Download or read book Coconut Shell as a Source of Activated Carbon for Removal of Methylene Blue from Aqueous Solution written by Tiam Yong Lee and published by . This book was released on 2006 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coconut Shell Charcoal Adsorption to Remove Methyl Orange in Aqueous Solutions written by Miguel Manuel Manuel P√©rez Hern√°ndez and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated charcoal was prepared and characterized from residues of coconut peel (CACC) to remove by adsorption the Methyl Orange (AM) dye in aqueous solution. The charcoal was activated with phosphoric acid. The morphology and structure of the pores of the carbon obtained were analyzed by Scanning Electron Microscopy (SEM) and a surface analyzer. The adsorption data were evaluated by the BET, Langmuir and Freundlich isotherms, finding the Langmuir type I model. The surface area of the activated carbon was 526 m2/g with a pore volume of 0.234¬†cm3/g and an average pore diameter of 1.78¬†nm, according to BET, which indicates the presence of micropores. The calculated thermodynamic parameters showed that the adsorption of the AM dye in CACC is a spontaneous process at room temperature and that physisorption and chemisorption are probably involved. The adsorption tests were followed by UV,Äìvisible spectrophotometry. The effects of the adsorbate concentration (AM) and the heat treatment (450,Äì500¬∞C) with an air atmosphere were investigated, keeping constant the stirring time and the H3PO4/sample weight ratio. The results obtained indicate that the activated carbon obtained could be used as an alternative low-cost adsorbent in the removal of AM from effluents in aqueous solution.
Download or read book Utilization of Rubber Wood Chips as a Source of Activated Carbon for Removal of Methylene Blue from Aqueous Solution written by Khiam Lian Oon and published by . This book was released on 2006 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanocomposites in Wastewater Treatment written by Ajay Kumar Mishra and published by CRC Press. This book was released on 2014-12-04 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites have better adsorption capacity, selectivity, and stability than nanoparticles. Therefore, they find diversified applications in many areas. Recently, various methods for heavy metal detection from water have been extensively studied. The adsorption of various pollutants such as heavy metal ions and dyes from the contaminated water with the help of nanocomposites has attracted significant attention. This book presents a comprehensive discussion on wastewater research. It covers a vast background of the recent literature. It describes the applications of nanocomposites in various areas, including environmental science. Particularly, it is highly useful to researchers involved in the environmental and water research on nanocomposites and their applications. The book covers a broad research area of chemistry, physics, materials science, polymer science and engineering, and nanotechnology to present an interdisciplinary approach and also throws light on the recent advances in the field.
Download or read book Synthesis Technology and Applications of Carbon Nanomaterials written by Suraya Abdul Rashid and published by Elsevier. This book was released on 2018-10-10 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis, Technology and Applications of Carbon Nanomaterials explores the chemical properties of different classes of carbon nanomaterials and their major applications. As carbon nanomaterials are used for a variety of applications due to their versatile properties and characteristics, this book discusses recent advances in synthesis methods, characterization, and applications of 0D -3D dimensional carbon nanomaterials. It is an essential resource for readers focusing on carbon nanomaterials research. - Explores the chemical properties of different classes of carbon nanomaterials and their major applications - Discusses recent advances in synthesis methods, characterization, and applications of 0D -3D dimensional carbon nanomaterials
Download or read book Adsorption from Aqueous Solution written by and published by . This book was released on 1968 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Adsorbents for Pollutant Removal written by Grégorio Crini and published by Springer. This book was released on 2018-07-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume on adsorption using green adsorbents and is written by international contributors who are the leading experts in the adsorption field. Together with the first volume they show a typical selection of green materials used in wastewater treatment, with emphasis on industrial effluents. This second volume focuses on innovative materials. It presents hemp-based materials for metal removal, and the use of leaves for metal removal. It describes the biosorption of metals and metalloids on various materials and discusses the recent advances in cellulose-based adsorbents used in environmental purposes. Furthermore, activated carbons from food wastes, aerogels and bones, and municipal solid waste biochar as efficient materials for pollutant removal, respectively are reviewed as well as biosorption of dyes onto microbial biosorbents and the use of mushroom biomass to remove pollutants are looked at. The volume also includes detailed review of green adsorbents for removal of antibiotics, pesticides and endocrine disruptors and the use of pillared interlayered clays as innovative materials for pollutant removal. Finally, the use of green adsorbents for radioactive pollutant removal from natural water is discussed. The audience for this book includes students, environmentalists, engineers, water scientists, civil and industrial personnel who wish to specialize in adsorption technology. Academically, this book will be of use to students in chemical and environmental engineering who wish to learn about adsorption and its fundamentals. It has also been compiled for practicing engineers who wish to know about recent developments on adsorbent materials in order to promote further research toward improving and developing newer adsorbents and processes for the efficient removal of pollutants from industrial effluents. It is hoped that the book will serve as a readable and useful presentation not only for undergraduate and postgraduate students but also for the water scientists and engineers and as a convenient reference handbook in the form of numerous recent examples and appended information.
