Download or read book Digitally Assisted Analog and RF CMOS Circuit Design for Software Defined Radio written by Kenichi Okada and published by Springer Science & Business Media. This book was released on 2011-08-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state-of-the-art in RF, analog, and mixed-signal circuit design for Software Defined Radio (SDR). It synthesizes for analog/RF circuit designers the most important general design approaches to take advantage of the most recent CMOS technology, which can integrate millions of transistors, as well as several real examples from the most recent research results.

Download or read book Wideband CMOS Receivers written by Miguel D. Fernandes and published by Springer. This book was released on 2015-07-10 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates how to design a wideband receiver operating in current mode, in which the noise and non-linearity are reduced, implemented in a low cost single chip, using standard CMOS technology. The authors present a solution to remove the transimpedance amplifier (TIA) block and connect directly the mixer’s output to a passive second-order continuous-time Σ∆ analog to digital converter (ADC), which operates in current-mode. These techniques enable the reduction of area, power consumption, and cost in modern CMOS receivers.

Download or read book Performance Optimization Techniques in Analog Mixed Signal and Radio Frequency Circuit Design written by Fakhfakh, Mourad and published by IGI Global. This book was released on 2014-10-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improving the performance of existing technologies has always been a focal practice in the development of computational systems. However, as circuitry is becoming more complex, conventional techniques are becoming outdated and new research methodologies are being implemented by designers. Performance Optimization Techniques in Analog, Mix-Signal, and Radio-Frequency Circuit Design features recent advances in the engineering of integrated systems with prominence placed on methods for maximizing the functionality of these systems. This book emphasizes prospective trends in the field and is an essential reference source for researchers, practitioners, engineers, and technology designers interested in emerging research and techniques in the performance optimization of different circuit designs.

Download or read book CMOS Cellular Receiver Front Ends written by Johan Janssens and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Cellular Receiver Front-Ends: from Specification to Realization deals with the design of the receive path of a highly-integrated CMOS cellular transceiver for the GSM-1800 cellular system. The complete design trajectory is covered, starting from the documents describing the standard down to the systematic development of CMOS receiver ICs that comply to the standard. The design of CMOS receivers is tackled at all abstraction levels: from architecture level, via circuit level, down to the device level, and the other way around. The theoretical core of the book discusses the fundamental and more advanced aspects of RF CMOS design. It focuses specifically on all aspects of the design of high-performance CMOS low-noise amplifiers.

Download or read book Essentials of RF Front end Design and Testing written by Ibrahim A. Haroun and published by John Wiley & Sons. This book was released on 2023-12-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials of RF Front-end Design and Testing Highly comprehensive text delivering the RF system essentials required to understand, develop, and evaluate the performance of RF wireless systems Essentials of RF Front-end Design and Testing: A Practical Guide for Wireless Systems is a system-oriented book which provides several wireless communication disciplines in one volume. The book covers a wide range of topics, including antenna fundamentals, phased array antenna and MIMOs that are crucial for the latest 5G mmWave and future 6G wireless systems, high-frequency transmission lines, RF building blocks that are necessary to understand how various RF subsystems are interrelated and implemented in wireless systems, and test setups for conducted and Over-The-Air (OTA) transmitter and receiver tests. The text enables readers to understand, develop, and evaluate the performance of RF wireless systems. The text focuses on RF system performance and testing rather than mathematical proofs, which are available in the provided references. Although the book is intended for testing and building RF system prototypes, it has the sufficient theoretical background needed for RF systems design and testing. Each chapter includes learning objectives, review questions, and references. Sample topics covered in the book include: An overview of cellular phone systems, 5G NR wireless technology, MIMO technology, terahertz communications for 6G wireless technology, and modulation and multiplexing Analog and digital modulation techniques, including AM, SSB, FM, FSK, PSK, QAM, SSFH, DSSS, and OFDM High-frequency transmission lines, S-parameters, low-noise amplifier, RF mixers, filters, power amplifiers, frequency synthesizers, circulators/isolators, directional couplers, RF switches, and RF phase shifters Antenna basics, including antenna gain, radiation pattern, input impedance, polarization, and antenna noise temperature; microstrip antenna, antenna array, propagation path loss, compact antenna test range (CATR), and test setups for antenna measurements. Basics of MIMO and beamforming technology, including analog, digital, and hybrid beamforming Test setups for characterizing the key RF performance parameters of 5G New Radio base station transmitters and receivers. Essentials of RF Front-end Design and Testing: A Practical Guide for Wireless Systems is a highly comprehensive resource on the subject and is intended for graduate engineers and technologists involved in designing, developing, and testing wireless systems, along with undergraduate/graduate students, enhancing their learning experience of RF subsystems/systems characterization.

