Download or read book Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas written by Dobrin Toporov and published by Elsevier. This book was released on 2014-05-30 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas focuses on a niche technology, combustion of coal in an oxygen rich environment, which is one approach to obtaining 'clean coal,' by making it easier to capture carbon that is released in the combustion process. Toporov's book breaks ground on covering the key fundamentals of oxycoal technologies, which have not yet been covered in this depth. Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas summarizes the main results from a pioneering work on experimental and numerical investigations of oxyfuel technologies. It provides the theoretical background of the process, the problems to be faced, and the technical solutions that were achieved during these investigations. - Summarizes results from investigations of oxyfuel technologies performed at Aachen University, Germany - Provides theoretical background, as well as the primary problems of these technologies and how they can be solved

Download or read book Science and Engineering of Hydrogen Based Energy Technologies written by Paulo Emilio Miranda and published by Academic Press. This book was released on 2018-11-12 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Engineering of Hydrogen-Based Energy Technologies explores the generation of energy using hydrogen and hydrogen-rich fuels in fuel cells from the perspective of its integration into renewable energy systems using the most sound and current scientific knowledge. The book first examines the evolution of energy utilization and the role expected to be played by hydrogen energy technologies in the world's energy mix, not just for energy generation, but also for carbon capture, storage and utilization. It provides a general overview of the most common and promising types of fuel cells, such as PEMFCs, SOFCs and direct alcohol fuel cells. The co-production of chemical and electrolysis cells, as well as the available and future materials for fuel cells production are discussed. It then delves into the production of hydrogen from biomass, including waste materials, and from excess electricity produced by other renewable energy sources, such as solar, wind, hydro and geothermal. The main technological approaches to hydrogen storage are presented, along with several possible hydrogen energy engineering applications. Science and Engineering of Hydrogen-Based Energy Technologies's unique approach to hydrogen energy systems makes it useful for energy engineering researchers, professionals and graduate students in this field. Policy makers, energy planning and management professionals, and energy analysts can also benefit from the comprehensive overview that it provides. - Presents engineering fundamentals, commercially deployed technologies, up-and-coming developments and applications through a systemic approach - Explores the integration of hydrogen technologies in renewable energy systems, including solar, wind, bioenergy and ocean energy - Covers engineering standards, guidelines and regulations, as well as policy and social aspects for large-scale deployment of these technologies

Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 2007-12-21 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.

Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 1995-06-13 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE) was given a mandate in the 1992 Energy Policy Act (EPACT) to pursue strategies in coal technology that promote a more competitive economy, a cleaner environment, and increased energy security. Coal evaluates DOE's performance and recommends priorities in updating its coal program and responding to EPACT. This volume provides a picture of likely future coal use and associated technology requirements through the year 2040. Based on near-, mid-, and long-term scenarios, the committee presents a framework for DOE to use in identifying R&D strategies and in making detailed assessments of specific programs. Coal offers an overview of coal-related programs and recent budget trends and explores principal issues in future U.S. and foreign coal use. The volume evaluates DOE Fossil Energy R&D programs in such key areas as electric power generation and conversion of coal to clean fuels. Coal will be important to energy policymakers, executives in the power industry and related trade associations, environmental organizations, and researchers.

Download or read book Combined Cycle Systems for Near Zero Emission Power Generation written by Ashok D Rao and published by Elsevier. This book was released on 2012-04-12 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined cycle power plants are one of the most promising ways of improving fossil-fuel and biomass energy production. The combination of a gas and steam turbine working in tandem to produce power makes this type of plant highly efficient and allows for CO2 capture and sequestration before combustion. This book provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants.After introductory chapters on basic combined cycle power plant and advanced gas turbine design, the book reviews the main types of combined cycle system. Chapters discuss the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) and integrated gasification combined cycle (IGCC) as well as novel humid air cycle, oxy-combustion turbine cycle systems. The book also reviews pressurised fluidized bed combustion (PFBC), externally fired combined cycle (EFCC), hybrid fuel cell turbine (FC/GT), combined cycle and integrated solar combined cycle (ISCC) systems. The final chapter reviews techno-economic analysis of combined cycle systems.With its distinguished editor and international team of contributors, Combined cycle systems for near-zero emission power generation is a standard reference for both industry practitioners and academic researchers seeking to improve the efficiency and environmental impact of power plants. - Provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants - Introduces basic combined cycle power plant and advanced gas turbine design and reviews the main types of combined cycle systems - Discusses the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) systems and integrated gasification combined cycle (IGCC) systems, as well as novel humid air cycle systems and oxy-combustion turbine cycle systems