Download or read book Materials from Natural Sources written by Ramesh Gardas and published by CRC Press. This book was released on 2024-10-03 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises interdisciplinary topics including consolidating research activities in all experimental and theoretical aspects of natural advanced materials in the fields of science, engineering, and medicine including structure, synthesis, processing, physico-chemical properties, and applications. The book covers formulation for natural and organic cosmetics, CO2 sequestration, drug delivery systems, biosensors, and other related topics. In addition, case studies including some data are presented that demonstrate the growing interest and cost benefits of biomaterials. The main features of the book are: It discusses the properties and applications of materials from natural sources from an environmental and biomedical engineering perspective. It explores properties of natural materials used in drug delivery, biofuel, adsorbents, waste water treatment, cosmetics, and so forth. It includes studies on recent and emerging biomaterials. It details applications of natural materials in varied areas. It introduces the structure and mechanisms of self-healing material, biomaterial, biofuel, polymers, and adsorbents. This book is aimed at graduate students and researchers in chemical, environmental, and natural resource engineering.
Download or read book Activated Carbon Adsorption written by Roop Chand Bansal and published by CRC Press. This book was released on 2005-05-24 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: High surface area, a microporous structure, and a high degree of surface reactivity make activated carbons versatile adsorbents, particularly effective in the adsorption of organic and inorganic pollutants from aqueous solutions. Activated Carbon Adsorption introduces the parameters and mechanisms involved in the activated carbon adsorption
Download or read book Proceedings of The First International Conference on Green Sciences written by Farid El-Dossoki and published by Springer Nature. This book was released on with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effluent Dye Removal by Microwave Assisted Activated Carbon written by Rehab Abdelghaffar and published by Springer Nature. This book was released on 2023-10-13 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the potential of advanced microwave techniques, specifically microwave-assisted pyrolysis, for the production, adsorption, and regeneration of activated carbon (AC) as a promising solution to address wastewater pollution caused by dyes. The author begins with a chapter devoted to the environmental implications of water pollution and emphasizes the characteristics of dyes and various treatment techniques for their removal. The advantages and disadvantages of commercially available activated carbon are also discussed, along with the determinants for effective adsorption using high-quality activated carbon. Additionally, the chapter delves into the different types of adsorbents, including agricultural and industrial waste, as well as bioadsorbents such as microorganisms. In Chapter 2, readers will find the latest trends in using microwave techniques for the activation process. In this chapter, the author elucidates the characteristics and mechanism of microwave heating and compares it with conventional heating methods. The advantages of microwave techniques, such as improved activation procedures and the influence of different factors, are explored. Various modeling and optimization approaches for adsorption and different techniques for analyzing the surface chemistry of activated carbons are also discussed. Furthermore, the chapter showcases the applications of microwave-assisted activated carbon for dye removal. The book closes with a chapter devoted to the recycling and regeneration of spent activated carbon (SAC) using microwave techniques. In this chapter, the author examines the procedures for SAC regeneration through microwave-assisted pyrolysis and highlights the advantages over conventional heating methods. The applications of microwave-assisted activated carbon regeneration and other miscellaneous technologies utilizing microwave heating for AC production and SAC regeneration are also explored. Given its breadth, this book is a valuable resource for researchers, professionals, and policymakers in the field of environmental science and engineering.
Download or read book Bioprocess Engineering for a Green Environment written by V. Sivasubramanian and published by CRC Press. This book was released on 2018-05-04 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocess Engineering for a Green Environment examines numerous bioprocesses that are crucial to our day-to-day life, specifically the major issues surrounding the production of energy relating to biofuels and waste management. The nuance of this discussion is reflected by the text’s chapter breakdown, providing the reader with a fulsome investigation of the energy sector; the importance of third-generation fuels; and the application of micro- and macroalgae for the production of biofuels. The book also provides a detailed exploration of biocatalysts and their application to the food industry; bioplastics production; conversion of agrowaste into polysaccharides; as well as the importance of biotechnology in bio-processing. Numerous industries discharge massive amounts of effluents into our rivers, seas, and air systems. As such, two chapters are dedicated to the treatment of various pollutants through biological operation with hopes of achieving a cleaner, greener, environment. This book represents the most comprehensive study of bioprocessing—and its various applications to the environment—available on the market today. It was furthermore written with various researchers in mind, ranging from undergraduate and graduate students looking to enhance their knowledge of the topics presented to scholars and engineers interested in the bioprocessing field, as well as members of industry and policy-makers. Provides a comprehensive overview of bioprocesses that apply to day-to-day living. Is learner-centered, providing detailed diagrams for easy understanding. Explores the importance of biocatalysts and their applications to the food industry, as well as bioplastics production. Examines the unique capabilities of bioprocess engineering and its ability to treat various pollutants. .
