Download or read book Coloring of Plastics written by Robert A. Charvat and published by John Wiley & Sons. This book was released on 2003-11-24 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This latest edition of Coloring of Plastics: Fundamentals offers an updated introduction to color as a science while also providing the foundation for many additional technological subjects. The basic families of colorants are described, along with their properties. The material examines how statistical analysis can improve the consistency of colored polymer production runs as well as the colorants used to match the color. Other important topics covered in Coloring of Plastics: Fundamentals, Second Edition include: * Environmental issues and the reuse of discarded material * Potential problems with the interaction between colorants and other additives * Measurement information and matching, visually and instrumentally * Techniques for incorporating colorants into polymers as compounds or concentrates * Special effect colorants Polymer and colorant manufacturers, plastics compounders, and coating and synthetic fiber industries will acquire an enhanced appreciation of the complex technological issues a colorist must consider if a plastics coloring project is to succeed.
Download or read book Coloring of Plastics written by Albrecht Müller and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2012-11-12 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The successful coloring of plastic parts, beginning with the formulation of the color preparation and ending with the manufacture of the final product, is the result of the interaction of chemical, physical, and technological factors. In-depth knowledge of these factors and their interrelation and the consideration of national and international regulations are prerequisite for anyone working in this field. This book describes the various aspects of coloring plastics. The reader is enabled to identify the color preparation that meets given product requirements. Only if color preparation, polymer material, and final product design and requirements are well coordinated will the customer be pleased with the colored plastic product. Contents: - Methods for Coloring of Plastics - Requirements for Color Preparations - Composition of Color Preparations - Colorants and Additives - Processing Errors and Troubleshooting - Quality Assurance - National/International Regulations
Download or read book Coloring of Plastics written by Robert A. Charvat and published by John Wiley & Sons. This book was released on 2005-02-25 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This latest edition of Coloring of Plastics: Fundamentals offers an updated introduction to color as a science while also providing the foundation for many additional technological subjects. The basic families of colorants are described, along with their properties. The material examines how statistical analysis can improve the consistency of colored polymer production runs as well as the colorants used to match the color. Other important topics covered in Coloring of Plastics: Fundamentals, Second Edition include: * Environmental issues and the reuse of discarded material * Potential problems with the interaction between colorants and other additives * Measurement information and matching, visually and instrumentally * Techniques for incorporating colorants into polymers as compounds or concentrates * Special effect colorants Polymer and colorant manufacturers, plastics compounders, and coating and synthetic fiber industries will acquire an enhanced appreciation of the complex technological issues a colorist must consider if a plastics coloring project is to succeed.
Download or read book Coloring Technology for Plastics written by Ronald M. Harris and published by William Andrew. This book was released on 1999-12-31 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this anthology were presented during seven ANTEC and RETEC symposia between 1995 and 1998, and chronicle many of the advances in the plastics coloring technology field during that time span. The unifying theme of the papers is ""creating more value."" The interactivity of the package design process has continued to demand advances in coloring technology, and the value of being able to exploit product appearance is glaringly apparent. Another way to create value is by being responsive through ""Speed to Market."" Manufacturers and suppliers have to respond to the demand of their consumers, yet fabricators cannot be ignored in their desire for first run acceptance of color. All these issues and many others are discussed within this authoritative overview of coloring technology.
Download or read book Coloring of Plastics written by Albrecht Müller (Dr. rer. nat.) and published by . This book was released on 2003 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coloring of Plastics written by Robert Charvat and published by John Wiley & Sons Incorporated. This book was released on 2013-05-21 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.
Download or read book Coloring of Plastics written by Mukhtar Ahmed and published by Van Nostrand Reinhold Company. This book was released on 1979 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coloring of Plastics written by Thomas G. Webber and published by Wiley-Interscience. This book was released on 1979-08-31 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference work on the subject. Presents much unpublished information, reflecting the expertise of 17 contributors. Provides a concise, comprehensive exposition on color; discusses role of pigments; contains an exhaustive table of dyes, including specific advantages and limitations; covers dispersion methods. Individual resins are analyzed chemically and practically, with SI units used throughout. Intended for those unfamiliar with chemistry and new to the field; as an indispensable reference for chemists and technicians in the field; for designers and researchers in plastics, pigments and dyes; salesmen, and manufacturers.
Download or read book Coloring of Plastics III written by Society of Plastics Engineers. Palisades Section and published by . This book was released on 1966 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coloring of Plastics V written by and published by . This book was released on 1971* with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coloring of Plastics VI written by and published by . This book was released on 1972* with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book True Roots written by Ronnie Citron-Fink and published by . This book was released on 2019-06-04 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like 75% of American women, Ronnie Citron-Fink colored her hair. Yet as an environmental journalist, she knew all those unpronounceable chemical names on the back of the hair dye box were far from safe. So Ronnie decided to ditch the dye and go in search of answers. What are the risks of hair dye? Are there safer alternatives? Will I still feel like me when I have gray hair? True Roots follows her journey from dark dyes to a silver crown of glory, from fear of aging to embracing natural beauty. Along the way, women of all ages can learn to protect themselves from dangerous products and discover a new hair story--one built on individuality, health, and truth.
Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues
Download or read book Coloring of Plastics IV written by Society of Plastics Engineers. Regional Technical Conference and published by . This book was released on 1969 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Colorants for Plastics written by Ian Christensen and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: At a time when it is critical to many plastics processors to add value to products, colorants are an essential part of the additives repertoire. Plastics are often processed at very high temperatures and shear, and products are exposed to heat and light. Colorants must tolerate these conditions to function adequately. This Rapra Review Report provides practical information for plastics processors with regard to colorant selection and the range of products and effects available. The review is accompanied by around 400 abstracts from the Rapra Polymer Library database, to facilitate further reading on this subject.
Download or read book Coloring of Plastics XII Automotive Color written by Society of Plastics Engineers. Ohio Firelands Section and published by . This book was released on 1978 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:
