Download or read book Recommended Specifications and Quality Assurance Guidelines for Steel Moment Frame Construction for Seismic Applications FEMA 353 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-15 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications has been prepared by the SAC Joint Venture, under contract to the Federal Emergency Management Agency, to indicate those standards of workmanship for structural steel fabrication and erection deemed necessary to achieve reliably the design performance objectives contained in the set of companion publications prepared under this same contract: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, which provides recommended criteria, supplemental to FEMA-302, 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria; FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings, which provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance; and FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded, Steel Moment-Frame Buildings, which provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. The recommended design criteria contained in these three companion reports are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications.

Download or read book Recommended Specifications and Quality Assurance Guidelines for Steel Moment frame Construction for Seismic Applications written by SAC Joint Venture. Guidelines Development Committee and published by . This book was released on 2000 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel Construction Manual written by American Institute of Steel Construction and published by Amer Inst of Steel Construction. This book was released on 2011 with total page 2192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1926 [i.e. 1927] under title: Steel construction; title of 8th ed.: Manual of steel construction.

Download or read book Modern Steel Construction written by and published by . This book was released on 2008 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The First 60 Years written by Leslie H. Gillette and published by . This book was released on 1980 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Regulatory Guide written by U.S. Nuclear Regulatory Commission. Office of Standards Development and published by . This book was released on with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: 1. Power reactors.--2. Research and test reactors.--3. Fuels and materials facilities.--4. Environmental and siting.--5. Materials and plant protection.--6. Products.--7. Transportation.--8. Occupational health.--9. Antitrust reviews.--10. General.

Download or read book NEHRP Commentary on the Gidelines for the Seismic Rehabilitation of Buildings written by Eugene Zeller and published by DIANE Publishing. This book was released on 2000-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document from the National Earthquake Hazards Reduction Program (NEHRP) was prepared for the Building Seismic Safety Council (BSSC) with funding from the Federal Emergency Management Agency (FEMA). It provides commentary on the NEHRP Guidelines for the Seismic Rehabilitation of Buildings. It contains systematic guidance enabling design professionals to formulate effective & reliable rehabilitation approaches that will limit the expected earthquake damage to a specified range for a specified level of ground shaking. This kind of guidance applicable to all types of existing buildings & in all parts of the country has never existed before. Illustrated.

Download or read book Catalog of Copyright Entries Third Series written by Library of Congress. Copyright Office and published by Copyright Office, Library of Congress. This book was released on 1973 with total page 1938 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Federal Register written by and published by . This book was released on 2012-05 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Code Requirements for Structural Concrete ACI 318 05 and Commentary ACI 318R 05 written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steelwork Corrosion Control written by D.A. Bayliss and published by CRC Press. This book was released on 1991-07-18 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steelwork Corrosion Control is a comprehensive revision and updating of a similar book by the authors, published in 1985. As with the previous book, it is designed principally for engineers, architects and designers for whom the protection of structural steelwork is an important, albeit a comparatively minor, part of their total professional activi

Download or read book Building Code Requirements for Structural Concrete ACI 318 08 and Commentary written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2008 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate AWS standard. Uses of the Code include adoption by reference in general building codes, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code portion cannot be included. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code portion are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.

Download or read book Acceptance of Stay Cable Systems Using Prestressing Steels written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2005-01-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fib Recommendation gives technical guidelines regarding design, testing, acceptance, installation, qualification, inspection and maintenance of stay cable systems using prestressing steels (strands, wires or bars) as tensile elements, which can be applied internationally. This Recommendation is applicable for cable-stayed bridges and other suspended structures such as roofs. It may also be used for hangers in arch structures and as suspension cables, as appropriate. This Recommendations has been formulated by an international working group comprising more than 20 experts from administrative authorities, universities, laboratories, owners, structural designers, suppliers of prestressing steels and stay cable suppliers. The text has been written to cover best construction practices around the world, and to provide material specifications that are considered to be the most advanced available at the time of preparing this text. For ease of use (for client, designer and cable supplier), the complex content has been arranged thematically according to the system components into chapters focusing on performance characteristics, requirements and acceptance criteria. Requirements and comments have been specified for all parties involved in design and construction in order to aim for a uniform and high quality and durability. The interfaces to the structural designer are highlighted. The essential subjects are: Design and detailing of stay cables including saddles and damping devices Durability requirements and corrosion protection systems Requirements for the materials Testing requirements for the stay cables Installation, tolerances, qualification of companies and personnel Inspection, maintenance and repair. This Recommendation does not cover the technology of stay cables whose tensile elements are ropes, locked-coil cables, etc. or which consist of composite materials. Nevertheless, in many cases the specified performance criteria may also be applicable to these systems, although numerical values given for the acceptance criteria may need to be adjusted. For these systems it has been difficult to provide multiple protective layers similar to those specified for stay cables made from prestressing steel and therefore, the quality of corrosion protection may not be equivalent. While extradosed cables have similarities with stay cables, generally agreed design and system acceptance criteria are not yet available and therefore, this type of cable is not covered.

Download or read book Code Requirements for Environmental Engineering Concrete Structures ACI 350 01 and Commentary ACI 350R 01 written by ACI Committee 350 and published by American Concrete Institute. This book was released on 2001 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standards for tests and materials - Durability requirements - Concrete quality, mixing, and placing - Formwork, embedded pipes, and construction and movement joints - Details of reinforcement - Analysis and design general considerations - Strength and serviceability requirements - Flexure and axial loads - Shear and torsion - Development and splices of reinforcement - Two-way slab systems - Walls - Footings - Precast concrete - Composite concrete flexural members - Prestressed concrete - Shells and folded plate members - Strength evaluation of existing structures - Special provisions for seismic design - Structural plain concrete.

Download or read book Steel Structures Third Edition written by Zahid Ahmad Siddiqi and published by Zahid Ahmad Siddiqi. This book was released on with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the end of year 2005, new AISC Specification was released that contained formulas for both Allowable Stress Design and Load and Resistance Factor Design in non-dimensional format to be used for both the FPS and SI units. In year 2010, this specification for steel structures design and the seismic provisions were updated. This book is prepared in the light of the new Specifications. AASHTO LRFD Specifications are used to present the concepts of bridge loading and the design procedure. As in the first edition, in place of explaining the various aspects of design such as checking various strength capacities, stability requirements and serviceability limits in separate chapters, complete design including all the major steps of design are presented in individual units for various types of members. It is expected that this procedure gives true picture of design process to the beginners and the practicing engineers. This book is more useful if it is used along with another publication “LRFD Steel Design Aids”, termed as Design Aids in this book. The flow charts given in different sections of this book may easily be computerized to get custom-made computer programs for personal use. International system of units (SI) is used throughout the book. Suggestions for further improvement of the presentation will be highly appreciated and will be incorporated in the future editions.

Download or read book Engineering Journal written by and published by . This book was released on 1973 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures Part 2 Commentary 2000 Edition March 2001 written by and published by . This book was released on 2001 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: