Download or read book Cody s Data Cleaning Techniques Using SAS Third Edition written by Ron Cody and published by SAS Institute. This book was released on 2017-03-15 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in Ron Cody's signature informal, tutorial style, this book develops and demonstrates data cleaning programs and macros that you can use as written or modify which will make your job of data cleaning easier, faster, and more efficient. --

Download or read book Cody s Data Cleaning Techniques Using SAS Second Edition written by Ron Cody and published by . This book was released on 2015 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated for SAS 9, Cody's Data Cleaning Techniques Using SAS, Second Edition, addresses tasks that nearly every SAS programmer needs to do - that is, make sure that data errors are located and corrected. Written in Ron Cody's signature informal, tutorial style, this book develops and demonstrates data cleaning programs and macros that you can use as written or modify for your own special data cleaning needs. Each topic is developed through specific examples, and every program and macro is explained in detail. You'll learn how to find and correct errors in character and numeric values develop programming techniques related to dates and missing values use SQL approaches to data cleaning develop techniques for correcting your data errors use integrity constraints and audit trails to prevent errors from being added to a clean data set Novice and experienced SAS users will discover ways to detect and correct data errors while learning how to apply DATA step programming techniques and SAS procedures.

Download or read book Cody s Data Cleaning Techniques Using SAS written by Ronald P. Cody and published by SAS Institute. This book was released on 2008 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated for SAS 9, this edition addresses tasks that SAS programmers need to do to make sure that data errors are located and corrected. The book demonstrates data cleaning programs and macros that programmers can use as written or modify for their own special data cleaning needs.

Download or read book Cody s Data Cleaning Techniques Using SAS Software written by Ronald P. Cody and published by Sas Inst. This book was released on 1999 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key to ensuring accurate data is having clean data. This book develops and describes data cleaning programs and macros. You can use many of the programs and macros that are provided, as is, or you can modify them for your own special data cleaning tasks. Ron has carefully explained and documented each of the programs and macros, thus providing you with SAS programming instruction on an intermediate-to-advanced level. Written in Ron's signature informal, tutorial style, this book gives anyone who manages data thoroughly documented, step-by-step instructions for the development of data cleaning programs and macros. Book jacket.

Download or read book SAS Functions by Example Second Edition written by Ron Cody, EdD and published by SAS Institute. This book was released on 2010-03-11 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated for SAS 9.2, Ron Cody's SAS Functions by Example, Second Edition, is a must-have reference for anyone who programs in Base SAS. With the addition of functions new to SAS 9.2, this comprehensive reference manual now includes more than 200 functions, including new character, date and time, distance, probability, sort, and special functions. This new edition also contains more examples for existing functions and more details concerning optional arguments. Like the first edition, the new edition also includes a list of SAS programs, an alphabetic list of all the functions in the book, and a comprehensive index of functions and tasks. Beginning and experienced SAS users will benefit from this useful reference guide to SAS functions. This book is part of the SAS Press program.

Download or read book SAS Statistics by Example written by Ron Cody, EdD and published by SAS Institute. This book was released on 2011-08-22 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: In SAS Statistics by Example, Ron Cody offers up a cookbook approach for doing statistics with SAS. Structured specifically around the most commonly used statistical tasks or techniques--for example, comparing two means, ANOVA, and regression--this book provides an easy-to-follow, how-to approach to statistical analysis not found in other books. For each statistical task, Cody includes heavily annotated examples using ODS Statistical Graphics procedures such as SGPLOT, SGSCATTER, and SGPANEL that show how SAS can produce the required statistics. Also, you will learn how to test the assumptions for all relevant statistical tests. Major topics featured include descriptive statistics, one- and two-sample tests, ANOVA, correlation, linear and multiple regression, analysis of categorical data, logistic regression, nonparametric techniques, and power and sample size. This is not a book that teaches statistics. Rather, SAS Statistics by Example is perfect for intermediate to advanced statistical programmers who know their statistics and want to use SAS to do their analyses. This book is part of the SAS Press program.