Download or read book CMOS Front Ends for Millimeter Wave Wireless Communication Systems written by Noël Deferm and published by Springer. This book was released on 2015-03-23 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the development of circuit and system design techniques for millimeter wave wireless communication systems above 90GHz and fabricated in nanometer scale CMOS technologies. The authors demonstrate a hands-on methodology that was applied to design six different chips, in order to overcome a variety of design challenges. Behavior of both actives and passives, and how to design them to achieve high performance is discussed in detail. This book serves as a valuable reference for millimeter wave designers, working at both the transistor level and system level.

Download or read book Low Power CMOS Wireless Communications written by Samuel Sheng and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Power CMOS Wireless Communications: A Wideband CDMA System Design focuses on the issues behind the development of a high-bandwidth, silicon complementary metal-oxide silicon (CMOS) low-power transceiver system for mobile RF wireless data communications. In the design of any RF communications system, three distinct factors must be considered: the propagation environment in question, the multiplexing and modulation of user data streams, and the complexity of hardware required to implement the desired link. None of these can be allowed to dominate. Coupling between system design and implementation is the key to simultaneously achieving high bandwidth and low power and is emphasized throughout the book. The material presented in Low-Power CMOS Wireless Communications: A Wideband CDMA System Design is the result of broadband wireless systems research done at the University of California, Berkeley. The wireless development was motivated by a much larger collaborative effort known as the Infopad Project, which was centered on developing a mobile information terminal for multimedia content - a wireless `network computer'. The desire for mobility, combined with the need to support potentially hundreds of users simultaneously accessing full-motion digital video, demanded a wireless solution that was of far lower power and higher data rate than could be provided by existing systems. That solution is the topic of this book: a case study of not only wireless systems designs, but also the implementation of such a link, down to the analog and digital circuit level.

Download or read book Advances in VLSI and Embedded Systems written by Anand D. Darji and published by Springer Nature. This book was released on 2022-11-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed proceedings of the 2nd International Conference on Advances in VLSI and Embedded Systems (AVES 2021). This book covers cutting-edge original research in VLSI design, devices and emerging technologies, embedded systems, and CAD for VLSI. To address the demand for complex and high-functionality systems as well as portable consumer electronics, the contents focus on advanced topics of circuit and systems design, fabrication, testing, and standardization. This book is useful for students, researchers as well as industry professionals interested in emerging trends in VLSI and embedded systems.

Download or read book Radio Frequency Integrated Circuit Design for Cognitive Radio Systems written by Amr Fahim and published by Springer. This book was released on 2015-03-03 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills an information gap on cognitive radios, since the discussion focuses on the implementation issues that are unique to cognitive radios and how to solve them at both the architecture and circuit levels. This is the first book to describe in detail cognitive radio systems, as well as the circuit implementation and architectures required to implement such systems. Throughout the book, requirements and constraints imposed by cognitive radio systems are emphasized when discussing the circuit implementation details. This is a valuable reference for anybody with background in analog and radio frequency (RF) integrated circuit design, needing to learn more about integrated circuits requirements and implementation for cognitive radio systems.

Download or read book Broadband RF and Microwave Amplifiers written by Andrei Grebennikov and published by CRC Press. This book was released on 2017-07-12 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband RF and Microwave Amplifiers provides extensive coverage of broadband radio frequency (RF) and microwave power amplifier design, including well-known historical and recent novel schematic configurations, theoretical approaches, circuit simulation results, and practical implementation strategies. The text begins by introducing two-port networks to illustrate the behavior of linear and nonlinear circuits, explaining the basic principles of power amplifier design, and discussing impedance matching and broadband power amplifier design using lumped and distributed parameters. The book then: Shows how dissipative or lossy gain-compensation-matching circuits can offer an important trade-off between power gain, reflection coefficient, and operating frequency bandwidth Describes the design of broadband RF and microwave amplifiers using real frequency techniques (RFTs), supplying numerous examples based on the MATLAB® programming process Examines Class-E power amplifiers, Doherty amplifiers, low-noise amplifiers, microwave gallium arsenide field-effect transistor (GaAs FET)-distributed amplifiers, and complementary metal-oxide semiconductor (CMOS) amplifiers for ultra-wideband (UWB) applications Broadband RF and Microwave Amplifiers combines theoretical analysis with practical design to create a solid foundation for innovative ideas and circuit design techniques.