Download or read book Coal Fired Generation written by Paul Breeze and published by Academic Press. This book was released on 2015-07-17 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal-Fired Generation is a concise, up-to-date and readable guide providing an introduction to this traditional power generation technology. It includes detailed descriptions of coal fired generation systems, demystifies the coal fired technology functions in practice as well as exploring the economic and environmental risk factors. Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide, to help establish a reliable power supply address social and economic objectives. - Focuses on the evolution of the traditional coal-fired generation - Evaluates the economic and environmental viability of the system with concise diagrams and accessible explanations

Download or read book Energy Systems written by Nick Jenkins and published by . This book was released on 2019 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy supply is foundational to modern society, but damaging to the environment. This book takes a 'systems view', from extraction of primary fuel, through conversion to usable energy, and transportation to point of use. It explores initiatives to generate electricity in an environmentally benign manner, and decarbonise the supply of energy.

Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. - Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies - Reviews the current status and future developments of key technologies involved in IGCC plants - Provides several case studies of existing IGCC plants around the world

Download or read book Synthesis Gas Combustion written by Tim Lieuwen and published by CRC Press. This book was released on 2009-09-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal, still used to generate more than half of the electric power in the U.S., will likely be part of any future global energy plan. But this finite resource is also responsible for 80 percent of the CO2 emissions from power production, and its continued use will require improved processing techniques that are less damaging to the environment and l

Download or read book Combustion Ash Residue Management written by Richard W. Goodwin and published by William Andrew. This book was released on 2013-12-05 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Ash and Residue Management assists owners and operators of Coal-fired and Resource Recovery Power Plants. By applying the principles and reviewing the case studies examples described within this book, accidents and upsets can be avoided and regulatory permitting can be achieved – reducing costs. This unique book is an essential reference for anybody responsible for disposal or utilization of combustion residues. It reflects over 30 years of engineering practice, applying the principles of concrete chemistry and civil engineering/soil mechanics as confirmed by field data. Dr. Richard Goodwin assesses the composition and environmental impact of combustion residues, and provides not only best practices for safe disposal, but also a blueprint for effective reuse, including applications like structural fill, grout, and capping material. Case studies and cost information for ash disposal options are included, in addition to the lessons learned by high-profile failures, such as the TVA Kingston fossil plant coal fly ash slurry spill in 2008. It also applies engineering principles to discuss how to avoid future upsets, including better operator training and monitoring methods. - A comprehensive update to reflect changes in legislation and practice, including new material on the safe disposal or beneficial use of coal ash - A straightforward engineering approach, providing practical guidance and field data - Written by an established expert in the field

Download or read book Clean and Efficient Coal fired Power Plants written by Heinz Termuehlen and published by American Society of Mechanical Engineers. This book was released on 2003 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the evolution toward advanced coal-fired power plants. Advanced power plants with an efficiency level of 45% are today commercially available and even more efficient plants are in their development phase. Considering that presently many pulverized coal-fired power plants operate with an efficiency of about 32%, an improvement of more than 40% specific coal consumption and CO2 discharge can be achieved. Before trying to apply as a secondary measure the use of carbon sequestration, it seems that this 40% specific CO2 discharge reduction as a primary measure can much easier be achieved. The effect of power generation on the environment can be drastically improved by the use of flue gas cleanup systems in advanced pulverized coal-fired power plants (SO2 emission reduction from 40 to 1.4 lb/MWh and NOx emission reduction from 7.5 to 0.64 lb/MWh). With an increased number of coal-fired plants, CO2 discharge and emissions can be reduced, even with an increase of electric power generation in the US by 38% over the next 20 years. Even though the book concentrates on pulverized coal-fired power plants, it also discusses and compares other options like fluidized-bed combustion and coal gasification.

