Download or read book Comparing Metals Adsorption by Carbon Adsorbents written by Yusuf Onundi and published by LAP Lambert Academic Publishing. This book was released on 2012-02 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution of the aquatic environment by heavy metals has detrimental effect on living species. In this work, novel carbon nano-materials (CNM) and commercial granular activated carbon (GAC) adsorbents were evaluated for removal of heavy metal matrix (Cu, Ni and Pb) from aqueous solution to meet Department of Environment (DOE) Malaysia s guideline. Results from the characterization of GAC and CNM showed that GAC had higher surface area and more functional groups. Optimum adsorption capacity of GAC and CNM were observed at pH 5 and 1 g/L dosage, while equilibrium adsorption conditions were generally noticed by 60 minutes of agitation at 100 rpm. The initial metal concentrations and functional groups on adsorbents were the major factors affecting the affinity of metals by both GAC and CNM.
Download or read book Biosorbents for Metal Ions written by D A John Wase and published by CRC Press. This book was released on 1997-08-05 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals can be dispersed, both naturally and by man's activities, into any of the Earth's elements - soil, water or air. Biological techniques for removing metal pollutants from soil, air or water are now attracting great interest, both because they are seen as more environmentally friendly than chemical treatments, and because, in some cases at lea
Download or read book Heavy Metals Adsorption written by Ajay Kumar Goswami and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-11-07 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reviews the state-of-the art methods developed and used to remove heavy metals. It presents both industrial waste and mineral based adsorbent as well as bio waste materials making the book absolutely a source of low cost methods available till date.
Download or read book Green Adsorbents to Remove Metals Dyes and Boron from Polluted Water written by Inamuddin and published by Springer Nature. This book was released on 2020-08-31 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews adsorption techniques to clean wastewater, with focus on pollution by dyes and heavy metals. Advanced adsorbents include carbon nanomaterials, biomass, cellulose, polymers, clay, composites and chelating materials.
Download or read book Composite Nanoadsorbents written by George Z. Kyzas and published by Elsevier. This book was released on 2018-11-30 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Nanoadsorbents discusses the most recent advances in the field, including promising techniques for waste water decontamination and the advantages and drawbacks of nanoadsorbents in these applications. The implications of nanoadsorbents to public health and future developments for facilitating environmental sustainability are also discussed. New approaches for nanomaterials are analyzed, focusing on the effect of nanotechnology in adsorption applications. The effectiveness of nanosized materials is evaluated, along with cost factors and new synthesis routes of composite nanomaterials. Combining the areas of nanotechnology, adsorption, and composite surface chemistry, the synthesis, modifications and applications of nanotechnology in the adsorption process are demonstrated. Edited by a prolific expert in the field, this book will be a valuable resource for researchers, postgraduate students and professionals in the fields of nanotechnology, adsorption and materials synthesis. - Bridges the gap between theory and application of composite nanoadsorbents - Provides an understanding of the benefits of nanoadsorbents and their cost, efficiency and novelty - Includes material on inorganic nanoadsorbents and carbon nanotubes
Download or read book Green Adsorbents written by George Z. Kyzas and published by Bentham Science Publishers. This book was released on 2015-12-01 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption technology is a promising avenue for wastewater treatment. Numerous adsorbent materials are presently synthesized. Green or environmental friendly adsorbents are derived from plants and agricultural crop sources, giving them a very low production cost when compared to synthetic polymers. This monograph explains the basic principles of green adsorption technology, their production processes and strategies to remove different categories of environmental pollutants (dyes, heavy metals and phenols/pesticides). The book explains details in terms of features such as adsorption capacity, physico-chemical kinetics and reuse potential. A summary of the economics and future prospect for green adsorption technology is also given. This text is a handy reference for environmental chemistry students, researchers and policy makers.
Download or read book Milestones in Powerful Adsorbents of Heavy Metal Ions written by Xin-Gui Li and published by Cambridge Scholars Publishing. This book was released on 2024-04-02 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serious challenges instigated by pollution are driving research seeking feasible strategies for social, economic, and environmental sustainability. The fascinating science of selective adsorbents of heavy- or precious-metal pollutants such as lead, mercury, gold, and silver ions has attracted investigation by many capable materials scientists, chemists, and environmental engineers, resulting in rapidly increasing progress with time. This book reveals theoretical and practical information that will assist in the study, research, and innovations of effective adsorbents towards toxic and noble metal ions. It allows the reader to pursue an answer to this mystery through interdisciplinary scientific knowledge of material design, synthesis, and environmental purification of strong adsorbents, as has never been presented systematically before, demonstrating the nature of the unique molecular and morphological structures of the adsorbent and how to design and optimize molecular and material structures.
