Download or read book Model Driven Development for Embedded Software written by Jean-Aime Maxa and published by Elsevier. This book was released on 2018-03-27 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-driven Development for Embedded Software: Application to Communications for Drone Swarm describes the principles of model-oriented design used in the aeronautical field, specifically for the UAV (Unmanned Aerial Vehicle). The book focuses on designing an embedded system for drones to carry out ad hoc communication within a drone fleet. In this context, an original methodology for rapid prototyping of embedded systems is presented. This approach saves time for the verification and formal validation phases, contributing to certification of the Unmanned Aerial System (UAS). The book also addresses the more traditional verification phases that must be performed to verify accuracy of the system. This evaluation is carried out in simulation and by real experimentation. The various tools necessary for the implementation of this methodology are described to allow the reader to be able to implement independently. Finally, to illustrate the contribution of this original methodology, an example of embedded system development is presented in which the different phases of the methodology are explained to conceive, validate and test a new secure routing protocol developed for communications within a fleet of drones. - Describes the principles of model-oriented design used in the aeronautical field - Presents an original methodology of rapid prototyping of embedded systems - Presents a mode of development for embedded systems in the different phases

Download or read book Component Based Software Development for Embedded Systems written by Colin Atkinson and published by Springer Science & Business Media. This book was released on 2005-12-12 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a good opportunity for software engineering practitioners and researchers to get in sync with the current state-of-the-art and future trends in component-based embedded software research. The book is based on a selective compilation of papers that cover the complete component-based embedded software spectrum, ranging from methodology to tools. Methodology aspects covered by the book include functional and non-functional specification, validation, verification, and component architecture. As tools are a critical success factor in the transfer from academia-generated knowledge to industry-ready technology, an important part of the book is devoted to tools. This state-of-the-art survey contains 16 carefully selected papers organised in topical sections on specification and verification, component compatibility, component architectures, implementation and tool support, as well as non-functional properties.

Download or read book Domain Specific Modeling written by Steven Kelly and published by John Wiley & Sons. This book was released on 2008-04-11 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: "[The authors] are pioneers. . . . Few in our industry have their breadth of knowledge and experience." —From the Foreword by Dave Thomas, Bedarra Labs Domain-Specific Modeling (DSM) is the latest approach to software development, promising to greatly increase the speed and ease of software creation. Early adopters of DSM have been enjoying productivity increases of 500–1000% in production for over a decade. This book introduces DSM and offers examples from various fields to illustrate to experienced developers how DSM can improve software development in their teams. Two authorities in the field explain what DSM is, why it works, and how to successfully create and use a DSM solution to improve productivity and quality. Divided into four parts, the book covers: background and motivation; fundamentals; in-depth examples; and creating DSM solutions. There is an emphasis throughout the book on practical guidelines for implementing DSM, including how to identify the necessary language constructs, how to generate full code from models, and how to provide tool support for a new DSM language. The example cases described in the book are available the book's Website, www.dsmbook.com, along with, an evaluation copy of the MetaEdit+ tool (for Windows, Mac OS X, and Linux), which allows readers to examine and try out the modeling languages and code generators. Domain-Specific Modeling is an essential reference for lead developers, software engineers, architects, methodologists, and technical managers who want to learn how to create a DSM solution and successfully put it into practice.

Download or read book Model Driven Software Development written by Sami Beydeda and published by Springer Science & Business Media. This book was released on 2005-11-11 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstraction is the most basic principle of software engineering. Abstractions are provided by models. Modeling and model transformation constitute the core of model-driven development. Models can be refined and finally be transformed into a technical implementation, i.e., a software system. The aim of this book is to give an overview of the state of the art in model-driven software development. Achievements are considered from a conceptual point of view in the first part, while the second part describes technical advances and infrastructures. Finally, the third part summarizes experiences gained in actual projects employing model-driven development. Beydeda, Book and Gruhn put together the results from leading researchers in this area, both from industry and academia. The result is a collection of papers which gives both researchers and graduate students a comprehensive overview of current research issues and industrial forefront practice, as promoted by OMG’s MDA initiative.

