Download or read book Analogue and Digital Communication Techniques written by Grahame Smillie and published by Elsevier. This book was released on 1999-04-02 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid expansion of digital communications, particularly in the fields of TV and mobile telephones does not overide the need for a clear understanding of analogue frequencies. Moreover, analogue technology will play an important role in communications well into the 21st century.Covering the principles behind analogue and digital communication systems, this book takes a less mathematical approach than is often found at this level. It begins with basic principles such as information systems, data compression and error detection before moving on to more advanced topics such as Pulse Code Modulation systems and digital microwave systems. Data protocols are also given so that the reader can gain a good understanding of more complex communication systems. 'Analogue and Digital Communication Techniques' has been designed for students studying HND electronic communication courses but will also be useful to junior undergraduates on similar courses. Some knowledge of basic elctronics is assumed.

Download or read book Communication Techniques for Digital and Analog Signals written by Morton Kanefsky and published by HarperCollins Publishers. This book was released on 1985 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction To Analog And Digital Communications written by Haykin and published by John Wiley & Sons. This book was released on 2009-07 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory treatment of communication theory as applied to the transmission of information-bearing signals with attention given to both analog and digital communications. Chapter 1 reviews basic concepts. Chapters 2 through 4 pertain to the characterization of signals and systems. Chapters 5 through 7 are concerned with transmission of message signals over communication channels. Chapters 8 through 10 deal with noise in analog and digital communications. Each chapter (except chapter 1) begins with introductory remarks and ends with a problem set. Treatment is self-contained with numerous worked-out examples to support the theory.· Fourier Analysis · Filtering and Signal Distortion · Spectral Density and Correlation · Digital Coding of Analog Waveforms · Intersymbol Interference and Its Cures · Modulation Techniques · Probability Theory and Random Processes · Noise in Analog Modulation · Optimum Receivers for Data Communication

Download or read book Digital Signal Processing Techniques and Applications in Radar Image Processing written by Bu-Chin Wang and published by John Wiley & Sons. This book was released on 2008-08-29 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A self-contained approach to DSP techniques and applications in radar imaging The processing of radar images, in general, consists of three major fields: Digital Signal Processing (DSP); antenna and radar operation; and algorithms used to process the radar images. This book brings together material from these different areas to allow readers to gain a thorough understanding of how radar images are processed. The book is divided into three main parts and covers: * DSP principles and signal characteristics in both analog and digital domains, advanced signal sampling, and interpolation techniques * Antenna theory (Maxwell equation, radiation field from dipole, and linear phased array), radar fundamentals, radar modulation, and target-detection techniques (continuous wave, pulsed Linear Frequency Modulation, and stepped Frequency Modulation) * Properties of radar images, algorithms used for radar image processing, simulation examples, and results of satellite image files processed by Range-Doppler and Stolt interpolation algorithms The book fully utilizes the computing and graphical capability of MATLAB? to display the signals at various processing stages in 3D and/or cross-sectional views. Additionally, the text is complemented with flowcharts and system block diagrams to aid in readers' comprehension. Digital Signal Processing Techniques and Applications in Radar Image Processing serves as an ideal textbook for graduate students and practicing engineers who wish to gain firsthand experience in applying DSP principles and technologies to radar imaging.

Download or read book Digital Communication Techniques written by Christian Gontrand and published by John Wiley & Sons. This book was released on 2020-02-19 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been considerable developments in information and communication technology. This has led to an increase in the number of applications available, as well as an increase in their variability. As such, it has become important to understand and master problems related to establishing radio links, the layout and flow of source data, the power available from antennas, the selectivity and sensitivity of receivers, etc. This book discusses digital modulations, their extensions and environment, as well as a few basic mathematical tools. An understanding of degree level mathematics or its equivalent is a prerequisite to reading this book. Digital Communication Techniques is aimed at licensed professionals, engineers, Masters students and researchers whose field is in related areas such as hardware, phase-locked loops, voltage-controlled oscillators or phase noise.

