Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Dynamic Fracture written by K. Ravi-Chandar and published by Elsevier. This book was released on 2004-10-16 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic fracture in solids has attracted much attention for over a century from engineers as well as physicists due both to its technological interest and to inherent scientific curiosity. Rapidly applied loads are encountered in a number of technical applications. In some cases such loads might be applied deliberately, as for example in problems of blasting, mining, and comminution or fragmentation; in other cases, such dynamic loads might arise from accidental conditions. Regardless of the origin of the rapid loading, it is necessary to understand the mechanisms and mechanics of fracture under dynamic loading conditions in order to design suitable procedures for assessing the susceptibility to fracture. Quite apart from its repercussions in the area of structural integrity, fundamental scientific curiosity has continued to play a large role in engendering interest in dynamic fracture problems In-depth coverage of the mechanics, experimental methods, practical applications Summary of material response of different materials Discussion of unresolved issues in dynamic fracture
Download or read book Atomistic Modeling of Materials Failure written by Markus J. Buehler and published by Springer Science & Business Media. This book was released on 2008-08-07 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introduction to molecular and atomistic modeling techniques applied to fracture and deformation of solids, focusing on a variety of brittle, ductile, geometrically confined and biological materials. The overview includes computational methods and techniques operating at the atomic scale, and describes how these techniques can be used to model cracks and other deformation mechanisms. The book aims to make new molecular modeling techniques available to a wider community.
Download or read book Treatise on Geophysics written by and published by Elsevier. This book was released on 2015-04-17 with total page 5604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Geophysics, Second Edition, is a comprehensive and in-depth study of the physics of the Earth beyond what any geophysics text has provided previously. Thoroughly revised and updated, it provides fundamental and state-of-the-art discussion of all aspects of geophysics. A highlight of the second edition is a new volume on Near Surface Geophysics that discusses the role of geophysics in the exploitation and conservation of natural resources and the assessment of degradation of natural systems by pollution. Additional features include new material in the Planets and Moon, Mantle Dynamics, Core Dynamics, Crustal and Lithosphere Dynamics, Evolution of the Earth, and Geodesy volumes. New material is also presented on the uses of Earth gravity measurements. This title is essential for professionals, researchers, professors, and advanced undergraduate and graduate students in the fields of Geophysics and Earth system science. Comprehensive and detailed coverage of all aspects of geophysics Fundamental and state-of-the-art discussions of all research topics Integration of topics into a coherent whole
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2002 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Multiscale Modeling of Fluids and Solids written by Martin Oliver Steinhauser and published by Springer. This book was released on 2016-11-29 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of the book is to provide a comprehensive overview of computational physics methods and techniques, that are used for materials modeling on different length and time scales. Each chapter first provides an overview of the basic physical principles which are the basis for the numerical and mathematical modeling on the respective length-scale. The book includes the micro-scale, the meso-scale and the macro-scale, and the chapters follow this classification. The book explains in detail many tricks of the trade of some of the most important methods and techniques that are used to simulate materials on the perspective levels of spatial and temporal resolution. Case studies are included to further illustrate some methods or theoretical considerations. Example applications for all techniques are provided, some of which are from the author’s own contributions to some of the research areas. The second edition has been expanded by new sections in computational models on meso/macroscopic scales for ocean and atmosphere dynamics. Numerous applications in environmental physics and geophysics had been added.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2001 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Models and Phenomena in Fracture Mechanics written by Leonid I. Slepyan and published by Springer Science & Business Media. This book was released on 2012-11-07 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the most important results, methods, and open questions, this book describes and compares advanced models in fracture mechanics. The author introduces the required mathematical technique, mainly the theory of analytical functions, from scratch.
Download or read book Defect and Material Mechanics written by C. Dascalu and published by Springer Science & Business Media. This book was released on 2008-03-26 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents recent developments in the theory of defects and the mechanics of material forces. Most of the contributions were presented at the International Symposium on Defect and Material Forces (ISDMM2007), held in Aussois, France, March 2007.
Download or read book Elastodynamics written by A.C. Eringen and published by Рипол Классик. This book was released on 1974 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the inception of the theory of elasticity with Navier A821) and Cauchy A828), the dynamical problems of elasticity and the subject of wave propagations in elastic solids have been under intense study by a large number of workers. In fact the literature is so extensive that any desire to write accounts on the subject immediately induces discouragement on the part of a prospective author. For it is impossible to do justice to all aspects of this wide field in any one- or two-volume treatise. Perhaps, partially, it is this concern that kept this important field barren of books for nearly two centuries.