Download or read book Model Based Design for Embedded Systems written by Gabriela Nicolescu and published by CRC Press. This book was released on 2018-09-03 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands of increasingly complex embedded systems and associated performance computations have resulted in the development of heterogeneous computing architectures that often integrate several types of processors, analog and digital electronic components, and mechanical and optical components—all on a single chip. As a result, now the most prominent challenge for the design automation community is to efficiently plan for such heterogeneity and to fully exploit its capabilities. A compilation of work from internationally renowned authors, Model-Based Design for Embedded Systems elaborates on related practices and addresses the main facets of heterogeneous model-based design for embedded systems, including the current state of the art, important challenges, and the latest trends. Focusing on computational models as the core design artifact, this book presents the cutting-edge results that have helped establish model-based design and continue to expand its parameters. The book is organized into three sections: Real-Time and Performance Analysis in Heterogeneous Embedded Systems, Design Tools and Methodology for Multiprocessor System-on-Chip, and Design Tools and Methodology for Multidomain Embedded Systems. The respective contributors share their considerable expertise on the automation of design refinement and how to relate properties throughout this refinement while enabling analytic and synthetic qualities. They focus on multi-core methodological issues, real-time analysis, and modeling and validation, taking into account how optical, electronic, and mechanical components often interface. Model-based design is emerging as a solution to bridge the gap between the availability of computational capabilities and our inability to make full use of them yet. This approach enables teams to start the design process using a high-level model that is gradually refined through abstraction levels to ultimately yield a prototype. When executed well, model-based design encourages enhanced performance and quicker time to market for a product. Illustrating a broad and diverse spectrum of applications such as in the automotive aerospace, health care, consumer electronics, this volume provides designers with practical, readily adaptable modeling solutions for their own practice.

Download or read book Model Driven Software Development written by Markus Völter and published by John Wiley & Sons. This book was released on 2013-06-26 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-Driven Software Development (MDSD) is currently a highly regarded development paradigm among developers and researchers. With the advent of OMG's MDA and Microsoft's Software Factories, the MDSD approach has moved to the centre of the programmer's attention, becoming the focus of conferences such as OOPSLA, JAOO and OOP. MDSD is about using domain-specific languages to create models that express application structure or behaviour in an efficient and domain-specific way. These models are subsequently transformed into executable code by a sequence of model transformations. This practical guide for software architects and developers is peppered with practical examples and extensive case studies. International experts deliver: * A comprehensive overview of MDSD and how it relates to industry standards such as MDA and Software Factories. * Technical details on meta modeling, DSL construction, model-to-model and model-to-code transformations, and software architecture. * Invaluable insight into the software development process, plus engineering issues such as versioning, testing and product line engineering. * Essential management knowledge covering economic and organizational topics, from a global perspective. Get started and benefit from some practical support along the way!

Download or read book Model driven development methodology for hybrid embedded systems based on UML with emphasis on safety related requirements written by Daw Pérez, Zamira Angélica and published by kassel university press GmbH. This book was released on 2014-01-01 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Entwicklung eingebetteter Systeme wird aufgrund der immer anspruchsvolleren Anwendungen sowie der Verwendung von leistungsfähigeren Hardware-Architekturen (z.B. Multicore-, Hybrid-Systeme) immer komplexer. Modellgetriebene Methoden reduzieren die Komplexität des Systems mittels angemessenen Abstraktionsniveaus. Diese Arbeit stellt die modellgetriebene Entwicklungsmethodik DMOSES (Determi-nistische Modelle für die signalverarbeitenden eingebetteten Systeme) vor. Diese Methodik strebt die Verbesserung der Entwicklung hybrider eingebetteten Systeme (z.B. CPUs und FPGAs) hinsichtlich der Komplexität mittels anpassbarer Abstraktionseben, automatischer Codegenerierung und Systemverifikation an. Systeme werden mittels UML-Verhaltensmodelle spezifiziert, deren erweiterte Semantik relevante funktionale und nicht-funktionale Aspekte hybrider eingebetteten Systemen beschreibt. Eine anpassbare Abstraktionsebene wird durch die Integration von automatischer Code-Generierung und optimierbarem Code erreicht. Außerdem werden Sicherheitsanforderungen durch die Integration von Analysetechniken (Formale Verifikation, Ausführungszeit-Analyse und Software-Verträgen) in die Entwicklungsmethodik verifiziert.