Download or read book Biomass Energy with Carbon Capture and Storage BECCS written by Clair Gough and published by John Wiley & Sons. This book was released on 2018-09-24 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for understanding the potential role for biomass energy with carbon capture and storage in addressing climate change Biomass Energy with Carbon Capture and Storage (BECCS) offers a comprehensive review of the characteristics of BECCS technologies in relation to its various applications. The authors — a team of expert professionals — bring together in one volume the technical, scientific, social, economic and governance issues relating to the potential deployment of BECCS as a key approach to climate change mitigation. The text contains information on the current and future opportunities and constraints for biomass energy, explores the technologies involved in BECCS systems and the performance characteristics of a variety of technical systems. In addition, the text includes an examination of the role of BECCS in climate change mitigation, carbon accounting across the supply chain and policy frameworks. The authors also offer a review of the social and ethical aspects as well as the costs and economics of BECCS. This important text: Reveals the role BECCS could play in the transition to a low-carbon economy Discusses the wide variety of technical and non-technical constraints of BECCS Presents the basics of biomass energy systems Reviews the technical and engineering issues pertinent to BECCS Explores the societal implications of BECCS systems Written for academics and research professionals, Biomass Energy with Carbon Capture and Storage (BECCS) brings together in one volume the issues surrounding BECCS in an accessible and authoritative manner.

Download or read book Coal Combustion Products CCPs written by Tom Robl and published by Woodhead Publishing. This book was released on 2017-05-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal Combustion Products (CCPs): Their Nature, Utilization and Beneficiation is a valuable resource for engineers and scientists from the coal, cement, concrete, and construction industries seeking an in-depth guide to the characteristics, utilization, beneficiation, and environmental impacts of coal combustion by-products. Researchers in universities working in this area will also find much to expand their knowledge. The book provides a detailed overview of the different waste materials produced during power generation from coal, exploring their nature, beneficiation techniques, applications, and environmental impacts. Strong focus is placed on coal fly ash, bottom ash, and flue gas desulfurization materials, and their employment in cement, concrete, gypsum products, aggregates, road construction, geotechnics, and agriculture, among other products and industries. Part 1 focuses on the nature of coal ashes, with chapters on their origin, generation, and storage, both in ponds and landfill. The coal combustion by-products produced as a result of clean coal technologies are the focus of the final chapter in the section. The next group of chapters in Part 2 considers the utilization of different waste materials, including the key products coal fly ash, bottom ash, and flue gas desulfurization materials. This is followed by a contribution reviewing the latest research into innovative and advanced uses for coal ash. After an introduction to ash quality problems and quality monitoring, Part 3 concentrates on the essential area of by-product beneficiation techniques, in other words how to maximize the quality of materials for the end user. Topics covered include separation methods, thermal processing, and chemical passivation. The final section of the book addresses environmental issues, including the use of coal combustion by-products in green construction materials and the essential health and safety considerations associated with their use.

Download or read book Coal Combustion Byproducts and Environmental Issues written by Kenneth S. Sajwan and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal Combustion Byproducts and Environmental Issues addresses the major implications and critical issues surrounding coal combustion products and their impact upon the environment. It provides essential information for scientists conducting research on coal and coal combustion products, but also serves as a valuable reference for a wide variety of researchers and other professionals in the energy industry and in the fields of public health, engineering, and environmental sciences. The ultimate goal of this volume is to benefit both our economy and our environment as humanity enters the second half of the fossil fuel era.

