Download or read book Commande Des Systems Param tres R partis written by and published by . This book was released on 1982 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Command control for Real time Systems written by Mohammed Chadli and published by John Wiley & Sons. This book was released on 2013-04-25 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: A real-time system is a complex system which is an integral part of an industrial or experimental system, a vehicle or a construction machine. The peculiarity of these systems is that they are driven by real-time targets in distributed environments. Command-control for Real-time Systems presents the calculation of correction for industrial systems of different physical natures, their implementation on real-time target industrial systems (PLC-SCADA, embedded systems with distributed networks, Networked Control Systems) and their validation by simulation. It optimizes industrial processes by the use of automatic tools, industrial computing and communications networks and aims to successively integrate new control laws (linear, nonlinear and fuzzy controllers) so that users can leverage the power of engineering science as an automatic service process optimization while maintaining their high maintainability facilities. Contents 1. Introduction. 2. Modeling Tools, Sébastien Cabaret and Mohammed Chadli. 3. Control Tools, Mohammed Chadli and Hervé Coppier. 4. Application to Cryogenic Systems, Marco Pezzetti, Hervé Coppier and Mohammed Chadli. 5. Applications to a Thermal System and to Gas Systems, Sébastien Cabaret and Hervé Coppier. 6. Application to Vehicles, Elie Kafrouni and Mohammed Chadli. 7. Real-time Implementation, Marco Pezzetti and Hervé Coppier. About the Authors Mohamed Chadli is a senior lecturer and research supervisor at the University of Picardie Jules Verne (UPJV) in France. His main research interests lie in robust control, the diagnosis and fault tolerant control of polytopic systems and applications for automobiles. He is a senior member of the IEEE, and Vice President of the AAI Club as part of SEE-France. He is the author/co-author of 3 books, book chapters and more than 100 articles published in international journals and conferences. Hervé Coppier is a lecturing researcher at ESIEE-Amiens in France. He has collaborated with industrialists in the field of automation and industrial computing, particularly with CERN, and has spearheaded various international European projects.

Download or read book Control and Estimation in Distributed Parameter Systems written by H. T. Banks and published by SIAM. This book was released on 1992-01-01 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and lucid text that relates frequency domain techniques to state-space or time domain approaches for infinite-dimensional systems.

Download or read book Identification and System Parameter Estimation 1982 written by G. A. Bekey and published by Elsevier. This book was released on 2016-06-06 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identification and System Parameter Estimation 1982 covers the proceedings of the Sixth International Federation of Automatic Control (IFAC) Symposium. The book also serves as a tribute to Dr. Naum S. Rajbman. The text covers issues concerning identification and estimation, such as increasing interrelationships between identification/estimation and other aspects of system theory, including control theory, signal processing, experimental design, numerical mathematics, pattern recognition, and information theory. The book also provides coverage regarding the application and problems faced by several engineering and scientific fields that use identification and estimation, such as biological systems, traffic control, geophysics, aeronautics, robotics, economics, and power systems. Researchers from all scientific fields will find this book a great reference material, since it presents topics that concern various disciplines.

Download or read book Control of Distributed Parameter Systems 1982 written by Jean-Pierre Babary and published by Elsevier. This book was released on 2014-05-16 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Distributed Parameter Systems 1982 covers the proceeding of the Third International Federation of Automatic Control (IFAC) Symposium on Control of Distributed Parameter Systems. The book reviews papers that tackle issues concerning the control of distributed parameter systems, such as modeling, identification, estimation, stabilization, optimization, and energy system. The topics that the book tackles include notes on optimal and estimation result of nonlinear systems; approximation of the parameter identification problem in distributed parameters systems; and optimal control of a punctually located heat source. This text also encompasses the stabilization of nonlinear parabolic equations and the decoupling approach to the control of large spaceborne antenna systems. Stability of Hilbert space contraction semigroups and the tracking problem in the fractional representation approach are also discussed. This book will be of great interest to researchers and professionals whose work concerns automated control systems.

Download or read book Dynamical Systems Control Coding Computer Vision written by Giorgio Picci and published by Birkhäuser. This book was released on 2012-12-06 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of essays devoted in part to new research direc tions in systems, networks, and control theory, and in part to the growing interaction of these disciplines with new sectors of engineering and applied sciences like coding, computer vision, and hybrid systems. These are new areas of rapid growth and of increasing importance in modern technology. The essays, written by world-leading experts in the field, reproduce and expand the plenary and minicoursejminisymposia invited lectures which were delivered at the Mathematical Theory of Networks and Systems Sym posium (MTNS-98), held in Padova, Italy, on July 6-10, 1998. Systems, control, and networks theory has permeated the development of much of present day technology. The impact has been visible in the past fifty years through the dramatic expansion and achievements of the aerospace and avionics industry, through process control and factory au tomation, robotics, communication signals analysis and synthesis, and, more recently, even finance, to name just the most visible applications. The theory has developed from the early phase of its history when the ba sic tools were elementary complex analysis, Laplace transform, and linear differential equations, to present day, where the mathematics ranges widely from functional analysis, PDE's, abstract algebra, stochastic processes and differential geometry. Irrespective of the particular tools, however, the ba sic unifying paradigms of feedback, stability, optimal control, and recursive filtering, have remained the bulk of the field and continue to be the basic motivation for the theory, coming from the real world.

Download or read book Multivariable Technological Systems written by D.P. Atherton and published by Elsevier. This book was released on 2014-06-28 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent results in the development and application of analysis and design techniques for the control of multivariable systems are discussed in this volume.

