Download or read book Turbulence Coherent Structures Dynamical Systems and Symmetry written by Philip Holmes and published by Cambridge University Press. This book was released on 2012-02-23 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes methods revealing the structures and dynamics of turbulence for engineering, physical science and mathematics researchers working in fluid dynamics.
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
Download or read book Journal of Vibration Testing and System Dynamics written by Jan Awrejcewicz and published by L& H Scientific Publishing. This book was released on 2018-07-01 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration Testing and System Dynamics is an interdisciplinary journal serving as the forum for promoting dialogues among engineering practitioners and research scholars. As the platform for facilitating the synergy of system dynamics, testing, design, modeling, and education, the journal publishes high-quality, original articles in the theory and applications of dynamical system testing. The aim of the journal is to stimulate more research interest in and attention for the interaction of theory, design, and application in dynamic testing. Manuscripts reporting novel methodology design for modelling and testing complex dynamical systems with nonlinearity are solicited. Papers on applying modern theory of dynamics to real-world issues in all areas of physical science and description of numerical investigation are equally encouraged. Progress made in the following topics are of interest, but not limited, to the journal: Vibration testing and designDynamical systems and controlTesting instrumentation and controlComplex system dynamics in engineeringDynamic failure and fatigue theoryChemical dynamics and bio-systemsFluid dynamics and combustionPattern dynamicsNetwork dynamicsPlasma physics and plasma dynamicsControl signal synchronization and trackingBio-mechanical systems and devicesStructural and multi-body dynamicsFlow or heat-induced vibrationMass and energy transfer dynamicsWave propagation and testing
Download or read book Unsteady Combustor Physics written by Tim C. Lieuwen and published by Cambridge University Press. This book was released on 2012-08-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing clean, sustainable energy systems is a pre-eminent issue of our time. Most projections indicate that combustion-based energy conversion systems will continue to be the predominant approach for the majority of our energy usage. Unsteady combustor issues present the key challenge associated with the development of clean, high-efficiency combustion systems such as those used for power generation, heating or propulsion applications. This comprehensive study is unique, treating the subject in a systematic manner. Although this book focuses on unsteady combusting flows, it places particular emphasis on the system dynamics that occur at the intersection of the combustion, fluid mechanics and acoustic disciplines. Individuals with a background in fluid mechanics and combustion will find this book to be an incomparable study that synthesises these fields into a coherent understanding of the intrinsically unsteady processes in combustors.
Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.
Download or read book Modern Research Topics in Aerospace Propulsion written by Gianfranco Angelino and published by Springer Science & Business Media. This book was released on 1991-03-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, published in honor of Professor Corrado Casci, celebrates the life of a very distinguished international figure devoted to sCientific study, research, teaching, and leadership. The numerous contributions of Corrado CasCi are widely admired by scientists and engineers around the globe. He has been an impressive model and outstanding colleague to many researchers. Unfortunately, only a few of them could be invited to contribute to this honorific volume. Everyone of the invited contributors responded with enthusiasm. v Corrado Casci Contents Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX Curriculum Vitae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Xl Publications of Corrado Casci . . . . . . . . . . . . . . . . . . . . . . . . . . . xix . . . . . . . . . I. Combustion 1. Mechanics of Turbulent Flow in Combustors for Premixed Gases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 A. K. OPPENHEIM 2. A Pore-Structure-Independent Combustion Model for Porous Media with Application to Graphite Oxidation 19 M. B. RICHARDS AND S. S. PENNER 3. Stabilization of Hydrogen-Air Flames in Supersonic Flow. . 37 G. WINTERFELD 4. Thermodynamics of Refractory Material Formation by Combustion Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . 49 I. GLASSMAN, K. BREZINSKY, AND K. A. DAVIS 5. Catalytic Combustion Processes . . . . . . . . . . . . . . . . . . . . . . 63 A. P. GLASKOVA 6. Stability of Ignition Transients of Reactive Solid Mixtures 83 V. E. ZARKO 7. Combustion Modeling and Stability of Double-Base Solid Rocket Propellants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 L. DE LUCA AND L. GALFETTI 8. Combustion Instabilities and Rayleigh's Criterion 135 F. E. C. CULICK II. Liquid Sprays 9. On the Anisotropy of Drop and Particle Velocity Fluctuations in Two-Phase Round Gas Jets . . . . . . . . . . . . . 155 A. TOMBOULIDES, M. l ANDREWS, AND F. V. BRACCO vii viii Contents 10.
Download or read book Combustion Noise written by Anna Schwarz and published by Springer Science & Business Media. This book was released on 2009-06-17 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: November, 2008 Anna Schwarz, Johannes Janicka In the last thirty years noise emission has developed into a topic of increasing importance to society and economy. In ?elds such as air, road and rail traf?c, the control of noise emissions and development of associated noise-reduction techno- gies is a central requirement for social acceptance and economical competitiveness. The noise emission of combustion systems is a major part of the task of noise - duction. The following aspects motivate research: • Modern combustion chambers in technical combustion systems with low pol- tion exhausts are 5 - 8 dB louder compared to their predecessors. In the ope- tional state the noise pressure levels achieved can even be 10-15 dB louder. • High capacity torches in the chemical industry are usually placed at ground level because of the reasons of noise emissions instead of being placed at a height suitable for safety and security. • For airplanes the combustion emissions become a more and more important topic. The combustion instability and noise issues are one major obstacle for the introduction of green technologies as lean fuel combustion and premixed burners in aero-engines. The direct and indirect contribution of combustion noise to the overall core noise is still under discussion. However, it is clear that the core noise besides the fan tone will become an important noise source in future aero-engine designs. To further reduce the jet noise, geared ultra high bypass ratio fans are driven by only a few highly loaded turbine stages.
