Download or read book Communication Protocol Specification and Verification written by Richard Lai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Communication protocols are rules whereby meaningful communication can be exchanged between different communicating entities. In general, they are complex and difficult to design and implement. Specifications of communication protocols written in a natural language (e.g. English) can be unclear or ambiguous, and may be subject to different interpretations. As a result, independent implementations of the same protocol may be incompatible. In addition, the complexity of protocols make them very hard to analyze in an informal way. There is, therefore, a need for precise and unambiguous specification using some formal languages. Many protocol implementations used in the field have almost suffered from failures, such as deadlocks. When the conditions in which the protocols work correctly have been changed, there has been no general method available for determining how they will work under the new conditions. It is necessary for protocol designers to have techniques and tools to detect errors in the early phase of design, because the later in the process that a fault is discovered, the greater the cost of rectifying it. Protocol verification is a process of checking whether the interactions of protocol entities, according to the protocol specification, do indeed satisfy certain properties or conditions which may be either general (e.g., absence of deadlock) or specific to the particular protocol system directly derived from the specification. In the 80s, an ISO (International Organization for Standardization) working group began a programme of work to develop formal languages which were suitable for Open Systems Interconnection (OSI). This group called such languages Formal Description Techniques (FDTs). Some of the objectives of ISO in developing FDTs were: enabling unambiguous, clear and precise descriptions of OSI protocol standards to be written, and allowing such specifications to be verified for correctness. There are two FDTs standardized by ISO: LOTOS and Estelle. Communication Protocol Specification and Verification is written to address the two issues discussed above: the needs to specify a protocol using an FDT and to verify its correctness in order to uncover specification errors in the early stage of a protocol development process. The readership primarily consists of advanced undergraduate students, postgraduate students, communication software developers, telecommunication engineers, EDP managers, researchers and software engineers. It is intended as an advanced undergraduate or postgraduate textbook, and a reference for communication protocol professionals.
Download or read book Protocol Specification and Testing written by Katalin Tarnay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing number of computer networks has aroused users' interest in many and various fields of applications, in how a computer network can be built, and in how it may be used. The fundamental rules of computer networks are the protocols. "A protocol is a set of rules that governs the operation of functional units to achieve communication" [STA-86}. The book follows a practical approach to protocol speci fication and testing, but at the same time it introduces clearly and precisely the relevant theoretical fundamentals. The principal objectives of this work are: to familiarize readers with communication protocols, to present the main, formal description techniques, to apply various formal description techniques to protocol specification and testing. It is considered that the readership will primarily consist of protocol developers, protocol users, and all who utilize protocol testers. Secondly the book is suggested for postgraduate courses or other university courses dealing with communication networks and data communication. A large part of the book provides a comprehensive overview for managers; some parts are of especial interest to postal organizations. The book consists of three parts: the first part introduces the OS! Reference Model, it provides an overview of the most frequently used protocols and explains the fundamentals of protocol testing. The second part familiarizes readers with the methods used for protocol 5pecification, generation, and testing. Finite-state machines, formal grammars, Petri nets and some speCification languages (SDL, ESTELLE, LOTOS) are discussed in a pragmatic style. The third part deals with applications.
Download or read book Protocol Specification Testing and Verification XV written by Piotr Dembinski and published by Springer. This book was released on 2016-01-09 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the latest research worldwide on communications protocols, emphasizing specification and compliance testing. It presents the complete proceedings of the fifteenth meeting on `Protocol Specification, Testing and Verification' arranged by the International Federation for Information Processing.
Download or read book Protocol Specification Testing and Verification XII written by R.J. Linn and published by Elsevier. This book was released on 2016-09-20 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than a decade, researchers and engineers have been addressing the problem of the application of formal description techniques to protocol specification, implementation, testing and verification. This book identifies the many successes that have been achieved within the industrial framework and the difficulties encountered in applying theoretical methods to practical situations. Issues discussed include: testing and certification; verification; validation; environments and automated tools; formal specifications; protocol conversion; implementation; specification languages and models. Consideration is also given to the concerns surrounding education available to students and the need to upgrade and develop this through sponsorship of a study of an appropriate curriculum at both undergraduate and graduate levels. It is hoped this publication will stimulate such support and inspire further research in this important arena.
Download or read book Protocol Specification Testing and Verification XIV written by S.T. Vuong and published by Springer. This book was released on 2013-11-11 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This PSTV'94 Symposium is the fourteenth of a series of annual meetings organized under the auspices of IFIP W.G. 6.1, a Working Group dedicated to "Architectures and Protocols for Computer Networks". This is the oldest and most established symposium in the emerging field of protocol engineering which has spawn many international conferences including FORTE (International Conference on Formal Description Tech niques), IWPTS (International Workshop on Protocol Test Systems), ICNP (Interna tional Conference on Network Protocols) and CAY (Conference on Computer-Aided Verification). The main objective of this PSTV symposium is to provide a forum for researchers and practitioners in industry and academia interested in advances in using formal methods and methodologies to specify, develop, test and verify communication protocols and distributed systems. This year's PSTV symposium enjoys a nice mixture of formal methods and practical issues in network protocols through the invited addresses of three outstanding speakers, Ed Brinksma (University of Twente), Raj Jain (Ohio State University) and David Tennenhouse (MIT) as well as 5 tutorials, in addition to 9 techni cal sessions and two practical panel sessions. The 5 tutorials are offered on the first day in two parallel tracks for intensive exposure on hot topics of current interest. This year, out of 51 submissions the Program Committee selected 18 regular papers (with an allotment of 16 pages in the Proceedings) and 9 mini-papers (of 8 pages).