Download or read book Radical Innovations of Software and Systems Engineering in the Future written by Martin Wirsing and published by Springer Science & Business Media. This book was released on 2004-03-18 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 9th International Workshop on Radical Innovations of Software and Systems Engineering in the Future, RISSEF 2002, held in Venice, Italy, in October 2002. The 24 revised full papers presented were carefully reviewed and selected from the 36 invited workshop presentations. The authors evaluate all major paradigms and conceptual issues in software and systems design and analysis, especially regarding their potential for modifications to cope with future needs.

Download or read book Embedded Systems Development written by Alberto Sangiovanni-Vincentelli and published by Springer Science & Business Media. This book was released on 2013-07-19 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers readers broad coverage of techniques to model, verify and validate the behavior and performance of complex distributed embedded systems. The authors attempt to bridge the gap between the three disciplines of model-based design, real-time analysis and model-driven development, for a better understanding of the ways in which new development flows can be constructed, going from system-level modeling to the correct and predictable generation of a distributed implementation, leveraging current and future research results.

Download or read book Model Driven Development of Reliable Automotive Services written by Manfred Broy and published by Springer Science & Business Media. This book was released on 2008-07-14 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-workshop proceedings of the Second Automotive Software Workshop, ASWSD 2006, held in San Diego, CA, USA in March 2006. The 11 revised full papers presented were carefully reviewed and selected from 18 lectures held at the workshop, that brought together experts from industry and academia, working on highly complex, distributed, reactive software systems related to the automotive domain. The papers are organized in topical sections on modeling techniques and infrastructures, model transformations, quality assurance, real-time control, as well as services and components.

Download or read book Readings in Hardware Software Co Design written by Giovanni De Micheli and published by Elsevier. This book was released on 2001-06-19 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded system designers are constantly looking for new tools and techniques to help satisfy the exploding demand for consumer information appliances and specialized industrial products. One critical barrier to the timely release of embedded system products is integrating the design of the hardware and software systems. Hardware/software co-design is a set of methodologies and techniques specifically created to support the concurrent design of both systems, effectively reducing multiple iterations and major redesigns. In addition to its critical role in the development of embedded systems, many experts believe that co-design will be a key design methodology for Systems-on-a-Chip. Readings in Hardware/Software Co-Design presents the papers that have shaped the hardware/software co-design field since its inception in the early 90s. Field experts -- Giovanni De Micheli, Rolf Ernst, and Wayne Wolf -- introduce sections of the book, and provide context for the paper that follow. This collection provides professionals, researchers and graduate students with a single reference source for this critical aspect of computing design.* Over 50 peer-reviewed papers written from leading researchers and designers in the field* Selected, edited, and introduced by three of the fields' most eminent researchers and educators* Accompanied by an annually updated companion Web site with links and references to recently published papers, providing a forum for the editors to comment on how recent work continues or breaks with previous work in the field

Download or read book Evaluation of Novel Approaches to Software Engineering written by Raian Ali and published by Springer Nature. This book was released on 2021-02-26 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes selected, revised and extended papers of the 15th International Conference on Evaluation of Novel Approaches to Software Engineering, ENASE 2020, held in virtual format, in May 2020. The 19 revised full papers presented were carefully reviewed and selected from 96 submissions. The papers included in this book contribute to the understanding of relevant trends of current research on novel approaches to software engineering for the development and maintenance of systems and applications, specically with relation to: model-driven software engineering, requirements engineering, empirical software engineering, service-oriented software engineering, business process management and engineering, knowledge management and engineering, reverse software engineering, software process improvement, software change and configuration management, software metrics, software patterns and refactoring, application integration, software architecture, cloud computing, and formal methods.