Download or read book Thermoacoustic Instability written by R. I. Sujith and published by Springer Nature. This book was released on 2021-12-14 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically presents the consolidated findings of the phenomenon of self-organization observed during the onset of thermoacoustic instability using approaches from dynamical systems and complex systems theory. Over the last decade, several complex dynamical states beyond limit cycle oscillations such as quasiperiodicity, frequency-locking, period-n, chaos, strange non-chaos, and intermittency have been discovered in thermoacoustic systems operated in laminar and turbulent flow regimes. During the onset of thermoacoustic instability in turbulent systems, an ordered acoustic field and large coherent vortices emerge from the background of turbulent combustion. This emergence of order from disorder in both temporal and spatiotemporal dynamics is explored in the contexts of synchronization, pattern formation, collective interaction, multifractality, and complex networks. For the past six decades, the spontaneous emergence of large amplitude, self-sustained, tonal oscillations in confined combustion systems, characterized as thermoacoustic instability, has remained one of the most challenging areas of research. The presence of such instabilities continues to hinder the development and deployment of high-performance combustion systems used in power generation and propulsion applications. Even with the advent of sophisticated measurement techniques to aid experimental investigations and vast improvements in computational power necessary to capture flow physics in high fidelity simulations, conventional reductionist approaches have not succeeded in explaining the plethora of dynamical behaviors and the associated complexities that arise in practical combustion systems. As a result, models and theories based on such approaches are limited in their application to mitigate or evade thermoacoustic instabilities, which continue to be among the biggest concerns for engine manufacturers today. This book helps to overcome these limitations by providing appropriate methodologies to deal with nonlinear thermoacoustic oscillations, and by developing control strategies that can mitigate and forewarn thermoacoustic instabilities. The book is also beneficial to scientists and engineers studying the occurrence of several other instabilities, such as flow-induced vibrations, compressor surge, aeroacoustics and aeroelastic instabilities in diverse fluid-mechanical environments, to graduate students who intend to apply dynamical systems and complex systems approach to their areas of research, and to physicists who look for experimental applications of their theoretical findings on nonlinear and complex systems.
Download or read book Coherent Structures in Complex Systems written by D. Reguera and published by Springer. This book was released on 2008-01-11 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: A rich variety of real-life physical problems which are still poorly understood are of a nonlinear nature. Examples include turbulence, granular flows, detonations and flame propagation, fracture dynamics, and a wealth of new biological and chemical phenomena which are being discovered. Particularly interesting among the manifestations of nonlinearity are coherent structures. This book contains reviews and contributions reporting on the state of the art regarding the role of coherent structures and patterns in nonlinear science.
Download or read book Recent Advances in Combustion Modelling written by Bernard Larrouturou and published by World Scientific. This book was released on 1991 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the contributions of six world experts to a course on combustion modelling. Therefore, a pedagogical effort has been made in writing up these texts, which cover state of the art advances in most aspects of combustion science. The book is aimed at students, researches and engineers, as was the course.
Download or read book Navier Stokes Turbulence written by Wolfgang Kollmann and published by Springer Nature. This book was released on 2019-11-21 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves as a core text for graduate courses in advanced fluid mechanics and applied science. It consists of two parts. The first provides an introduction and general theory of fully developed turbulence, where treatment of turbulence is based on the linear functional equation derived by E. Hopf governing the characteristic functional that determines the statistical properties of a turbulent flow. In this section, Professor Kollmann explains how the theory is built on divergence free Schauder bases for the phase space of the turbulent flow and the space of argument vector fields for the characteristic functional. Subsequent chapters are devoted to mapping methods, homogeneous turbulence based upon the hypotheses of Kolmogorov and Onsager, intermittency, structural features of turbulent shear flows and their recognition.
Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book Swirl Flows written by Ashwani K. Gupta and published by Routledge. This book was released on 1984 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prandtl s Essentials of Fluid Mechanics written by Herbert Oertel and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an update and extension of the classic textbook by Ludwig Prandtl, Essentials of Fluid Mechanics. It is based on the 10th German edition with additional material included. Chapters on wing aerodynamics, heat transfer, and layered flows have been revised and extended, and there are new chapters on fluid mechanical instabilities and biomedical fluid mechanics. References to the literature have been kept to a minimum, and the extensive historical citations may be found by referring to previous editions. This book is aimed at science and engineering students who wish to attain an overview of the various branches of fluid mechanics. It will also be useful as a reference for researchers working in the field of fluid mechanics.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Jets written by N. Rajaratnam and published by Elsevier. This book was released on 1976-01-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent Jets
