Download or read book 3rd International Castle Meeting on Coding Theory and Applications written by Joaquim Borges and published by Univ. Autònoma de Barcelona. This book was released on 2011-09-05 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1999, a conference called International Meeting on Coding Theory and Cryptography took place at Mota Castle in Castilia (Spain). The conference had great acceptance within the community of coding theory and cryptography researchers. At that moment, and also nowadays, there are not many international workshops about these topics, at least if we compare with other mathematical and engineering subjects of research. Therefore, the general desire was to continue with more Castle Meetings. However, the following conference did not take place until 2008. In that case, the conference was called II International Castle Meeting on Coding Theory and Applications allowing more topics related to coding theory apart from cryptography. Such conference took place at Mota Castle again and the number of participants was similar to the previous edition. The present edition of the conference, called III International Castle Meeting on Coding Theory and Applications has been held at Cardona Castle in Catalonia (Spain). The number of communications has increased and a number of selected papers will be published in a special issue of the journal Designs, Codes and Cryptography. As in the previous editions, the conference has been of high level with notorious invited speakers and scientic committee members.

Download or read book Data Storage written by Florin Balasa and published by BoD – Books on Demand. This book was released on 2010-04-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents several advances in different research areas related to data storage, from the design of a hierarchical memory subsystem in embedded signal processing systems for data-intensive applications, through data representation in flash memories, data recording and retrieval in conventional optical data storage systems and the more recent holographic systems, to applications in medicine requiring massive image databases.

Download or read book Error Correction Codes for Non Volatile Memories written by Rino Micheloni and published by Springer Science & Business Media. This book was released on 2008-06-03 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays it is hard to find an electronic device which does not use codes: for example, we listen to music via heavily encoded audio CD's and we watch movies via encoded DVD's. There is at least one area where the use of encoding/decoding is not so developed, yet: Flash non-volatile memories. Flash memory high-density, low power, cost effectiveness, and scalable design make it an ideal choice to fuel the explosion of multimedia products, like USB keys, MP3 players, digital cameras and solid-state disk. In ECC for Non-Volatile Memories the authors expose the basics of coding theory needed to understand the application to memories, as well as the relevant design topics, with reference to both NOR and NAND Flash architectures. A collection of software routines is also included for better understanding. The authors form a research group (now at Qimonda) which is the typical example of a fruitful collaboration between mathematicians and engineers.

Download or read book VLSI SoC Design for Reliability Security and Low Power written by Youngsoo Shin and published by Springer. This book was released on 2016-09-12 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended and revised versions of the best papers presented at the 23rd IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2015, held in Daejeon, Korea, in October 2015. The 10 papers included in the book were carefully reviewed and selected from the 44 full papers presented at the conference. The papers cover a wide range of topics in VLSI technology and advanced research. They address the current trend toward increasing chip integration and technology process advancements bringing about new challenges both at the physical and system-design levels, as well as in the test of these systems.

Download or read book Flash Memories written by Igor Stievano and published by BoD – Books on Demand. This book was released on 2011-09-06 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flash memories and memory systems are key resources for the development of electronic products implementing converging technologies or exploiting solid-state memory disks. This book illustrates state-of-the-art technologies and research studies on Flash memories. Topics in modeling, design, programming, and materials for memories are covered along with real application examples.

Download or read book Digital Storage in Consumer Electronics written by Thomas M. Coughlin and published by Springer. This book was released on 2017-12-09 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to digital storage for consumer electronics. It discusses the various types of digital storage, including emerging non-volatile solid-state storage technologies and their advantages and disadvantages. It discusses the best practices for selecting, integrating, and using storage devices for various applications. It explores the networking of devices into an overall organization that results in always-available home storage combined with digital storage in the cloud to create an infrastructure to support emerging consumer applications and the Internet of Things. It also looks at the role of digital storage devices in creating security and privacy in consumer products.

Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 2000 with total page 1226 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Channel Codes written by William Ryan and published by Cambridge University Press. This book was released on 2009-09-17 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Channel coding lies at the heart of digital communication and data storage, and this detailed introduction describes the core theory as well as decoding algorithms, implementation details, and performance analyses. In this book, Professors Ryan and Lin provide clear information on modern channel codes, including turbo and low-density parity-check (LDPC) codes. They also present detailed coverage of BCH codes, Reed-Solomon codes, convolutional codes, finite geometry codes, and product codes, providing a one-stop resource for both classical and modern coding techniques. Assuming no prior knowledge in the field of channel coding, the opening chapters begin with basic theory to introduce newcomers to the subject. Later chapters then extend to advanced topics such as code ensemble performance analyses and algebraic code design. 250 varied and stimulating end-of-chapter problems are also included to test and enhance learning, making this an essential resource for students and practitioners alike.