Download or read book Learning SAS by Example written by Ron Cody and published by SAS Institute. This book was released on 2018-07-03 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to program SAS by example! Learning SAS by Example, A Programmer’s Guide, Second Edition, teaches SAS programming from very basic concepts to more advanced topics. Because most programmers prefer examples rather than reference-type syntax, this book uses short examples to explain each topic. The second edition has brought this classic book on SAS programming up to the latest SAS version, with new chapters that cover topics such as PROC SGPLOT and Perl regular expressions. This book belongs on the shelf (or e-book reader) of anyone who programs in SAS, from those with little programming experience who want to learn SAS to intermediate and even advanced SAS programmers who want to learn new techniques or identify new ways to accomplish existing tasks. In an instructive and conversational tone, author Ron Cody clearly explains each programming technique and then illustrates it with one or more real-life examples, followed by a detailed description of how the program works. The text is divided into four major sections: Getting Started, DATA Step Processing, Presenting and Summarizing Your Data, and Advanced Topics. Subjects addressed include Reading data from external sources Learning details of DATA step programming Subsetting and combining SAS data sets Understanding SAS functions and working with arrays Creating reports with PROC REPORT and PROC TABULATE Getting started with the SAS macro language Leveraging PROC SQL Generating high-quality graphics Using advanced features of user-defined formats and informats Restructuring SAS data sets Working with multiple observations per subject Getting started with Perl regular expressions You can test your knowledge and hone your skills by solving the problems at the end of each chapter.

Download or read book Common Statistical Methods for Clinical Research with SAS Examples Third Edition written by Glenn Walker and published by SAS Institute. This book was released on 2010-02-15 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glenn Walker and Jack Shostak's Common Statistical Methods for Clinical Research with SAS Examples, Third Edition, is a thoroughly updated edition of the popular introductory statistics book for clinical researchers. This new edition has been extensively updated to include the use of ODS graphics in numerous examples as well as a new emphasis on PROC MIXED. Straightforward and easy to use as either a text or a reference, the book is full of practical examples from clinical research to illustrate both statistical and SAS methodology. Each example is worked out completely, step by step, from the raw data. Common Statistical Methods for Clinical Research with SAS Examples, Third Edition, is an applications book with minimal theory. Each section begins with an overview helpful to nonstatisticians and then drills down into details that will be valuable to statistical analysts and programmers. Further details, as well as bonus information and a guide to further reading, are presented in the extensive appendices. This text is a one-source guide for statisticians that documents the use of the tests used most often in clinical research, with assumptions, details, and some tricks--all in one place. This book is part of the SAS Press program.

Download or read book A Gentle Introduction to Statistics Using SAS Studio in the Cloud written by Ron Cody and published by SAS Institute. This book was released on 2021-05-07 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Point and click your way to performing statistics! Many people are intimidated by learning statistics, but A Gentle Introduction to Statistics Using SAS Studio in the Cloud is here to help. Whether you need to perform statistical analysis for a project or, perhaps, for a course in education, psychology, sociology, economics, or any other field that requires basic statistical skills, this book teaches the fundamentals of statistics, from designing your experiment through calculating logistic regressions. Serving as an introduction to many common statistical tests and principles, it explains concepts in an intuitive way with little math and very few formulas. The book is full of examples demonstrating the use of SAS Studio’s easy point-and-click interface accessed with SAS OnDemand for Academics, an online delivery platform for teaching and learning statistical analysis that provides free access to SAS software via the cloud. Topics included in this book are: How to access SAS OnDemand for Academics Descriptive statistics One-sample tests T tests (for independent or paired samples) One-way analysis of variance (ANOVA) N-way ANOVA Correlation analysis Simple and multiple linear regression Binary logistic regression Categorical data, including two-way tables and chi-square Power and sample size calculations Questions are provided to test your knowledge and practice your skills.