Download or read book Formal Description Techniques IX written by R. Gotzhein and published by Springer. This book was released on 1996-09-30 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the combined proceedings of the latest IFIP Formal Description Techniques (FDTs) and Protocol Specification, Testing and Verification (PSTV) series. It addresses FDTs applicable to communication protocols and distributed systems, with special emphasis on standardised FDTs. It features state-of-the-art in theory, application, tools and industrialisation of formal description.
Download or read book Protocol Engineering written by Hartmut König and published by Springer Science & Business Media. This book was released on 2012-10-09 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Communication protocols form the operational basis of computer networks and telecommunication systems. They are behavior conventions that describe how communication systems interact with each other, defining the temporal order of the interactions and the formats of the data units exchanged – essentially they determine the efficiency and reliability of computer networks. Protocol Engineering is an important discipline covering the design, validation, and implementation of communication protocols. Part I of this book is devoted to the fundamentals of communication protocols, describing their working principles and implicitly also those of computer networks. The author introduces the concepts of service, protocol, layer, and layered architecture, and introduces the main elements required in the description of protocols using a model language. He then presents the most important protocol functions. Part II deals with the description of communication protocols, offering an overview of the various formal methods, the essence of Protocol Engineering. The author introduces the fundamental description methods, such as finite state machines, Petri nets, process calculi, and temporal logics, that are in part used as semantic models for formal description techniques. He then introduces one representative technique for each of the main description approaches, among others SDL and LOTOS, and surveys the use of UML for describing protocols. Part III covers the protocol life cycle and the most important development stages, presenting the reader with approaches for systematic protocol design, with various verification methods, with the main implementation techniques, and with strategies for their testing, in particular with conformance and interoperability tests, and the test description language TTCN. The author uses the simple data transfer example protocol XDT (eXample Data Transfer) throughout the book as a reference protocol to exemplify the various description techniques and to demonstrate important validation and implementation approaches. The book is an introduction to communication protocols and their development for undergraduate and graduate students of computer science and communication technology, and it is also a suitable reference for engineers and programmers. Most chapters contain exercises, and the author's accompanying website provides further online material including a complete formal description of the XDT protocol and an animated simulation visualizing its behavior.
Download or read book Communication Protocol Engineering written by Miroslav Popovic and published by CRC Press. This book was released on 2018-10-03 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: As embedded systems become more and more complex, so does the challenge of enabling fast and efficient communication between the various subsystems that make up a modern embedded system. Facing this challenge from a practical standpoint, Communication Protocol Engineering outlines a hands-on methodology for developing effective communication protocols for large-scale systems. A Complete Roadmap This book brings together the leading methods and techniques developed from state-of-the-art methodologies for protocol engineering, from specification and description methods to cleanroom engineering and agile methods. Popovic leads you from conceptualization of requirements to analysis, design, implementation, testing, and verification. He covers the four main design languages: specifications and description language (SDL); message sequence charts (MSCs); tree and tabular combined notation (TTCN); and unified modeling language (UML). Practical Tools for Real Skills Fully illustrated with more than 150 figures, this guide also serves as a finite state machine (FSM) library programmer's reference manual. The author demonstrates how to build an FSM library, explains the components of such a library, and applies the principles to FSM library-based examples. Nowhere else are the fundamental principles of communication protocols so clearly and effectively applied to real systems development than in Communication Protocol Engineering. No matter in what stage of the process you find yourself, this is the ideal tool to make your systems successful.
Download or read book Formal Description Techniques and Protocol Specification Testing and Verification written by Stan Budkowski and published by Springer. This book was released on 2013-04-17 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formal Description Techniques and Protocol Specification, Testing and Verification addresses formal description techniques (FDTs) applicable to distributed systems and communication protocols. It aims to present the state of the art in theory, application, tools and industrialization of FDTs. Among the important features presented are: FDT-based system and protocol engineering; FDT-application to distributed systems; Protocol engineering; Practical experience and case studies. Formal Description Techniques and Protocol Specification, Testing and Verification comprises the proceedings of the Joint International Conference on Formal Description Techniques for Distributed Systems and Communication Protocols and Protocol Specification, Testing and Verification, sponsored by the International Federation for Information Processing, held in November 1998, Paris, France. Formal Description Techniques and Protocol Specification, Testing and Verification is suitable as a secondary text for a graduate-level course on Distributed Systems or Communications, and as a reference for researchers and practitioners in industry.