Download or read book 5G and E Band Communication Circuits in Deep Scaled CMOS written by Marco Vigilante and published by Springer. This book was released on 2018-02-07 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses design techniques, layout details and measurements of several key analog building blocks that currently limit the performance of 5G and E-Band transceivers implemented in deep-scaled CMOS. The authors present recent developments in low-noise quadrature VCOs and tunable inductor-less frequency dividers. Moreover, the design of low-loss broadband transformer-based filters that realize inter-stage matching, power division/combining and impedance transformation is discussed in great detail. The design and measurements of a low-noise amplifier, a downconverter and a highly-linear power amplifier that leverage the proposed techniques are shown. All the prototypes were realized in advanced nanometer scaled CMOS technologies without RF thick to metal option.

Download or read book Modern Communications Receiver Design and Technology written by Cornell Drentea and published by Artech House. This book was released on 2010 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive sourcebook thoroughly explores the state-of-the-art in communications receivers, providing detailed practical guidance for constructing an actual high dynamic range receiver from system design to packaging. You also find clear explanations of the technical underpinnings that you need to understand for your work in the field . This cutting-edge reference presents the latest information on modern superheterodyne receivers, dynamic range, mixers, oscillators, complex coherent synthesizers, automatic gain control, DSP and software radios.You find in-depth discussions on system design, including coverage of all pertinent data and tools. Moreover, the book offers you a solid understanding of packaging and mechanical considerations, as well as a look at tomorrowOCOs receiver technology, including new Bragg-cell applications for ultra-wideband electronic warfare receivers. This one-stop resource is packed with over 300 illustrations that support critical topics throughout."

Download or read book Lumped Elements for RF and Microwave Circuits Second Edition written by Inder J. Bahl and published by Artech House. This book was released on 2022-12-31 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated and including entirely new chapters, this Second Edition provides in-depth coverage of the different types of RF and microwave circuit elements, including inductors, capacitors, resistors, transformers, via holes, airbridges, and crossovers. Featuring extensive formulas for lumped elements, design trade-offs, and an updated and current list of references, the book helps you understand the value and usefulness of lumped elements in the design of RF, microwave and millimeter wave components and circuits. You’ll find a balanced treatment between standalone lumped elements and their circuits using MICs, MMICs and RFICs technologies. You’ll also find detailed information on a broader range RFICs that was not available when the popular first edition was published. The book captures – in one consolidated volume -- the fundamentals, equations, modeling, examples, references and overall procedures to design, test and produce microwave components that are indispensable in industry and academia today. With its superb organization and expanded coverage of the subject, this is a must-have, go-to resource for practicing engineers and researchers in industry, government and university and microwave engineers working in the antenna area. Students will also find it a useful reference with its clear explanations, many examples and practical modeling guidelines.

Download or read book Handbook of Research on Software Defined and Cognitive Radio Technologies for Dynamic Spectrum Management written by Kaabouch, Naima and published by IGI Global. This book was released on 2014-10-31 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inadequate use of wireless spectrum resources has recently motivated researchers and practitioners to look for new ways to improve resource efficiency. As a result, new cognitive radio technologies have been proposed as an effective solution. The Handbook of Research on Software-Defined and Cognitive Radio Technologies for Dynamic Spectrum Management examines the emerging technologies being used to overcome radio spectrum scarcity. Providing timely and comprehensive coverage on topics pertaining to channel estimation, spectrum sensing, communication security, frequency hopping, and smart antennas, this research work is essential for use by educators, industrialists, and graduate students, as well as academicians researching in the field.

Download or read book Design Of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006-01-17 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible.The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O.

Download or read book THz and Sub THz CMOS Electronics for High Speed Telecommunication written by Carl D’heer and published by Springer Nature. This book was released on with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CMOS Analog IC Design for 5G and Beyond written by Sangeeta Singh and published by Springer Nature. This book was released on 2021-02-07 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on addressing the designs of FinFET-based analog ICs for 5G and E-band communication networks. In addition, it also incorporates some of the contemporary developments over different fields. It highlights the latest advances, problems and challenges and presents the latest research results in the field of mm-wave integrated circuits designing based on scientific literature and its practical realization. The traditional approaches are excluded in this book. The authors cover various design guidelines to be taken care for while designing these circuits and detrimental scaling effects on the same. Moreover, Gallium Nitrides (GaN) are also reported to show huge potentials for the power amplifier designing required in 5G communication network. Subsequently, to enhance the readability of this book, the authors also include real-time problems in RFIC designing, case studies from experimental results, and clearly demarking design guidelines for the 5G communication ICs designing. This book incorporates the most recent FinFET architecture for the analog IC designing and the scaling effects along with the GaN technology as well.