Download or read book Applications of Biochar for Environmental Safety written by Ahmed Abdelhafez and published by BoD – Books on Demand. This book was released on 2020-07-22 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biochar is a carbon-rich material produced from the pyrolysis of organic materials from agricultural and forestry biomass at a relatively low temperature in the absence of oxygen. As such, it has potential for solving many agricultural and environmental problems.This book is divided into five sections: “Introduction,” “Production and Legislation of Biochar,” “Applications of Biochar for Soil Fertility Improvement,” “Role of Biochar for Soil Remediation and Ameliorating Salinity Effects” and “Applications of Biochar for Water Treatment.” Chapters address topics such as the pros and cons of biochar, its production, and its role in remediating and treating contaminated soils and water.
Download or read book Reviews of Environmental Contamination and Toxicology Volume 232 written by David M. Whitacre and published by Springer. This book was released on 2014-07-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews of Environmental Contamination and Toxicology attempts to provide concise, critical reviews of timely advances, philosophy and significant areas of accomplished or needed endeavor in the total field of xenobiotics, in any segment of the environment, as well as toxicological implications.
Download or read book Novel Carbon Adsorbents written by Juan M.D. Tascón and published by Elsevier. This book was released on 2012-11-23 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following in the lineage of Adsorption by Carbons (Bottani & Tascon, 2008), this work explores current research within contemporary novel carbon adsorbents. Both basic and applied aspects are discussed for this important class of materials. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed by a section concerning the fundamentals of adsorption by carbons. This leads to development of a series of theoretical concepts that serve as an introduction to the following section in which adsorption is mainly envisaged as a tool to characterize the porous texture and surface chemistry of carbons. Particular attention is paid to novel nanocarbons, and the electrochemistry of adsorption by carbons is also addressed. Finally, several important technological applications of gas and liquid adsorption by carbons in areas such as environmental protection and energy storage constitute the last section of the book. - Encompasses fundamental science of adsorption by carbons, in one location, supporting current R&D without extensive literature review - Describes adsorption as it is currently applied to major novel types of carbon materials, including carbon gels, carbide-derived carbons, zeolite-templated carbvons, hydrothermal carbons, carbon nanohorns and graphene - Specific discussion of fuel storage, environmental remediation and biomedical applications, of contemporary interest to many surface chemists and applications-focused researchers
Download or read book Adsorption of Heavy Metals by Using Activated Carbon written by Mohamed El Zayat and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this Book, The utilization of agricultural waste to produce valuable products has been investigated to minimize serious public health risks from exposure to dangerous fumes that come from burning the agricultural wastes in open fields. In this study, activated carbon produced from cotton stalks was examined for the removal of target heavy metal contaminants from water and wastewater. Adsorption studies conducted in completely mixed batch reactors and continuous flow columns showed a good affinity of the produced activated carbon to remove heavy metals, namely lead, cadmium and copper from aqueous solutions compared to other commercial adsorbents. The highest adsorption capacity was for lead, followed by copper and then cadmium. Multicomponent metal adsorption experiments indicated a competition for the available surface sites. Adsorption capacities in the mixture were reduced from their single-solute values for all metals.
Download or read book Kinetics of Metal Ion Adsorption from Aqueous Solutions written by Sotira Yiacoumi and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is intended to provide a systematic presentation of theories concerning the adsorption of metal ions from aqueous solutions onto surfaces of natural and synthetic substances and to outline methods and procedures to estimate the extent and progress ofadsorption. As heavy metals and the problems associated with their transport and distribution are of serious concern to human health and the environment, the materials presented in this volume have both theoretical and practical significance. In writing this monograph, one ofour goals was to prepare a book useful to environmental workers and practicing engineers. For this reason, our presentation relies heavily on concepts commonly used in the environmental engineering literature. In fact, the volume was prepared for readers with a basic understanding of environmental engineering principles and some knowledge of adsorption processes. No prior familiarity with the ionic solute adsorption at solid-solution interfaces is assumed. Instead, introduction of the necessary background information was included. Generally speaking, metal ion adsorption may be studied in terms of three distinct but interrelated phenomena: surface ionization, complex formation, and the formation and presence of an electrostatic double layer adjacent to adsorbent surfaces. Analyses of these phenomena with various degrees of sophistication are xviii ADSORPTION OF METAL IONS FROM AQUEOUS SOLUTIONS presented, and their various combinations yield different models that describe metal ion adsorption.