Download or read book Proceedings of the ASME Applied Mechanics Division written by and published by . This book was released on 2007 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Treatise on Geophysics Earthquake seismology written by Gerald Schubert and published by . This book was released on 2007 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Treatise on geophysics is the only comprehensive, state-of-the-art, and integrated summary of the present state of geophysics. Offering an array of articles from some of the top scientists around the world, this 11-volume work deals with all major parts of solid-Earth geophysics, including a volume on the terrestrial planets and moons in our Solar System. This major reference work will aid researchers, advanced undergrad and graduate students, as well as professionals in cutting-edge research.
Download or read book Earthquake Early Warning Systems written by Paolo Gasparini and published by Springer Science & Business Media. This book was released on 2007-08-10 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides information on the major EEW systems in operation and on the state-of-the-art of the different blocks forming an EW system: the rapid detection and estimation of the earthquake’s focal parameters, the signal transmission, the engineering interface and the information reliability/false alarm problem. It is the first time that so many aspects of EEW systems have been specifically focused upon within a single book.
Download or read book Dynamic Fracture Mechanics written by Arun Shukla and published by World Scientific. This book was released on 2006 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide variety of topics in dynamic fracture mechanics, this volume presents state-of-the-art experimental techniques and theoretical analysis on dynamic fracture in standard and exotic materials. Written by world renowned researchers, this valuable compendium contains eleven chapters on crack initiation, crack propagation, crack arrest, crack-stress wave interactions, and experimental, analytical and numerical methods in dynamic fracture mechanics. Contents: Modeling Dynamic Fracture Using Large-Scale Atomistic Simulations (H-J Gao & M J Buehler); Dynamic Crack Initiation Toughness (D Rittel); The Dynamics of Rapidly Moving Tensile Cracks in Brittle Amorphous Material (J Fineberg); Optical Methods for Dynamic Fracture Mechanics (H V Tippur); On the Use of Strain Gages in Dynamic Fracture (V Parameswaran & A Shukla); Dynamic and Crack Arrest Fracture Toughness (R E Link & R Chona); Dynamic Fracture in Graded Materials (A Shukla & N Jain); Dynamic Fracture Initiation Toughness at Elevated Temperatures with Application to the New Generation of Titanium Aluminides Alloys (M Shazly et al.); Dynamic Fracture of Nanocomposite Materials (A Shukla et al.). Readership: Researchers, practitioners, and graduate students in fracture mechanics and materials science.
Download or read book Extended Finite Element Method written by Zhuo Zhuang and published by Academic Press. This book was released on 2014-03-24 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extended Finite Element Method provides an introduction to the extended finite element method (XFEM), a novel computational method which has been proposed to solve complex crack propagation problems. The book helps readers understand the method and make effective use of the XFEM code and software plugins now available to model and simulate these complex problems. The book explores the governing equation behind XFEM, including level set method and enrichment shape function. The authors outline a new XFEM algorithm based on the continuum-based shell and consider numerous practical problems, including planar discontinuities, arbitrary crack propagation in shells and dynamic response in 3D composite materials. - Authored by an expert team from one of China's leading academic and research institutions - Offers complete coverage of XFEM, from fundamentals to applications, with numerous examples - Provides the understanding needed to effectively use the latest XFEM code and software tools to model and simulate dynamic crack problems
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 2000 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Virtual Crack Closure Technique History Approach and Applications written by Ronald Krueger and published by . This book was released on 2002 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the virtual crack closure technique is presented. The approach used is discussed, the history summarized, and insight into its applications provided. Equations for two-dimensional quadrilateral elements with linear and quadratic shape functions are given. Formula for applying the technique in conjuction with three-dimensional solid elements as well as plate/shell elements are also provided. Necessary modifications for the use of the method with geometrically nonlinear finite element analysis and corrections required for elements at the crack tip with different lengths and widths are discussed. The problems associated with cracks or delaminations propagating between different materials are mentioned briefly, as well as a strategy to minimize these problems. Due to an increased interest in using a fracture mechanics based approach to assess the damage tolerance of composite structures in the design phase and during certification, the engineering problems selected as examples and given as references focus on the application of the technique to components made of composite materials.