Download or read book Embedded Memories for Nano Scale VLSIs written by Kevin Zhang and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kevin Zhang Advancement of semiconductor technology has driven the rapid growth of very large scale integrated (VLSI) systems for increasingly broad applications, incl- ing high-end and mobile computing, consumer electronics such as 3D gaming, multi-function or smart phone, and various set-top players and ubiquitous sensor and medical devices. To meet the increasing demand for higher performance and lower power consumption in many different system applications, it is often required to have a large amount of on-die or embedded memory to support the need of data bandwidth in a system. The varieties of embedded memory in a given system have alsobecome increasingly more complex, ranging fromstatictodynamic and volatile to nonvolatile. Among embedded memories, six-transistor (6T)-based static random access memory (SRAM) continues to play a pivotal role in nearly all VLSI systems due to its superior speed and full compatibility with logic process technology. But as the technology scaling continues, SRAM design is facing severe challenge in mainta- ing suf?cient cell stability margin under relentless area scaling. Meanwhile, rapid expansion in mobile application, including new emerging application in sensor and medical devices, requires far more aggressive voltage scaling to meet very str- gent power constraint. Many innovative circuit topologies and techniques have been extensively explored in recent years to address these challenges.

Download or read book iPhone and iOS Forensics written by Andrew Hoog and published by Elsevier. This book was released on 2011-07-25 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: iPhone and iOS Forensics is a guide to the forensic acquisition and analysis of iPhone and iOS devices, and offers practical advice on how to secure iOS devices, data and apps. The book takes an in-depth look at methods and processes that analyze the iPhone/iPod in an official legal manner, so that all of the methods and procedures outlined in the text can be taken into any courtroom. It includes information data sets that are new and evolving, with official hardware knowledge from Apple itself to help aid investigators.This book consists of 7 chapters covering device features and functions; file system and data storage; iPhone and iPad data security; acquisitions; data and application analysis; and commercial tool testing.This book will appeal to forensic investigators (corporate and law enforcement) and incident response professionals. - Learn techniques to forensically acquire the iPhone, iPad and other iOS devices - Entire chapter focused on Data and Application Security that can assist not only forensic investigators, but also application developers and IT security managers - In-depth analysis of many of the common applications (both default and downloaded), including where specific data is found within the file system

Download or read book 3D Flash Memories written by Rino Micheloni and published by Springer. This book was released on 2016-05-26 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book walks the reader through the next step in the evolution of NAND flash memory technology, namely the development of 3D flash memories, in which multiple layers of memory cells are grown within the same piece of silicon. It describes their working principles, device architectures, fabrication techniques and practical implementations, and highlights why 3D flash is a brand new technology. After reviewing market trends for both NAND and solid state drives (SSDs), the book digs into the details of the flash memory cell itself, covering both floating gate and emerging charge trap technologies. There is a plethora of different materials and vertical integration schemes out there. New memory cells, new materials, new architectures (3D Stacked, BiCS and P-BiCS, 3D FG, 3D VG, 3D advanced architectures); basically, each NAND manufacturer has its own solution. Chapter 3 to chapter 7 offer a broad overview of how 3D can materialize. The 3D wave is impacting emerging memories as well and chapter 8 covers 3D RRAM (resistive RAM) crosspoint arrays. Visualizing 3D structures can be a challenge for the human brain: this is way all these chapters contain a lot of bird’s-eye views and cross sections along the 3 axes. The second part of the book is devoted to other important aspects, such as advanced packaging technology (i.e. TSV in chapter 9) and error correction codes, which have been leveraged to improve flash reliability for decades. Chapter 10 describes the evolution from legacy BCH to the most recent LDPC codes, while chapter 11 deals with some of the most recent advancements in the ECC field. Last but not least, chapter 12 looks at 3D flash memories from a system perspective. Is 14nm the last step for planar cells? Can 100 layers be integrated within the same piece of silicon? Is 4 bit/cell possible with 3D? Will 3D be reliable enough for enterprise and datacenter applications? These are some of the questions that this book helps answering by providing insights into 3D flash memory design, process technology and applications.