Download or read book Development in Wastewater Treatment Research and Processes written by Maulin P. Shah and published by Elsevier. This book was released on 2024-02-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Technologies for Removal of Pharmaceuticals and Personal Care Products: State of the Art, Challenges and Future Perspectives provides a holistic overview on the recent advances and challenges associated with pharmaceuticals and personal care products (PPCP) removal from water and wastewater. The book covers advanced remediation technologies such as microbial fuel cells (MFCs), microalgae and hybrid technologies and focuses on the environmental sustainability of each technology, using life cycle assessment. The book helps students and researchers in carrying out research on further advancements in the field and to how apply this to the real-world conditions. - Offers a comprehensive discussion of PPCP management and remediation, highlighting future perspectives - Provides access to the latest and novel information on PPCPs - Delivers easy access to state-of-the-art literature at one place
Download or read book Sustainable Green Chemical Processes and their Allied Applications written by Inamuddin and published by Springer Nature. This book was released on 2020-05-30 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urbanization, industrialization, and unethical agricultural practices have considerably negative effects on the environment, flora, fauna, and the health and safety of humanity. Over the last decade, green chemistry research has focused on discovering and utilizing safer, more environmentally friendly processes to synthesize products like organic compounds, inorganic compounds, medicines, proteins, enzymes, and food supplements. These green processes exist in other interdisciplinary fields of science and technology, like chemistry, physics, biology, and biotechnology, Still the majority of processes in these fields use and generate toxic raw materials, resulting in techniques and byproducts which damage the environment. Green chemistry principles, alternatively, consider preventing waste generation altogether, the atom economy, using less toxic raw materials and solvents, and opting for reducing environmentally damaging byproducts through energy efficiency. Green chemistry is, therefore, the most important field relating to the sustainable development of resources without harmfully impacting the environment. This book provides in-depth research on the use of green chemistry principles for a number of applications.
Download or read book Activated Carbon Surfaces in Environmental Remediation written by Teresa J. Bandosz and published by Elsevier. This book was released on 2006-02-27 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Carbon Surfaces in Environmental Remediation provides a comprehensive summary of the environmental applications of activated carbons. In order to understand the removal of contaminants and pollutants on activated carbons, the theoretical bases of adsorption phenomena are discussed. The effects of pore structure and surface chemistry are also addressed from both science and engineering perspectives. Each chapter provides examples of real applications with an emphasis on the role of the carbon surface in adsorption or reactive adsorption. The practical aspects addressed in this book cover the broad spectrum of applications from air and water cleaning and energy storage to warfare gas removal and biomedical applications. This book can serve as a handbook or reference book for graduate students, researchers and practitioners with an interest in filtration, water treatment, adsorbents and air cleaning, in addition to environmental policies and regulations. Addresses fundamental carbon science and how it relates to applications of carbon surfaces Describes the broad spectrum of activated carbon applications in environmental remediation Serves as a handbook or reference book for graduate students, researchers and practitioners in the field
Download or read book Utilization of Waste Biomass in Energy Environment and Catalysis written by Dan Bahadur Pal and published by CRC Press. This book was released on 2022-03-24 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass finds its application as feedstock to produce biofuels and other value-added products, which finds usage in energy and environmental areas with particular focus on bioenergy production from different biomass and high-volume, medium-value industrial products. This book investigates problems of controlled synthesis of these materials and the effect of their morphological, physical, and chemical characteristics on their adsorption or desorption capacity and recent progress in green catalysts derived from biomass for various catalytic applications. Socioeconomic impacts on environment and climate regarding waste biomass are discussed as well. Features Covers recent progress on green catalysts derived from biomass Explores the biomass conversion to different resources Introduces the utilization of biowaste in environmental aspects Discusses the biomass applications in different types of energy Proposes microbial waste biomass as a resource of renewable energy This book is aimed at professionals and senior undergraduate students in environmental sciences, energy studies, and environmental and chemical engineering.
Download or read book Green Adsorbents written by George Z. Kyzas and published by Bentham Science Publishers. This book was released on 2015-12-01 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption technology is a promising avenue for wastewater treatment. Numerous adsorbent materials are presently synthesized. Green or environmental friendly adsorbents are derived from plants and agricultural crop sources, giving them a very low production cost when compared to synthetic polymers. This monograph explains the basic principles of green adsorption technology, their production processes and strategies to remove different categories of environmental pollutants (dyes, heavy metals and phenols/pesticides). The book explains details in terms of features such as adsorption capacity, physico-chemical kinetics and reuse potential. A summary of the economics and future prospect for green adsorption technology is also given. This text is a handy reference for environmental chemistry students, researchers and policy makers.