Download or read book Adsorption by Carbons written by Eduardo J. Bottani and published by Elsevier. This book was released on 2011-10-10 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption by Carbons covers the most significant aspects of adsorption by carbons, attempting to fill the existing gap between the fields of adsorption and carbonaceous materials. Both basic and applied aspects are presented. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed by a section concerning the fundamentals of adsorption by carbons. This leads to development of a series of theoretical concepts that serve as an introduction to the following section in which adsorption is mainly envisaged as a tool to characterize the porous texture and surface chemistry of carbons. Particular attention is paid to some novel nanocarbons, and the electrochemistry of adsorption by carbons is also addressed. Finally, several important technological applications of gas and liquid adsorption by carbons in areas such as environmental protection and energy storage constitute the last section of the book. - The first book to address the interplay between carbonaceous materials and adsorption - Includes important environmental applications, such as the removal of volatile organic compounds from polluted atmospheres - Covers both gas-solid and liquid-solid adsorption
Download or read book Clean Coal Technologies written by Rajesh Kumar Jyothi and published by Springer Nature. This book was released on 2021-05-10 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of art of the several advanced approaches to beneficiation of coal. The influence of recent technology attains the advantages of processing coal, purification studies, rheological behavior, and the mineral beneficiation. The experts collected in this volume have contributed significantly to the enrichment in the in depth knowledge not only in context of working knowledge, but also future prospects of clean coal technology.
Download or read book Micropollutants and Challenges written by Afsane Chavoshani and published by Elsevier. This book was released on 2020-06-12 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micropollutants and Challenges: Emerging in the Aquatic Environments and Treatment Processes systematically summarizes the characteristics, micropollutants types, production resources, occurrence in aqueous environments, health effects, methods of detection and treatments. Throughout each chapter, the following topics will be presented: (i) The quality and quantity evaluation of aquatic micro-pollutants, (ii) The need for innovative and affordable wastewater treatment technologies, and (iii) Combinations of different conventional and advanced technologies, including the biological and plant-based strategies that seem most promising. - Presents information on the micropollutants that threaten all living organisms, showing the importance and relevance of this topic - Assesses the effects of micropollutants on surface and groundwater - Provides solutions for the removal of micropollutants in conventional and advanced treatment processes and compares the efficiency of different processes
Download or read book Adsorption of Heavy Metals Solution on Commercial Activated Carbon Adsorbent Batch Studies written by Mohd Nazri Bin Shamsudin and published by . This book was released on 2011 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of commercial activated carbon to adsorb Pb+ from aqueous solution has been investigated through batch experiments . The adsorption of lead onto commercial activated carbon has been found to depend on adsorbent dose, initial concentration and contact time. The experiments were carried out at natural dose, initial concentration and contact time. The experiments were carried out at natural solution ph. Equilibrium data fitted well with the Langmuir model and Freundlich model with a maximum adsorption capacity of 23.81 mg of Pb/g of commercial activated carbon.
Download or read book Green Adsorbents for Pollutant Removal written by Grégorio Crini and published by Springer. This book was released on 2018-06-27 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume on adsorption using green adsorbents and is written by international contributors who are the leading experts in the adsorption field. The first volume provides an overview of fundamentals and design of adsorption processes. For people who are new to the field, the book starts by two overview chapters presenting the principles and properties of wastewater treatment and adsorption processes. The book also provides a comprehensive source of knowledge on acid-base properties of biosorbents. It discusses fractal-like kinetic models for fluid-solid adsorption, reports on the chemical characterization of oxidized activated carbons for metal removal, and the use of magnetic biosorbents in water treatment. Furthermore, the thermodynamic properties of metals adsorption by green adsorbents, and biosorption of polycyclic aromatic hydrocarbons and organic pollutants are reviewed, and finally the recent trends and impact of nanomaterials as green adsorbent and potential catalysts for environmental applications are summarized. The audience for this book includes students, environmentalists, engineers, water scientists, civil and industrial personnel who wish to specialize in adsorption technology. Academically, this book will be of use to students in chemical and environmental engineering who wish to learn about adsorption and its fundamentals. It has also been compiled for practicing engineers who wish to know about recent developments on adsorbent materials in order to promote further research toward improving and developing newer adsorbents and processes for the efficient removal of pollutants from industrial effluents. It is hoped that the book will serve as a readable and useful presentation not only for undergraduate and postgraduate students but also for the water scientists and engineers and as a convenient reference handbook in the form of numerous recent examples and appended information.
