 2010-06-29 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the Third International Conference on Trust and Trustworthy Computing (TRUST), held at the Ritz-Carlton hotel in Berlin, Germany, June 21–23, 2010. TRUST is a rapidly growing forum for research on the technical and soc- economic aspects of trustworthy infrastructures. TRUST provides an interdis- plinary forum for researchers, practitioners, and decision makers to explore new ideas and discuss experiences in building, designing, using, and understanding trustworthy computing systems. The third edition of TRUST welcomed manuscripts in two di?erent tracks: a Technical Strand and a Socio-economic Strand. We assembled an engaging program with 21 peer-reviewed technical papers and nine peer-reviewed soc- economic papers; eight keynotes from industry, academia, and government; and panel discussions on privacy and standards. In addition, this year, TRUST was co-located with four workshops: Trust in Cloud, Hardware Security, Emerging and Future Risks, and Anonymous Signatures. We would like to thank numerous individuals for their e?ort and contri- tion to the conference and for making TRUST 2010 possible: the Organizing Committee members—Nadine Palacios and Marcel Winandy—for their trem- dous help with all aspects of the organization;the Technicaland Socio-economic Program Committee members, whose names are listed on the following pages, together with the names of external reviewers who helped us in the process of selecting manuscripts to be included in the conference proceedings; the keynote and invited speakers; and the invited panel speakers.

Download or read book Resilience Assessment and Evaluation of Computing Systems written by Katinka Wolter and published by Springer Science & Business Media. This book was released on 2012-11-02 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: The resilience of computing systems includes their dependability as well as their fault tolerance and security. It defines the ability of a computing system to perform properly in the presence of various kinds of disturbances and to recover from any service degradation. These properties are immensely important in a world where many aspects of our daily life depend on the correct, reliable and secure operation of often large-scale distributed computing systems. Wolter and her co-editors grouped the 20 chapters from leading researchers into seven parts: an introduction and motivating examples, modeling techniques, model-driven prediction, measurement and metrics, testing techniques, case studies, and conclusions. The core is formed by 12 technical papers, which are framed by motivating real-world examples and case studies, thus illustrating the necessity and the application of the presented methods. While the technical chapters are independent of each other and can be read in any order, the reader will benefit more from the case studies if he or she reads them together with the related techniques. The papers combine topics like modeling, benchmarking, testing, performance evaluation, and dependability, and aim at academic and industrial researchers in these areas as well as graduate students and lecturers in related fields. In this volume, they will find a comprehensive overview of the state of the art in a field of continuously growing practical importance.

Download or read book International Taxation of Cloud Computing written by Alexander Weisser and published by Éditions juridiques libres / Freier juristischer Verlag. This book was released on 2020-10-07 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cloud computing may be borderless, but taxes are territorial. It is easy to imagine how the two concepts can clash. Much effort has gone into harmonizing tax rules across borders with the result that many jurisdictions have very similar tax rules. Even so, taxation remains a basic expression of national sovereignty. The goal of this thesis is to examine how international tax law applies to the cross-border cloud computing business. Both, multinational providers and customers of cloud computing services are analyzed. Reflecting three traditional areas of international tax scholarship, the goal could be stated in three questions. Which jurisdictions have the right to tax? What kinds of cloud computing transactions can be taxed? What amount of the profit is taxable? In more technical terms, this means enquiring into how the use of cloud computing affects the permanent establishment status of taxpayers, how the different kinds of cloud computing transactions are characterized under international double taxation treaties, and how the calculation of taxable cloud computing profit is affected by transfer pricing. In light of the current political events, the thesis also offers recommendations de lege lata through a systematic approach. Its first part assesses the current taxation of cloud computing. The second part evaluates whether the findings of this initial assessment conform to various superior principles of good rulemaking. It identifies which of the present tax rules ought to be adapted. The final part considers how the rules could be amended to become more compliant with the superior principles. In this way, Part I embodies the thesis, Part II the antithesis, and Part III seeks a synthesis.

Download or read book Methodologies For The Conception Design And Application Of Soft Computing Proceedings Of The 5th International Conference On Soft Computing And Information intelligent Systems In 2 Volumes written by Gen Matsumoto and published by World Scientific. This book was released on 1998-08-25 with total page 1119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft computing is the common name for a certain form of natural information processing that has its original form in biology, especially in the function of human brain. It is a discipline rooted in a group of technologies such as fuzzy logic, neural networks, chaos, genetic algorithms, probabilistic reasoning and learning algorithms. Today, soft computing has become an acknowledged concept; however, for a long time, such components of soft computing have been debated and individually developed.Since its beginning in 1990, the series of IIZUKA conferences has covered various kinds of technologies that constitute soft computing. This series has played a pioneering role in promoting the development of a symbiotic relationship between the various technologies of soft computing.At IIZUKA'98, the 5th International Conference on Soft Computing and Information/Intelligent Systems, new developments and results in this field were introduced and discussed by researchers from academic, governmental and industrial institutions around the world.This volume presents the opening lecture by Prof. Walter J Freeman, the keynote speech by Dr Gen Matsumoto, the plenary lectures by 5 eminent researchers and about 230 carefully selected papers drawn from more than 25 countries. It documents current research and in-depth studies on the fundamental aspects of soft computing and their practical applications.

Download or read book PARALLEL AND DISTRIBUTED COMPUTING ARCHITECTURES AND ALGORITHMS written by BASU, S. K. and published by PHI Learning Pvt. Ltd.. This book was released on 2016-01-02 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise text is designed to present the recent advances in parallel and distributed architectures and algorithms within an integrated framework. Beginning with an introduction to the basic concepts, the book goes on discussing the basic methods of parallelism exploitation in computation through vector processing, super scalar and VLIW processing, array processing, associative processing, systolic algorithms, and dataflow computation. After introducing interconnection networks, it discusses parallel algorithms for sorting, Fourier transform, matrix algebra, and graph theory. The second part focuses on basics and selected theoretical issues of distributed processing. Architectures and algorithms have been dealt in an integrated way throughout the book. The last chapter focuses on the different paradigms and issues of high performance computing making the reading more interesting. This book is meant for the senior level undergraduate and postgraduate students of computer science and engineering, and information technology. The book is also useful for the postgraduate students of computer science and computer application.

Download or read book Computational Gasdynamics written by Culbert B. Laney and published by Cambridge University Press. This book was released on 1998-06-13 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical methods are indispensable tools in the analysis of complex fluid flows. This book focuses on computational techniques for high-speed gas flows, especially gas flows containing shocks and other steep gradients. The book decomposes complicated numerical methods into simple modular parts, showing how each part fits and how each method relates to or differs from others. The text begins with a review of gasdynamics and computational techniques. Next come basic principles of computational gasdynamics. The last two parts cover basic techniques and advanced techniques. Senior and graduate level students, especially in aerospace engineering, as well as researchers and practising engineers, will find a wealth of invaluable information on high-speed gas flows in this text.