Download or read book Future Energy written by Trevor Letcher and published by Elsevier. This book was released on 2008-07-30 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future Energy will allow us to make reasonable, logical and correct decisions on our future energy as a result of two of the most serious problems that the civilized world has to face; the looming shortage of oil (which supplies most of our transport fuel) and the alarming rise in atmospheric carbon dioxide over the past 50 years (resulting from the burning of oil, gas and coal and the loss of forests) that threatens to change the world's climate through global warming. Future Energy focuses on all the types of energy available to us, taking into account a future involving a reduction in oil and gas production and the rapidly increasing amount of carbon dioxide in our atmosphere. It is unique in the genre of books of similar title in that each chapter has been written by a scientist or engineer who is an expert in his or her field. The book is divided into four sections: - Traditional Fossil Fuel and Nuclear Energy - Renewable Energy - Potentially Important New Types of Energy - New Aspects to Future Energy Usage Each chapter highlights the basic theory and implementation, scope, problems and costs associated with a particular type of energy. The traditional fuels are included because they will be with us for decades to come - but, we hope, in a cleaner form. The renewable energy types includes wind power, wave power, tidal energy, two forms of solar energy, bio-mass, hydroelectricity, geothermal and the hydrogen economy. Potentially important new types of energy include: pebble bed nuclear reactors, nuclear fusion, methane hydrates and recent developments in fuel cells and batteries. - Written by experts in the key future energy disciplines from around the globe - Details of all possible forms of energy that are and will be available globally in the next two decades - Puts each type of available energy into perspective with realistic, future options

Download or read book Boilers and Burners written by Prabir Basu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: A joint effort of three continents, this book is about rational utilization of the fossil fuels for generation of heat or power. It provides a synthesis of two scientific traditions: the high-performance, but often proprietary, Western designs, and the elaborate national standards based on less advanced Eastern designs; it presents both in the same Western format. It is intended for engineers and advanced undergraduate and graduate students with an interest in steam power plants, burners, or furnaces. The text uses a format of practice based on theory: each chapter begins with an explanation of a process, with basic theory developed from first principles; then empirical relationships are presented and, finally, design methods are explained by worked out examples. It will thus provide researchers with a resource for applications of theory to practice. Plant operators will find solutions to and explanations of many of their daily operational problems. Designers will find this book ready with required data, design methods and equations. Finally, consultants will find it very useful for design evaluation.

Download or read book Clean Coal Engineering Technology written by Bruce G. Miller and published by Elsevier. This book was released on 2010-11-15 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern over the effects of airborne pollution, green house gases, and the impact of global warming has become a worldwide issue that transcends international boundaries, politics, and social responsibility. The 2nd Edition of Coal Energy Systems: Clean Coal Technology describes a new generation of energy processes that sharply reduce air emissions and other pollutants from coal-burning power plants. Coal is the dirtiest of all fossil fuels. When burned, it produces emissions that contribute to global warming, create acid rain, and pollute water. With all of the interest and research surrounding nuclear energy, hydropower, and biofuels, many think that coal is finally on its way out. However, coal generates half of the electricity in the United States and throughout the world today. It will likely continue to do so as long as it's cheap and plentiful [Source: Energy Information Administration]. Coal provides stability in price and availability, will continue to be a major source of electricity generation, will be the major source of hydrogen for the coming hydrogen economy, and has the potential to become an important source of liquid fuels. Conservation and renewable/sustainable energy are important in the overall energy picture, but will play a lesser role in helping us satisfy our energy demands today. Dramatically updated to meet the needs of an ever changing energy market, Coal Energy Systems, 2nd Edition is a single source covering policy and the engineering involved in implementing that policy. The book addresses many coal-related subjects of interest ranging from the chemistry of coal and the future engineering anatomy of a coal fired plant to the cutting edge clean coal technologies being researched and utilized today. A 50% update over the first edition, this new book contains new chapters on processes such as CO2 capture and sequestration, Integrated Gasification Combined Cycle (IGCC) systems, Pulverized-Coal Power Plants and Carbon Emission Trading. Existing materials on worldwide coal distribution and quantities, technical and policy issues regarding the use of coal, technologies used and under development for utilizing coal to produce heat, electricity, and chemicals with low environmental impact, vision for utilizing coal well into the 21st century, and the security coal presents. - Clean Liquids and Gaseous Fuels from Coal for Electric Power - Integrated Gasification Combined Cycle (IGCC) systems - Pulverized-Coal Power Plants - Advanced Coal-Based Power Plants - Fluidized-Bed Combustion Technology - CO2 capture and sequestration