Download or read book Robotics Research written by Nancy M. Amato and published by Springer Nature. This book was released on 2019-11-28 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISRR, the "International Symposium on Robotics Research", is one of robotics pioneering Symposia, which has established over the past two decades some of the field's most fundamental and lasting contributions. This book presents the results of the eighteenth edition of "Robotics Research" ISRR17, offering a collection of a broad range of topics in robotics. This symposium took place in Puerto Varas, Chile from December 11th to December 14th, 2017. The content of the contributions provides a wide coverage of the current state of robotics research, the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and new emerging areas of applications. The diversity, novelty, and span of the work unfolding in these areas reveal the field's increased maturity and expanded scope and define the state of the art of robotics and its future direction.

Download or read book Automated Planning and Acting written by Malik Ghallab and published by Cambridge University Press. This book was released on 2016-08-09 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent and advanced techniques for creating autonomous AI systems capable of planning and acting effectively.

Download or read book RoboCup 2003 Robot Soccer World Cup VII written by Daniel Polani and published by Springer Science & Business Media. This book was released on 2004-09-02 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the seventh official archival publication devoted to RoboCup. It documents the achievements presented at the 7th Robot World Cup Soccer and Rescue Competition and Conferences held in Padua, Italy, in July 2003. The 39 revised full papers and 35 revised poster papers presented together with an overview and roadmap for the RoboCup initiative and 3 invited papers were carefully reviewed and selected from 125 symposium paper submissions. This book is mandatory reading for the rapidly growing RoboCup community as well as a valuable source of reference and inspiration for R&D professionals interested in robotics, distributed artificial intelligence, and multi-agent systems.

Download or read book Simulation Modeling and Programming for Autonomous Robots written by Davide Brugali and published by Springer. This book was released on 2014-09-19 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2014, held in Bergamo, Italy, in October 2014. The 49 revised full papers presented were carefully reviewed and selected from 62 submissions. The papers are organized in topical sections on simulation, modeling, programming, architectures, methods and tools, and systems and applications.

Download or read book Planning Algorithms written by Steven M. LaValle and published by Cambridge University Press. This book was released on 2006-05-29 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planning algorithms are impacting technical disciplines and industries around the world, including robotics, computer-aided design, manufacturing, computer graphics, aerospace applications, drug design, and protein folding. Written for computer scientists and engineers with interests in artificial intelligence, robotics, or control theory, this is the only book on this topic that tightly integrates a vast body of literature from several fields into a coherent source for teaching and reference in a wide variety of applications. Difficult mathematical material is explained through hundreds of examples and illustrations.

Download or read book Robotics Research written by Henrik I. Christensen and published by Springer. This book was released on 2016-08-25 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of papers presented at the 15th International Symposium of Robotic Research (ISRR). ISRR is the biennial meeting of the International Foundation of Robotic Research (IFRR) and its 15th edition took place in Flagstaff, Arizona on December 9 to December 12, 2011. As for the previous symposia, ISRR 2011 followed up on the successful concept of a mixture of invited contributions and open submissions. Therefore approximately half of the 37 contributions were invited contributions from outstanding researchers selected by the IFRR officers and the program committee, and the other half were chosen among the open submissions after peer review. This selection process resulted in a truly excellent technical program which featured some of the very best of robotic research. The program was organized around oral presentation in a single-track format and included for the first time a small number of interactive presentations. The symposium contributions contained in this volume report on a variety of new robotics research results covering a broad spectrum including perception, manipulation, grasping, vehicles and design, navigation, control and integration, estimation and SLAM.

Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.

Download or read book Knowledge Representations for Planning Manipulation Tasks written by Franziska Zacharias and published by Springer Science & Business Media. This book was released on 2012-01-12 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the capability map, a novel general representation of the kinematic capabilities of a robot arm, is introduced. The capability map allows to determine how well regions of the workspace are reachable for the end effector in different orientations. It is a representation that can be machine processed as well as intuitively visualized for the human. The capability map and the derived algorithms are a valuable source of information for high- and low-level planning processes. The versatile applicability of the capability map is shown by examples from several distinct application domains. In human-robot interaction, a bi-manual interface for tele-operation is objectively evaluated. In low-level geometric planning, more human-like motion is planned for a humanoid robot while also reducing the computation time. And in high-level task reasoning, the suitability of a robot for a task is evaluated.