Download or read book Pharmaceutical Statistics Using SAS written by Alex Dmitrienko and published by SAS Institute. This book was released on 2007 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces a range of data analysis problems encountered in drug development and illustrates them using case studies from actual pre-clinical experiments and clinical studies. Includes a discussion of methodological issues, practical advice from subject matter experts, and review of relevant regulatory guidelines.

Download or read book SAS for Linear Models written by Ramon Littell and published by John Wiley & Sons. This book was released on 2002-05-24 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Features and capabilities of the REG, ANOVA, and GLM procedures are included in this introduction to analysing linear models with the SAS System. This guide shows how to apply the appropriate procedure to data analysis problems and understand PROC GLM output. Other helpful guidelines and discussions cover the following significant areas: Multivariate linear models; lack-of-fit analysis; covariance and heterogeneity of slopes; a classification with both crossed and nested effects; and analysis of variance for balanced data. This fourth edition includes updated examples, new software-related features, and new material, including a chapter on generalised linear models. Version 8 of the SAS System was used to run the SAS code examples in the book. * Provides clear explanations of how to use SAS to analyse linear models * Includes numerous SAS outputs * Includes new chapter on generalised linear models * Uses version 8 of the SAS system This book assists data analysts who use SAS/STAT software to analyse data using regression analysis and analysis of variance. It assumes familiarity with basic SAS concepts such as creating SAS data sets with the DATA step and manipulating SAS data sets with the procedures in base SAS software.

Download or read book PROC SQL written by Kirk Paul Lafler and published by SAS Institute. This book was released on 2019-03-20 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROC SQL: Beyond the Basics Using SAS®, Third Edition, is a step-by-step, example-driven guide that helps readers master the language of PROC SQL. Packed with analysis and examples illustrating an assortment of PROC SQL options, statements, and clauses, this book not only covers all the basics, but it also offers extensive guidance on complex topics such as set operators and correlated subqueries. Programmers at all levels will appreciate Kirk Lafler’s easy-to-follow examples, clear explanations, and handy tips to extend their knowledge of PROC SQL. This third edition explores new and powerful features in SAS® 9.4, including topics such as: IFC and IFN functions nearest neighbor processing the HAVING clause indexes It also features two completely new chapters on fuzzy matching and data-driven programming. Delving into the workings of PROC SQL with greater analysis and discussion, PROC SQL: Beyond the Basics Using SAS®, Third Edition, explores this powerful database language using discussion and numerous real-world examples.

Download or read book Getting Started with SAS Programming written by Ron Cody and published by SAS Institute. This book was released on 2021-02-24 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get up and running with SAS using Ron Cody’s easy-to-follow, step-by-step guide. Aimed at beginners, Getting Started with SAS Programming: Using SAS Studio in the Cloud uses short examples to teach SAS programming from the basics to more advanced topics in the point-and-click interactive environment of SAS Studio. To begin, you will learn how to register for SAS OnDemand for Academics, an online delivery platform for teaching and learning statistical analysis that provides free access to SAS software via the cloud. The first part of the book shows you how to use SAS Studio built-in tasks to produce a report, summarize data, and create charts and graphs. It also describes how you can perform basic statistical tests using the interactive point-and-click environment. The second part of the book uses easy-to-follow examples to show you how to write your own SAS programs and how to use SAS procedures to perform a variety of tasks. This part of the book also explains how to read data from a variety of sources: text files, Excel workbooks, and CSV files. In order to get familiar with the SAS Studio environment, this book also shows you how to access dozens of interesting data sets that are included with the SAS OnDemand for Academics platform.

Download or read book SAS Certification Prep Guide written by Joni N. Shreve and published by SAS Institute. This book was released on 2018-12-18 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Must-have study guide for the SAS® Certified Statistical Business Analyst Using SAS®9: Regression and Modeling exam! Written for both new and experienced SAS programmers, the SAS® Certification Prep Guide: Statistical Business Analysis Using SAS®9 is an in-depth prep guide for the SAS® Certified Statistical Business Analyst Using SAS®9: Regression and Modeling exam. The authors step through identifying the business question, generating results with SAS, and interpreting the output in a business context. The case study approach uses both real and simulated data to master the content of the certification exam. Each chapter also includes a quiz aimed at testing the reader’s comprehension of the material presented. Major topics include: ANOVA Linear Regression Logistic Regression Inputs for Predictive Modeling Model Performance For those new to statistical topics or those needing a review of statistical foundations, this book also serves as an excellent reference guide for understanding descriptive and inferential statistics. Appendices can be found here.