Download or read book Digital Signal Processing in Communications Systems written by Marvin Frerking and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: An engineer's introduction to concepts, algorithms, and advancements in Digital Signal Processing. This lucidly written resource makes extensive use of real-world examples as it covers all the important design and engineering references.

Download or read book Introduction to Digital Communications written by Ali Grami and published by Academic Press. This book was released on 2015-02-25 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Digital Communications explores the basic principles in the analysis and design of digital communication systems, including design objectives, constraints and trade-offs. After portraying the big picture and laying the background material, this book lucidly progresses to a comprehensive and detailed discussion of all critical elements and key functions in digital communications. - The first undergraduate-level textbook exclusively on digital communications, with a complete coverage of source and channel coding, modulation, and synchronization. - Discusses major aspects of communication networks and multiuser communications - Provides insightful descriptions and intuitive explanations of all complex concepts - Focuses on practical applications and illustrative examples. - A companion Web site includes solutions to end-of-chapter problems and computer exercises, lecture slides, and figures and tables from the text

Download or read book Analog and Digital Signals and Systems written by R. K. Rao Yarlagadda and published by Springer Science & Business Media. This book was released on 2010-08-05 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic, comprehensive treatment of analog and discrete signal analysis and synthesis and an introduction to analog communication theory. This evolved from my 40 years of teaching at Oklahoma State University (OSU). It is based on three courses, Signal Analysis (a second semester junior level course), Active Filters (a first semester senior level course), and Digital signal processing (a second semester senior level course). I have taught these courses a number of times using this material along with existing texts. The references for the books and journals (over 160 references) are listed in the bibliography section. At the undergraduate level, most signal analysis courses do not require probability theory. Only, a very small portion of this topic is included here. I emphasized the basics in the book with simple mathematics and the soph- tication is minimal. Theorem-proof type of material is not emphasized. The book uses the following model: 1. Learn basics 2. Check the work using bench marks 3. Use software to see if the results are accurate The book provides detailed examples (over 400) with applications. A thr- number system is used consisting of chapter number – section number – example or problem number, thus allowing the student to quickly identify the related material in the appropriate section of the book. The book includes well over 400 homework problems. Problem numbers are identified using the above three-number system.

Download or read book Introduction to Communication Systems written by Upamanyu Madhow and published by Cambridge University Press. This book was released on 2014-11-24 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible undergraduate textbook introducing key fundamental principles behind modern communication systems, supported by exercises, software problems and lab exercises.

Download or read book Introduction to Digital Signal Processing Using MATLAB with Application to Digital Communications written by K.S. Thyagarajan and published by Springer. This book was released on 2018-05-28 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides engineering students with instruction on processing signals encountered in speech, music, and wireless communications using software or hardware by employing basic mathematical methods. The book starts with an overview of signal processing, introducing readers to the field. It goes on to give instruction in converting continuous time signals into digital signals and discusses various methods to process the digital signals, such as filtering. The author uses MATLAB throughout as a user-friendly software tool to perform various digital signal processing algorithms and to simulate real-time systems. Readers learn how to convert analog signals into digital signals; how to process these signals using software or hardware; and how to write algorithms to perform useful operations on the acquired signals such as filtering, detecting digitally modulated signals, correcting channel distortions, etc. Students are also shown how to convert MATLAB codes into firmware codes. Further, students will be able to apply the basic digital signal processing techniques in their workplace. The book is based on the author's popular online course at University of California, San Diego.

Download or read book Modulation Techniques written by Zulkifli bin Che Din and published by Zulkifli Che Din. This book was released on 2023-10-01 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modulation Techniques is a book that introduces readers to communication systems. This e-book covers the principles of communications as well as analog and digital modulation techniques which is design to Diploma Electrical ( Communication ).

Download or read book Solutions Manual to Accompany Communication Techniques for Digital and Analog Signals written by Morton Kanefsky and published by . This book was released on 1985 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Digital and Analog Communication Systems written by B. P. Lathi and published by Oxford University Press, USA. This book was released on 1995 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: With exceptionally clear writing, Lathi takes students step by step through a history of communications systems from elementary signal analysis to advanced concepts in communications theory. The first four chapters of the text present basic principles, subsequent chapters offer ample material for flexibility in course content and level. All Topics are covered in detail, including a thorough treatment of frequency modulation and phase modulation. Numerous worked examples in each chapter and over 300 end-of-chapter problems and numerous illustrations and figures support the content.