Download or read book Formal Description Techniques and Protocol Specification Testing and Verification written by Atsushi Togashi and published by Springer. This book was released on 2013-06-05 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: FORTE/PSTV '97 addresses Formal Description Techniques (FDTs) applicable to Distributed Systems and Communication Protocols (such as Estelle, LOTOS, SDL, ASN.1, TTCN, Z, Automata, Process Algebra, Logic). The conference is a forum for presentation of the state-of-the-art in theory, application, tools and industrialization of FDTs, and provides an excellent orientation for newcomers.
Download or read book High level Petri Nets written by Kurt Jensen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-level Petri nets are now widely used in both theoretical analysis and practical modelling of concurrent systems. The main reason for the success of this class of net models is that they make it possible to obtain much more succinct and manageable de scriptions than can be obtained by means of low-level Petri nets-while, on the other hand, they still offer a wide range of analysis methods and tools. The step from low-level nets to high-level nets can be compared to the step from assembly languages to modem programming languages with an elaborated type concept. In low-level nets there is only one kind of token and this means that the state of a place is described by an integer (and in many cases even by a boolean value). In high-level nets each token can carry complex information which, e. g. , may describe the entire state of a process or a data base. Today most practical applications of Petri nets use one of the different kinds of high-level nets. A considerable body of knowledge exists about high-level Petri nets this includes theoretical foundations, analysis methods and many applications. Unfortunately, the papers on high-level Petri nets have been scattered throughout various journals and collections. As a result, much of this knowledge is not readily available to people who may be interested in using high-level nets.
Download or read book Protocol Specification Testing and Verification IV written by Yechiam Yemini and published by North Holland. This book was released on 1985 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. This book covers research in protocol theory and analysis, specification and formal models of protocols, protocol validation and verification, performance analysis of protocols, and protocol design implementation and testing.Main Features: 1. Broad coverage of the research in the area of computer communication protocols. 2. A combination of theoretical and experimental research on protocol modelling, design, analysis, synthesis, verification and testing. 3. A description of international research activities conducted by leading researchers in the field from over 13 countries.
Download or read book Advances in Computers written by and published by Academic Press. This book was released on 1989-09-08 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Computers
Download or read book Protocol Specification Testing and Verification VIII written by Sudhir Aggarwal and published by Elsevier Science & Technology. This book was released on 1988 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Validation of Computer Protocols written by Gerard J. Holzmann and published by . This book was released on 1991 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the fundamental problems of designing logically consistent methods of communication between multiple computer processes. Standard protocol design problems, such as error control and flow control, are covered in detail, but also structured design methods and the construction of formal validation models. The book contains complete listings and explanations of new protocol validation and design tool called SPIN. Author is in charge of protocol design at Bell Labs. Professionals who bought Tanenbaum's COMPUTER NETWORKS, 2/E and Comer's TCP/IP will buy this. This is the first book to cover automated protocol design and validation tools extensively.
Download or read book Testing of Communicating Systems written by Nina Yevtushenko and published by Springer. This book was released on 2013-11-11 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Testing of Communicating Systems presents the latest world-wide results in both theory and practice. This volume provides a forum in which the substantial volume of research on the testing of communicating systems, spanning from conformance testing through interoperability testing, to performance and QoS testing, is brought together. The following topics are discussed in detail: Types of testing; Phases of the testing process; Classes of systems to be tested; and Theory and practice of testing. This book contains the selected proceedings of the 11th International Workshop on the Testing of Communicating Systems, formerly the International Workshop on Protocol Test Systems, sponsored by the International Federation for Information Processing (IFIP), and held in Tomsk, Russia, in August/September 1998. Testing of Communicating Systems will be essential reading for engineers, IT managers and research personnel working in computer sciences and telecommunications.
Download or read book Protocol Specification and Testing written by Katie Tarnay and published by Springer. This book was released on 1991-04-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing number of computer networks has aroused users' interest in many and various fields of applications, in how a computer network can be built, and in how it may be used. The fundamental rules of computer networks are the protocols. "A protocol is a set of rules that governs the operation of functional units to achieve communication" [STA-86}. The book follows a practical approach to protocol speci fication and testing, but at the same time it introduces clearly and precisely the relevant theoretical fundamentals. The principal objectives of this work are: to familiarize readers with communication protocols, to present the main, formal description techniques, to apply various formal description techniques to protocol specification and testing. It is considered that the readership will primarily consist of protocol developers, protocol users, and all who utilize protocol testers. Secondly the book is suggested for postgraduate courses or other university courses dealing with communication networks and data communication. A large part of the book provides a comprehensive overview for managers; some parts are of especial interest to postal organizations. The book consists of three parts: the first part introduces the OS! Reference Model, it provides an overview of the most frequently used protocols and explains the fundamentals of protocol testing. The second part familiarizes readers with the methods used for protocol 5pecification, generation, and testing. Finite-state machines, formal grammars, Petri nets and some speCification languages (SDL, ESTELLE, LOTOS) are discussed in a pragmatic style. The third part deals with applications.