Download or read book Learning for Adaptive and Reactive Robot Control written by Aude Billard and published by MIT Press. This book was released on 2022-02-08 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods by which robots can learn control laws that enable real-time reactivity using dynamical systems; with applications and exercises. This book presents a wealth of machine learning techniques to make the control of robots more flexible and safe when interacting with humans. It introduces a set of control laws that enable reactivity using dynamical systems, a widely used method for solving motion-planning problems in robotics. These control approaches can replan in milliseconds to adapt to new environmental constraints and offer safe and compliant control of forces in contact. The techniques offer theoretical advantages, including convergence to a goal, non-penetration of obstacles, and passivity. The coverage of learning begins with low-level control parameters and progresses to higher-level competencies composed of combinations of skills. Learning for Adaptive and Reactive Robot Control is designed for graduate-level courses in robotics, with chapters that proceed from fundamentals to more advanced content. Techniques covered include learning from demonstration, optimization, and reinforcement learning, and using dynamical systems in learning control laws, trajectory planning, and methods for compliant and force control . Features for teaching in each chapter: applications, which range from arm manipulators to whole-body control of humanoid robots; pencil-and-paper and programming exercises; lecture videos, slides, and MATLAB code examples available on the author’s website . an eTextbook platform website offering protected material[EPS2] for instructors including solutions.

Download or read book Informatics in Control Automation and Robotics written by Giuseppina Gini and published by Springer Nature. This book was released on 2023-11-29 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses the latest endeavors relating researches and developments conducted in fields of control, robotics, and automation. Through ten revised and extended articles, the present book aims to provide the most up-to-date state-of-the-art of the aforementioned fields allowing researcher, Ph.D. students, and engineers not only updating their knowledge but also benefiting from the source of inspiration that represents the set of selected articles of the book. The deliberate intention of editors to cover as well theoretical facets of those fields as their practical accomplishments and implementations offers the benefit of gathering in a same volume a factual and well-balanced prospect of nowadays research in those topics. A special attention toward “Intelligent Robots and Control” may characterize another benefit of this book.

Download or read book Human in the loop System Design and Control Adaptation for Behavior Assistant Robots written by Yuquan Leng and published by Frontiers Media SA. This book was released on 2024-06-03 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the progress and development of human-robot systems, the coordination among humans, robots, and environments has become increasingly sophisticated. In this Research Topic, we focus on an important field in robotics and automation disciplines, which is commonly defined as behavior-assistant robots. The scope includes but is not limited to: (1) rehabilitation assistive devices, such as rigid/soft exoskeletons, prosthetic systems, orthoses, and intelligent wheelchairs; (2) intelligent medical systems, such as endoscopic robots, surgical robots, and the navigation systems; (3) industrial application devices, such as collaborative manipulators, load-bearing exoskeletons, supernumerary robotic limbs; (4) intelligent domestic devices, such as mobile robots, elderly-care robots, walking-aids robots and so on. The emergence of robot-assisted daily behaviors, based on aforementioned devices, is gradually becoming part of our social lives, which can improve weak motor abilities, enhance physical functionalities, and enable various other benefits.

Download or read book Dynamics and Control of Robotic Manipulators with Contact and Friction written by Shiping Liu and published by John Wiley & Sons. This book was released on 2018-11-15 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the friction, contact and impact on robot control and force feedback mechanism Dynamics and Control of Robotic Manipulators with Contact and Friction offers an authoritative guide to the basic principles of robot dynamics and control with a focus on contact and friction. The authors discuss problems in interaction between human and real or virtual robot where dynamics with friction and contact are relevant. The book fills a void in the literature with a need for a text that considers the contact and friction generated in robot joints during their movements. Designed as a practical resource, the text provides the information needed for task planning in view of contact, impact and friction for the designer of a robot control system for high accuracy and long durability. The authors include a review of the most up-to-date advancements in robot dynamics and control. It contains a comprehensive resource to the effective design and fabrication of robot systems and components for engineering and scientific purposes. This important guide: Offers a comprehensive reference with systematic treatment and a unified framework Includes simulation and experiments used in dynamics and control of robot considering contact, impact and friction Discusses the most current tribology methodology used to treat the multiple–scale effects Contains valuable descriptions of experiments and software used Presents illustrative accounts on the methods employed to handle friction in the closed loop, including the principles, implementation, application scope, merits and demerits Offers a cohesive treatment that covers tribology and multi-scales, multi-physics and nonlinear stochastic dynamics control Written for graduate students of robotics, mechatronics, mechanical engineering, tracking control and practicing professionals and industrial researchers, Dynamics and Control of Robotic Manipulators with Contact and Friction offers a review to effective design and fabrication of stable and durable robot system and components.

Download or read book Autonomous Agents and Multiagent Systems written by Gita Sukthankar and published by Springer. This book was released on 2017-11-24 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the most visionary papers from 10 workshops held at the International Conference on Autonomous Agents and Multiagent Systems, AAMAS 2017, held in Sao Paulo, Brazil, in May 2017. The 15 full papers presented in this volume were carefully reviewed and selected for inclusion in this volume. They deal with novel ideas proposing a change in the way research is currently carried out.