Download or read book Synchronization in Digital Communication Systems written by Fuyun Ling and published by Cambridge University Press. This book was released on 2017-06-22 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide helps readers to learn how to develop and implement synchronization functions in digital communication systems.

Download or read book Signal Processing Techniques for Communication written by K.C. Raveendranathan and published by CRC Press. This book was released on 2024-10-30 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reference text discusses signal processing tools and techniques used for the design, testing, and deployment of communication systems. It further explores software simulation and modeling tools like MATLAB, GNU Octave, Mathematica, and Python for modeling, simulation, and detailed analysis leading to comprehensive insights into communication systems. The book explains topics such as source coding, pulse demodulation systems, and the principle of sampling and aliasing. This book: Discusses modern techniques including analog and digital filter design, and modulation principles including quadrature amplitude modulation, and differential phase shift keying. Covers filter design using MATLAB, system simulation using Simulink, signal processing toolbox, linear time-invariant systems, and non-linear time-variant systems. Explains important pulse keying techniques including Gaussian minimum shift keying and quadrature phase shift keying. Presents signal processing tools and techniques for communication systems design, modeling, simulation, and deployment. Illustrates topics such as software-defined radio (SDR) systems, spectrum sensing, and automated modulation sensing. The text is primarily written for senior undergraduates, graduate students, and academic researchers in the fields of electrical engineering, electronics and communication engineering, computer science, and engineering.

Download or read book ANALOG COMMUNICATION written by TOMAR, GEETAM SINGH and published by PHI Learning Pvt. Ltd.. This book was released on 2016-02-25 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book carries a holistic approach on the analog communication, with all the basic concepts pertaining to the subject described in it. The text provides an incisive insight into the subject via simple, elegant and explicit presentation. Organised in ten chapters, the book dexterously assimilates the various terms and techniques used in analog communication to enhance a broader understanding of the concepts and their applications. Commencing with the basic introduction, the book goes on to provide description on analog amplitude modulation, single sideband modulation, analog angle modulation, pulse modulation digital transmission of analog signals and multiplexing. Finally, it discusses about noise, random signal and processes, information theory and coding, and communication detectors and filters. The background of each topic in the book is prepared sensibly by providing suitable illustrations, numerical examples, detailed explanation of each step given, thereby making the understanding of complicated derivations easier. This well-structured book is specifically written for the undergraduate students of electronics and communication engineering, and postgraduate students of electronics.

Download or read book Digital Signal Processing in Modern Communication Systems Edition 2 written by Andreas Schwarzinger and published by Andreas Schwarzinger. This book was released on 2022-01-13 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Digital Signal Processing in Modern Communication Systems (www.signal-processing.net) takes you on a journey that starts with basic DSP principles and ends with a treatment of modern wireless modems such as single-tone and OFDM transceivers which are found in GSM, WLAN, LTE and 5G technologies. Throughout this journey, we will cover signal processing topics that are applicable not just to the field of communications but to many engineering disciplines. This text steps outside the often dry mathematical presentation of more traditional DSP books and provides a more intuitive approach to this fascinating topic. Some of this book's uniqueness can be summarized as follows: - An intuitive approach to the topic of digital signal processing. - Working in-book MatLab examples supporting all important concepts. - A large scope covering basic concepts (correlation, convolution, DFT, FIR filters ...) as well as advanced topics (optimization, adaptive signal processing, equalization, OFDM, MIMO ... ). - MatLab modeling of analog/RF effects (multipath channel, thermal noise, phase noise, IQ imbalances, DC and frequency offsets) that must be addressed and solved in modern modem design. - Real world topics that go beyond the ordinary communication textbooks such as signal synchronization, modem rate management, and fixed-point effects. All in all, this book is a must-have for students and practicing engineers who want to build upon the principles of Digital Signal Processing, enrich their understanding with advanced topics, and then apply that knowledge to the design of modern wireless modems.