Download or read book Electrical Actuators written by Bernard de Fornel and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The different chapters of this book cover a large range of information regarding electrical actuators, including: synchronous and asynchronous machine modeling in order to measure and identify offline and online parameters using modern optimization methods; identification in real time of parameters with Luenberger filter and the extended Kalman filter; estimation of non-measurable variables, first by linear estimates and observers, then by lower observers. Robustness is a very problematic issue, as well, which is fully explored in a chapter dedicated to the subject. Finally, the estimate of non-measurable mechanical variables is particularly dealt with: estimate of load moment, then observation of the positioning of a command without mechanical sensor. The conditions to measure variables and real implementation of numerical algorithms are also examined with particular attention.

Download or read book Control of Distributed Parameter Systems 1989 written by M. Amouroux and published by Elsevier. This book was released on 2014-06-28 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents state-of-the-art reports on the theory, and current and future applications of control of distributed parameter systems. The papers cover the progress not only in traditional methodology and pure research in control theory, but also the rapid growth of its importance for different applications. This title will be of interest to researchers working in the areas of mathematics, automatic control, computer science and engineering.

Download or read book Identification and System Parameter Estimation written by Pieter Eykhoff and published by . This book was released on 1973 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Differentially Flat Systems written by Hebertt Sira-Ramírez and published by CRC Press. This book was released on 2018-10-03 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrating the power, simplicity, and generality of the concept of flatness, this reference explains how to identify, utilize, and apply flatness in system planning and design. The book includes a large assortment of exercises and models that range from elementary to complex classes of systems. Leading students and professionals through a vast array of designs, simulations, and analytical studies on the traditional uses of flatness, Differentially Flat Systems contains an extensive amount of examples that showcase the value of flatness in system design, demonstrate how flatness can be assessed in the context of perturbed systems and apply static and dynamic feedback controller design techniques.

Download or read book Applied Optimal Control Theory of Distributed Systems written by K.A. Lurie and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents an extended and substantially revised version of my earlierbook, Optimal Control in Problems ofMathematical Physics,originally published in Russian in 1975. About 60% of the text has been completely revised and major additions have been included which have produced a practically new text. My aim was to modernize the presentation but also to preserve the original results, some of which are little known to a Western reader. The idea of composites, which is the core of the modern theory of optimization, was initiated in the early seventies. The reader will find here its implementation in the problem of optimal conductivity distribution in an MHD-generatorchannel flow.Sincethen it has emergedinto an extensive theory which is undergoing a continuous development. The book does not pretend to be a textbook, neither does it offer a systematic presentation of the theory. Rather, it reflects a concept which I consider as fundamental in the modern approach to optimization of dis tributed systems. Bibliographical notes,though extensive, do not pretend to be exhaustive as well. My thanks are due to ProfessorJean-Louis Armand and ProfessorWolf Stadler whose friendly assistance in translating and polishing the text was so valuable. I am indebted to Mrs. Kathleen Durand and Mrs. Colleen Lewis for the hard job of typing large portions of the manuscript.

Download or read book Robust Control and Linear Parameter Varying Approaches written by Olivier Sename and published by Springer. This book was released on 2013-02-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicles are complex systems (non-linear, multi-variable) where the abundance of embedded controllers should ensure better security. This book aims at emphasizing the interest and potential of Linear Parameter Varying methods within the framework of vehicle dynamics, e.g. proposed control-oriented model, complex enough to handle some system non linearities but still simple for control or observer design, take into account the adaptability of the vehicle's response to driving situations, to the driver request and/or to the road sollicitations, manage interactions between various actuators to optimize the dynamic behavior of vehicles. This book results from the 32th International Summer School in Automatic that held in Grenoble, France, in September 2011, where recent methods (based on robust control and LPV technics), then applied to the control of vehicle dynamics, have been presented. After some theoretical background and a view on some recent works on LPV approaches (for modelling, analysis, control, observation and diagnosis), the main emphasis is put on road vehicles but some illustrations are concerned with railway, aerospace and underwater vehicles. The main objective of the book is to demonstrate the value of this approach for controlling the dynamic behavior of vehicles. It presents, in a rm way, background and new results on LPV methods and their application to vehicle dynamics.

Download or read book Control Methods for Electrical Machines written by Rene Husson and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The type of control system used for electrical machines depends on the use (nature of the load, operating states, etc.) to which the machine will be put. The precise type of use determines the control laws which apply. Mechanics are also very important, because they affect performance. Another factor of essential importance in industrial applications is operating safety. Finally, the problem of how to control a number of different machines, whose interactions and outputs must be coordinated, is addressed and solutions are presented. These and other issues are addressed here by a range of expert contributors, each of whom are specialists in their particular field. This book is primarily aimed at those involved in complex systems design, but engineers in a range of related fields such as electrical engineering, instrumentation and control, and industrial engineering, will also find this a useful source of information.

Download or read book Digital Signal Processing for Multimedia Systems written by Keshab K. Parhi and published by CRC Press. This book was released on 2018-10-03 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses a wide selection of multimedia applications, programmable and custom architectures for the implementations of multimedia systems, and arithmetic architectures and design methodologies. The book covers recent applications of digital signal processing algorithms in multimedia, presents high-speed and low-priority binary and finite field arithmetic architectures, details VHDL-based implementation approaches, and more.

Download or read book Robotics Mechatronics and Manufacturing Systems written by T. Takamori and published by Elsevier. This book was released on 2012-12-02 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important problems in the field of engineering and technology is the development of so-called intelligent systems, which can perform various intellectual tasks. This book is dedicated to the current progress of research in this vast field and specifically explores the topics of robotics, mechatronics and manufacturing systems.

Download or read book European Control Conference 1991 written by and published by European Control Association. This book was released on 1991-07-02 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the European Control Conference 1991, July 2-5, 1991, Grenoble, France