Download or read book Algorithmic Foundations of Robotics XII written by Ken Goldberg and published by Springer Nature. This book was released on 2020-05-06 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the outcomes of the 12th International Workshop on the Algorithmic Foundations of Robotics (WAFR 2016). WAFR is a prestigious, single-track, biennial international meeting devoted to recent advances in algorithmic problems in robotics. Robot algorithms are an important building block of robotic systems and are used to process inputs from users and sensors, perceive and build models of the environment, plan low-level motions and high-level tasks, control robotic actuators, and coordinate actions across multiple systems. However, developing and analyzing these algorithms raises complex challenges, both theoretical and practical. Advances in the algorithmic foundations of robotics have applications to manufacturing, medicine, distributed robotics, human–robot interaction, intelligent prosthetics, computer animation, computational biology, and many other areas. The 2016 edition of WAFR went back to its roots and was held in San Francisco, California – the city where the very first WAFR was held in 1994. Organized by Pieter Abbeel, Kostas Bekris, Ken Goldberg, and Lauren Miller, WAFR 2016 featured keynote talks by John Canny on “A Guided Tour of Computer Vision, Robotics, Algebra, and HCI,” Erik Demaine on “Replicators, Transformers, and Robot Swarms: Science Fiction through Geometric Algorithms,” Dan Halperin on “From Piano Movers to Piano Printers: Computing and Using Minkowski Sums,” and by Lydia Kavraki on “20 Years of Sampling Robot Motion.” Furthermore, it included an Open Problems Session organized by Ron Alterovitz, Florian Pokorny, and Jur van den Berg. There were 58 paper presentations during the three-day event. The organizers would like to thank the authors for their work and contributions, the reviewers for ensuring the high quality of the meeting, the WAFR Steering Committee led by Nancy Amato as well as WAFR’s fiscal sponsor, the International Federation of Robotics Research (IFRR), led by Oussama Khatib and Henrik Christensen. WAFR 2016 was an enjoyable and memorable event.

Download or read book Informatics in Control Automation and Robotics written by Oleg Gusikhin and published by Springer Nature. This book was released on 2020-12-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the latest endeavors relating researches and developments conducted in fields of control, robotics and automation. Through more than ten revised and extended articles, the present book aims to provide the most up-to-date state of the art of the aforementioned fields allowing researcher, Ph.D. students and engineers not only updating their knowledge but also benefiting from the source of inspiration that represents the set of selected articles of the book. The deliberate intention of editors to cover as well theoretical facets of those fields as their practical accomplishments and implementations offers the benefit of gathering in the same volume a factual and well-balanced prospect of nowadays research in those topics. Special attention toward “Intelligent Robots and Control” may characterize another benefit of this book.

Download or read book The DARPA Robotics Challenge Finals Humanoid Robots To The Rescue written by Matthew Spenko and published by Springer. This book was released on 2018-04-09 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DARPA Robotics Challenge was a robotics competition that took place in Pomona, California USA in June 2015. The competition was the culmination of 33 months of demanding work by 23 teams and required humanoid robots to perform challenging locomotion and manipulation tasks in a mock disaster site. The challenge was conceived as a response to the Japanese Fukushima nuclear disaster of March 2011. The Fukushima disaster was seen as an ideal candidate for robotic intervention since the risk of exposure to radiation prevented human responders from accessing the site. This volume, edited by Matthew Spenko, Stephen Buerger, and Karl Iagnemma, includes commentary by the organizers, overall analysis of the results, and documentation of the technical efforts of 15 competing teams. The book provides an important record of the successes and failures involved in the DARPA Robotics Challenge and provides guidance for future needs to be addressed by policy makers, funding agencies, and the robotics research community. Many of the papers in this volume were initially published in a series of special issues of the Journal of Field Robotics. We have proudly collected versions of those papers in this STAR volume.

Download or read book Robot Motion Planning written by Jean-Claude Latombe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the ultimate goals in Robotics is to create autonomous robots. Such robots will accept high-level descriptions of tasks and will execute them without further human intervention. The input descriptions will specify what the user wants done rather than how to do it. The robots will be any kind of versatile mechanical device equipped with actuators and sensors under the control of a computing system. Making progress toward autonomous robots is of major practical inter est in a wide variety of application domains including manufacturing, construction, waste management, space exploration, undersea work, as sistance for the disabled, and medical surgery. It is also of great technical interest, especially for Computer Science, because it raises challenging and rich computational issues from which new concepts of broad useful ness are likely to emerge. Developing the technologies necessary for autonomous robots is a formidable undertaking with deep interweaved ramifications in auto mated reasoning, perception and control. It raises many important prob lems. One of them - motion planning - is the central theme of this book. It can be loosely stated as follows: How can a robot decide what motions to perform in order to achieve goal arrangements of physical objects? This capability is eminently necessary since, by definition, a robot accomplishes tasks by moving in the real world. The minimum one would expect from an autonomous robot is the ability to plan its x Preface own motions.