Download or read book III V Compound Semiconductors and Devices written by Keh Yung Cheng and published by Springer Nature. This book was released on 2020-11-08 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook gives a complete and fundamental introduction to the properties of III-V compound semiconductor devices, highlighting the theoretical and practical aspects of their device physics. Beginning with an introduction to the basics of semiconductor physics, it presents an overview of the physics and preparation of compound semiconductor materials, as well as a detailed look at the electrical and optical properties of compound semiconductor heterostructures. The book concludes with chapters dedicated to a number of heterostructure electronic and photonic devices, including the high-electron-mobility transistor, the heterojunction bipolar transistor, lasers, unipolar photonic devices, and integrated optoelectronic devices. Featuring chapter-end problems, suggested references for further reading, as well as clear, didactic schematics accompanied by six information-rich appendices, this textbook is ideal for graduate students in the areas of semiconductor physics or electrical engineering. In addition, up-to-date results from published research make this textbook especially well-suited as a self-study and reference guide for engineers and researchers in related industries.
Download or read book Compound Semiconductor Materials and Devices written by Zhaojun Liu and published by Springer Nature. This book was released on 2022-06-01 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since its invention in the 1980s, the compound semiconductor heterojunction-based high electron mobility transistor (HEMT) has been widely used in radio frequency (RF) applications. This book provides readers with broad coverage on techniques and new trends of HEMT, employing leading compound semiconductors, III-N and III-V materials. The content includes an overview of GaN HEMT device-scaling technologies and experimental research breakthroughs in fabricating various GaN MOSHEMT transistors. Readers are offered an inspiring example of monolithic integration of HEMT with LEDs, too. The authors compile the most relevant aspects of III-V HEMT, including the current status of state-of-art HEMTs, their possibility of replacing the Si CMOS transistor channel, and growth opportunities of III-V materials on an Si substrate. With detailed exploration and explanations, the book is a helpful source suitable for anyone learning about and working on compound semiconductor devices.
Download or read book Novel Compound Semiconductor Nanowires written by Fumitaro Ishikawa and published by CRC Press. This book was released on 2017-10-17 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: One dimensional electronic materials are expected to be key components owing to their potential applications in nanoscale electronics, optics, energy storage, and biology. Besides, compound semiconductors have been greatly developed as epitaxial growth crystal materials. Molecular beam and metalorganic vapor phase epitaxy approaches are representative techniques achieving 0D–2D quantum well, wire, and dot semiconductor III-V heterostructures with precise structural accuracy with atomic resolution. Based on the background of those epitaxial techniques, high-quality, single-crystalline III-V heterostructures have been achieved. III-V Nanowires have been proposed for the next generation of nanoscale optical and electrical devices such as nanowire light emitting diodes, lasers, photovoltaics, and transistors. Key issues for the realization of those devices involve the superior mobility and optical properties of III-V materials (i.e., nitride-, phosphide-, and arsenide-related heterostructure systems). Further, the developed epitaxial growth technique enables electronic carrier control through the formation of quantum structures and precise doping, which can be introduced into the nanowire system. The growth can extend the functions of the material systems through the introduction of elements with large miscibility gap, or, alternatively, by the formation of hybrid heterostructures between semiconductors and another material systems. This book reviews recent progresses of such novel III-V semiconductor nanowires, covering a wide range of aspects from the epitaxial growth to the device applications. Prospects of such advanced 1D structures for nanoscience and nanotechnology are also discussed.
Download or read book Handbook of Compound Semiconductors written by Paul H. Holloway and published by Cambridge University Press. This book was released on 2008-10-19 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the recent advances and current technologies used to produce microelectronic and optoelectronic devices from compound semiconductors. It provides a complete overview of the technologies necessary to grow bulk single-crystal substrates, grow hetero-or homoepitaxial films, and process advanced devices such as HBT's, QW diode lasers, etc.
Download or read book III V Compound Semiconductors written by Tingkai Li and published by CRC Press. This book was released on 2016-04-19 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon-based microelectronics has steadily improved in various performance-to-cost metrics. But after decades of processor scaling, fundamental limitations and considerable new challenges have emerged. The integration of compound semiconductors is the leading candidate to address many of these issues and to continue the relentless pursuit of more
Download or read book Compound Semiconductors written by Ferdinand Scholz and published by CRC Press. This book was released on 2017-10-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of compound semiconductor materials and their technology. After presenting a theoretical background, it describes the relevant material preparation technologies for bulk and thin-layer epitaxial growth. It then briefly discusses the electrical, optical, and structural properties of semiconductors, complemented by a description of the most popular characterization tools, before more complex hetero- and low-dimensional structures are discussed. A special chapter is devoted to GaN and related materials, owing to their huge importance in modern optoelectronic and electronic devices, on the one hand, and their particular properties compared to other compound semiconductors, on the other. In the last part of the book, the physics and functionality of optoelectronic and electronic device structures (LEDs, laser diodes, solar cells, field-effect and heterojunction bipolar transistors) are discussed on the basis of the specific properties of compound semiconductors presented in the preceding chapters of the book. Compound semiconductors form the back-bone of all opto-electronic and electronic devices besides the classical Si electronics. Currently the most important field is solid state lighting with highly efficient LEDs emitting visible light. Also laser diodes of all wavelength ranges between mid-infrared and near ultraviolet have been the enabler for a huge number of unprecedented applications like CDs and DVDs for entertainment and data storage, not to speak about the internet, which would be impossible without optical data communications with infrared laser diodes as key elements. This book provides a concise overview over this class of materials, including the most important technological aspects for their fabrication and characterisation, also covering the most relevant devices based on compound semiconductors. It presents therefore an excellent introduction into this subject not only for students, but also for engineers and scientist who intend to put their focus on this field of science.
Download or read book Compound Semiconductor Devices written by Kenneth A. Jackson and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound Semiconductor Devices provides a comprehensive insight into today ́s standard technologies, covering the vast range of semiconductor products and their possible applications. The materials covered runs from the basics of conventional semiconductor technology through standard,power and opto semiconductors, to highly complex memories and microcontrollers and the special devices and modules for smartcards, automotive electronics, consumer electronics and telecommunications. Some chapters are devoted to the production of semiconductor components and their use in electronic systems as well as to quality management. The book offers students and users a unique overview of technology, architecture and areas of application of semiconductor products.
Download or read book 2D Semiconductor Materials and Devices written by Dongzhi Chi and published by Elsevier. This book was released on 2019-10-19 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D Semiconductor Materials and Devices reviews the basic science and state-of-art technology of 2D semiconductor materials and devices. Chapters discuss the basic structure and properties of 2D semiconductor materials, including both elemental (silicene, phosphorene) and compound semiconductors (transition metal dichalcogenide), the current growth and characterization methods of these 2D materials, state-of-the-art devices, and current and potential applications. Reviews a broad range of emerging 2D electronic materials beyond graphene, including silicene, phosphorene and compound semiconductors Provides an in-depth review of material properties, growth and characterization aspects—topics that could enable applications Features contributions from the leading experts in the field
Download or read book Characterization in Compound Semiconductor Processing written by Gary E. McGuire and published by Momentum Press. This book was released on 2010-01-01 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compound semiconductors such as Gallium Arsenide, Gallium Aluminum Arsenide, and Indium Phosphide are often difficult to characterize and present a variety of challenges from substrate preparation, to epitaxial growth to dielectric film deposition to dopant introduction. This book reviews the common classes of compound semiconductors, their physical, optical and electrical properties and the various types of methods used for characterizing them when analyzing for defects and application problems. The book features: -- Characterization of III-V Thin Films for Electronic and Optical applications -- Characterization of Dielectric Insulating Film layers -- A Special case study on Deep Level Transient Spectroscopy on GaAs -- Concise summaries of major characterization technologies for compound semiconductor materials, including Auger Electron Spectroscopy, Ballistic Electron Emission Microscopy, Energy-Dispersive X-Ray Spectroscopy, Neutron Activation Analysis and Raman Spectroscopy
Download or read book Compound Semiconductor Bulk Materials and Characterizations written by Osamu Oda and published by World Scientific. This book was released on 2007 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with compound semiconductor bulk materials and has been written for students, researchers and engineers in material science and device fabrication. It offers them the elementary and intermediate knowledge of compound semiconductor bulk materials necessary for entering this field. In the first part, the book describes the physical properties, crystal growth technologies, principles of crystal growth, various defects in crystals, characterization techniques and applications. In the second and the third parts, the book reviews various compound semiconductor materials, including important industrial materials and the results of recent research.
Download or read book Compound Semiconductor Bulk Materials And Characterizations written by Osamu Oda and published by World Scientific. This book was released on 2007-04-18 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with compound semiconductor bulk materials and has been written for students, researchers and engineers in material science and device fabrication. It offers them the elementary and intermediate knowledge of compound semiconductor bulk materials necessary for entering this field. In the first part, the book describes the physical properties, crystal growth technologies, principles of crystal growth, various defects in crystals, characterization techniques and applications. In the second and the third parts, the book reviews various compound semiconductor materials, including important industrial materials and the results of recent research.
Download or read book Compound Semiconductor Photonics written by Chua Soo-Jin and published by CRC Press. This book was released on 2020-03-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding is a collection of selected papers presented at Symposium O of Compound Semiconductor Photonics in the International Conference on Materials for Advanced Technology (ICMAT), which was held in Singapore from 28 June to 3 July 2009. The symposium covers a wide range of topics from fundamental semiconductor materials study to photonic device fabrication and application. The papers collected are of recent progress in the active and wide range of semiconductor photonics research. They include materials-related papers on III-As/P, III-nitride, quantum dot/wire/dash growth, ZnO, and chalcogenide, and devices-related papers on photonic crystals, VCSEL, quantum dot/dash lasers, LEDs, waveguides, solar cells and heterogeneous integrat
Download or read book Devices for Integrated Circuits written by H. Craig Casey and published by John Wiley & Sons. This book was released on 1998-12-14 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the device physics of the Si and III-V compound semiconductor devices used in integrated circuits. Important equations are derived from basic physical concepts. The physics of these devices are related to the parameters used in SPICE. Terminology is intended to prepare students for reading technical journals on semiconductor devices. This text is suitable for first-year graduate students and seniors in Electrical Engineering; graduate students in Material Science and Chemical Engineering, interested in semiconductor materials; Computer Science students interested in custom VLSI design; and professionals in the semiconductor industry.
Download or read book Compound Semiconductor Electronics written by Michael Shur and published by World Scientific. This book was released on 1996 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many respects, compound semiconductor technology has reached the age of maturity when applications will have been defined, yields are high enough and well established, and gallium arsenide and related compounds have carved many important niches in electronics. This book reviews the state-of-the-art of compound semiconductor electronics. It covers the microwave, millimeter wave, and submillimeter wave devices, monolithic microwave and digital integrated circuits made from compound semiconductors and emerging wide band semiconductor materials. The book is written by leading experts in compound semiconductor electronics from industry and academia and strikes the balance between practical applications, record-breaking results, and design and modeling tools specific for compound semiconductor technology. Engineers, scientists, and graduate students working in solid state electronics and especially in the area of compound semiconductor electronics will find this book very useful. It could also be used as a text or a supplementary text for graduate courses in this field.
Download or read book Compound Semiconductors 2002 written by Marc Ilegems and published by CRC Press. This book was released on 2003-09-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major showcase for the compound semiconductor community, Compound Semiconductors 2002 presents an overview of recent developments in compound semiconductor physics and its technological applications to devices. The topics discussed reflect the significant progress achieved in understanding and mastering compound semiconductor materials and electr
Download or read book Compound Semiconductor Device Physics written by Sandip Tiwari and published by Academic Press. This book was released on 2013-10-22 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides one of the most rigorous treatments of compound semiconductor device physics yet published. A complete understanding of modern devices requires a working knowledge of low-dimensional physics, the use of statistical methods, and the use of one-, two-, and three-dimensional analytical and numerical analysis techniques. With its systematic and detailed**discussion of these topics, this book is ideal for both the researcher and the student. Although the emphasis of this text is on compound semiconductor devices, many of the principles discussed will also be useful to those interested in silicon devices. Each chapter ends with exercises that have been designed to reinforce concepts, to complement arguments or derivations, and to emphasize the nature of approximations by critically evaluating realistic conditions. One of the most rigorous treatments of compound semiconductor device physics yet published**Essential reading for a complete understanding of modern devices**Includes chapter-ending exercises to facilitate understanding
Download or read book Processing and Properties of Compound Semiconductors written by and published by Elsevier. This book was released on 2001-10-20 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The Willardson and Beer series, as it is widely known, has succeeded in producing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise that this tradition will be maintained and even expanded.