Download or read book Biostatistics by Example Using SAS Studio written by Ron Cody and published by SAS Institute. This book was released on 2016-09-22 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to solve basic statistical problems with Ron Cody's easy-to-follow style using the point-and-click SAS Studio tasks. Aimed specifically at the health sciences, Biostatistics by Example Using SAS Studio, provides an introduction to SAS Studio tasks. The book includes many biological and health-related problem sets and is fully compatible with SAS University Edition. After reading this book you will be able to understand temporary and permanent SAS data sets, and you will learn how to create them from various data sources. You will also be able to use SAS Studio statistics tasks to generate descriptive statistics for continuous and categorical data. The inferential statistics portion of the book covers the following topics: paired and unpaired t tests one-way analysis of variance N-way ANOVA correlation simple and multiple regression logistic regression categorical data analysis power and sample size calculations Besides describing each of these statistical tests, the book also discusses the assumptions that need to be met before running and interpreting these tests. For two-sample tests and N-way tests, nonparametric tests are also described. This book leads you step-by-step through each of the statistical tests with numerous screen shots, and you will see how to read and interpret all of the output generated by these tests. Experience with some basic statistical tests used to analyze medical data or classroom experience in biostatistics or statistics is required. Although the examples are related to the medical and biology fields, researchers in other fields such as psychology or education will find this book helpful. No programming experience is required. Loading data files into SAS University Edition? Click here for more information.

Download or read book Smart Cities Power Electronics Renewable Energy and Internet of Things written by Ahteshamul Haque and published by CRC Press. This book was released on 2024-02-15 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the integration of power electronics, renewable energy, and the Internet of Things (IoT) from the perspective of smart cities in a single volume. The text will be helpful for senior undergraduate, graduate students and academic researchers in diverse engineering fields including electrical, electronics and communication, and computers. The book: Covers the integration of power electronics, energy harvesting, and the IoT for smart city applications Discusses concepts of power electronics and the IoT in electric vehicles for smart cities Examines the integration of power electronics in renewable energy for smart cities Discusses important concepts of energy harvesting including solar energy harvesting, maximum power point tracking (MPPT) controllers, and switch-mode power supplies (SMPS) Explores IoT connectivity technologies such as long-term evolution (LTE), narrow band NB-IoT, long-range (LoRa), Bluetooth, and ZigBee (IEEE Standard 802.15.4) for low data rate wireless personal communication applications The text provides the knowledge about applications, technologies, and standards of power electronics, renewable energy, and IoT for smart cities. It will serve as an ideal reference text for senior undergraduate, graduate students and academic researchers in the fields of electrical engineering, electronics and communication engineering, computer engineering, civil engineering, and environmental engineering.

Download or read book An Introduction to SAS University Edition written by Ron Cody and published by SAS Institute. This book was released on 2018-02-02 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at beginners who have downloaded the free SAS University Edition and want to either use the point-and-click interactive environment of SAS Studio, or who want to write their own SAS programs, or both, this book begins by showing you how to obtain the SAS University Edition, and how you can run SAS on a PC or Macintosh computer. Topics include: performing basic tasks, such as producing a report, summarizing data, producing charts and graphs, and using the SAS Studio built-in tasks; performing basic statistical tests using the interactive point-and-click environment; how to write your own SAS programs, and how to use SAS procedures to perform a variety of tasks; how to read data from a variety of sources: text files, Excel workbooks, and CSV files. In order to get familiar with the SAS Studio environment, this book also shows you how to access dozens of interesting data sets that are included with the product. --