Download or read book Software and Compilers for Embedded Systems written by Andreas Krall and published by Springer. This book was released on 2003-10-24 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 7th International Workshop on Software and Compilers for Embedded Systems, SCOPES 2003, held in Vienna, Austria, September 24–26, 2003. Initially, the workshop was referred to as the International Workshop on Code Generation for Embedded Systems. The ?rst workshop took place in 1994 in Schloss Dagstuhl, Germany. From its beg- nings, the intention of the organizers was to create an atmosphere in which the researcherscould participateactively in dynamic discussionsand pro?t from the assembly of international experts in the ?eld. It was at the fourth workshop, in St. Goar, Germany, in 1999, that the spectrum of topics of interest for the workshop was extended, and not only code generation, but also software and compilers for embedded systems, were considered. The change in ?elds of interest led to a change of name, and this is when the present name was used for the ?rst time. Since then, SCOPES has been held again in St. Goar, Germany, in 2001; Berlin, Germany, in 2002; and this year, 2003, in Vienna, Austria. In response to the call for papers, 43 very strong papers from all over the world were submitted. The program committee selected 26 papers for pres- tation at SCOPES 2003. All submitted papers were reviewed by at least three experts in order to ensure the quality of the work presented at the workshop.

Download or read book Safe and Secure Software Reuse written by John Favaro and published by Springer. This book was released on 2013-06-12 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th International Conference on Safe and Secure Software Reuse, ICSR 2013, held in Pisa, Italy, in June 2013. The 27 papers (18 full and 9 short papers) presented were carefully reviewed and selected from various submissions. The papers are organized in topical sections on feature modeling and variability analysis; reuse and testing; architecture and reuse; analysis for reuse; reuse and patterns, short papers, emerging ideas and trends.

Download or read book Next Generation Design and Verification Methodologies for Distributed Embedded Control Systems written by S. Ramesh and published by Springer Science & Business Media. This book was released on 2007-08-26 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of a workshop organized by General Motors research and development laboratory in Bangalore, India. It was the first of its kind to be run by an automotive major to bring together the leaders in the field of embedded systems development to present state-of-the-art work, and to discuss future strategies for addressing the increasing complexity of embedded control systems. The workshop consisted of invited talks given by leading experts and researchers from academic and industrial organizations. It covered all areas of embedded systems development.

Download or read book Model Driven Development of Advanced User Interfaces written by Heinrich Hussmann and published by Springer Science & Business Media. This book was released on 2011-01-16 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-Driven Development (MDD) has become an important paradigm in software development. It uses models as primary artifacts in the development process. This book provides an outstanding overview as well as deep insights into the area of model-driven development of user interfaces, which is an emerging topic in the intersection of Human-Computer-Interaction and Software-Engineering. The idea of this book is based on the very successful workshop series of “Model-Driven Development of Advanced User Interfaces (MDDAUI)”. It has been written by the leading researchers and practitioners in the field of model-driven development of user interfaces and offer a variety of solutions and examples for • Architectures and environments for the generation of user interfaces • User interface development for specific domains and purposes • Model-driven development in the context of ambient intelligence • Concepts supporting model-driven development of user interfaces

Download or read book Automotive Electronics Reliability written by Ronald K Jurgen and published by SAE International. This book was released on 2010-08-10 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle reliability problems continue to be the news because of major vehicle recalls from several manufacturers. This book includes 40 SAE technical papers, published from 2007 through 2010, that describe the latest research on automotive electronics reliability technology. This book will help engineers and researchers focus on the design strategies being used to minimize electronics reliability problems, and how to test and verify those strategies. After an overview of durability, risk assessment, and failure mechanisms, this book focuses on state-of-the-art techniques for reliability-based design, and reliability testing and verification. Topics include: powertrain control monitoring distributed automotive embedded systems model-based design x-by-wire systems battery durability design verification fault tree analysis The book also includes editor Ronald K. Jurgen’s introduction ,“Striving for Maximum Reliability in a Highly Complex Electronic Environment”, and a concluding section on the future of electronics reliability, including networking technology, domain control units, the use of AUTOSAR, and embedded software.