Download or read book Emerging Directions in Embedded and Ubiquitous Computing written by Xiaobo Zhou and published by Springer. This book was released on 2006-08-29 with total page 1061 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here are the refereed proceedings of the EUC 2006 workshops, held in conjunction with the IFIP International Conference on Embedded and Ubiquitous Computing in Seoul, Korea, August 2006. The book presents 102 revised papers spanning six workshops: network-centric ubiquitous systems (NCUS 2006), security in ubiquitous computing systems (SecUbiq 2006), RFID and ubiquitous sensor networks (USN 2006), trustworthiness, reliability and services in ubiquitous and sensor networks (TRUST 2006), embedded software optimization (ESO 2006), and multimedia solution and assurance in ubiquitous information systems (MSA 2006).

Download or read book PC Mag written by and published by . This book was released on 1993-01-26 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: PCMag.com is a leading authority on technology, delivering Labs-based, independent reviews of the latest products and services. Our expert industry analysis and practical solutions help you make better buying decisions and get more from technology.

Download or read book Extreme Environment Electronics written by John D. Cressler and published by CRC Press. This book was released on 2017-12-19 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unfriendly to conventional electronic devices, circuits, and systems, extreme environments represent a serious challenge to designers and mission architects. The first truly comprehensive guide to this specialized field, Extreme Environment Electronics explains the essential aspects of designing and using devices, circuits, and electronic systems intended to operate in extreme environments, including across wide temperature ranges and in radiation-intense scenarios such as space. The Definitive Guide to Extreme Environment Electronics Featuring contributions by some of the world’s foremost experts in extreme environment electronics, the book provides in-depth information on a wide array of topics. It begins by describing the extreme conditions and then delves into a description of suitable semiconductor technologies and the modeling of devices within those technologies. It also discusses reliability issues and failure mechanisms that readers need to be aware of, as well as best practices for the design of these electronics. Continuing beyond just the "paper design" of building blocks, the book rounds out coverage of the design realization process with verification techniques and chapters on electronic packaging for extreme environments. The final set of chapters describes actual chip-level designs for applications in energy and space exploration. Requiring only a basic background in electronics, the book combines theoretical and practical aspects in each self-contained chapter. Appendices supply additional background material. With its broad coverage and depth, and the expertise of the contributing authors, this is an invaluable reference for engineers, scientists, and technical managers, as well as researchers and graduate students. A hands-on resource, it explores what is required to successfully operate electronics in the most demanding conditions.

Download or read book Asia Electronics Industry written by and published by . This book was released on 2007 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Electrical Engineering Handbook written by Wai Kai Chen and published by Elsevier. This book was released on 2004-11-16 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electrical Engineer's Handbook is an invaluable reference source for all practicing electrical engineers and students. Encompassing 79 chapters, this book is intended to enlighten and refresh knowledge of the practicing engineer or to help educate engineering students. This text will most likely be the engineer's first choice in looking for a solution; extensive, complete references to other sources are provided throughout. No other book has the breadth and depth of coverage available here. This is a must-have for all practitioners and students! The Electrical Engineer's Handbook provides the most up-to-date information in: Circuits and Networks, Electric Power Systems, Electronics, Computer-Aided Design and Optimization, VLSI Systems, Signal Processing, Digital Systems and Computer Engineering, Digital Communication and Communication Networks, Electromagnetics and Control and Systems.About the Editor-in-Chief...Wai-Kai Chen is Professor and Head Emeritus of the Department of Electrical Engineering and Computer Science at the University of Illinois at Chicago. He has extensive experience in education and industry and is very active professionally in the fields of circuits and systems. He was Editor-in-Chief of the IEEE Transactions on Circuits and Systems, Series I and II, President of the IEEE Circuits and Systems Society and is the Founding Editor and Editor-in-Chief of the Journal of Circuits, Systems and Computers. He is the recipient of the Golden Jubilee Medal, the Education Award, and the Meritorious Service Award from the IEEE Circuits and Systems Society, and the Third Millennium Medal from the IEEE. Professor Chen is a fellow of the IEEE and the American Association for the Advancement of Science.* 77 chapters encompass the entire field of electrical engineering.* THOUSANDS of valuable figures, tables, formulas, and definitions.* Extensive bibliographic references.

Download or read book Emerging Memory Technologies written by Yuan Xie and published by Springer Science & Business Media. This book was released on 2013-10-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the design implications of emerging, non-volatile memory (NVM) technologies on future computer memory hierarchy architecture designs. Since NVM technologies combine the speed of SRAM, the density of DRAM, and the non-volatility of Flash memory, they are very attractive as the basis for future universal memories. This book provides a holistic perspective on the topic, covering modeling, design, architecture and applications. The practical information included in this book will enable designers to exploit emerging memory technologies to improve significantly the performance/power/reliability of future, mainstream integrated circuits.