Download or read book Cocontinuous Polymer Blends written by Joel Richard Bell and published by . This book was released on 2007 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
Download or read book Compatibilization of Polymer Blends written by Ajitha A. R and published by Elsevier. This book was released on 2019-10-10 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compatibilization of Polymer Blends: Micro and Nano Scale Phase Morphologies, Interphase Characterization and Properties offers a comprehensive approach to the use of compatibilizers in polymer blends, examining both fundamental and advanced knowledge in the field. The book begins by introducing polymer blends, describing thermodynamics, miscibility, and phase separation, and explaining the main concepts of compatibilization. Other sections cover theoretical approaches for nearly compatible blends, incompatible blends, nanofillers, physical compatibilization, reactive compatibilization, morphological and structural characterization, and physico-mechanical characterization. Finally, key application areas are covered, including biomedical applications, packaging and automobile engineering. While this book will be a highly valuable reference source for academics, researchers and postgraduate students interested in polymer blends, it will also be ideal for anyone involved in the fields of polymer science, polymer chemistry, polymer physics, materials science, scientists, R&D professionals, and engineers in involved in the development or engineering of polymer products. - Offers detailed and systematic coverage of essential and advanced topics relating to the compatibilization of polymer blends - Presents a critical analysis of the effect of compatibilization on morphology and thermal, mechanical, electrical and viscoelastic properties of polymer blends - Draws on novel studies and state-of-the-art research, discussing the latest issues and developments
Download or read book Reactive Extrusion written by Günter Beyer and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive overview of reactive extrusion technology for over a decade combines the views of contributors from both academia and industry who share their experiences and highlight possible applications and markets. They also provide updated information on the underlying chemical and physical concepts, summarizing recent developments in terms of the material and machinery used. As a result, readers will find here a compilation of potential applications for reactive extrusion to access new and cost-effective polymeric materials, while using existing compounding machines.
Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.
Download or read book Nanostructured Immiscible Polymer Blends written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2019-09-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Immiscible Polymer Blends: Migration and Interface covers a wide range of nanoparticle types, emphasizing the mechanisms and parameters involved in the migration of nanofillers inside immiscible polymer blends. This book explores the influence of nanoparticle migration on the localization, and hence, morphology development, electrical conductivity, and met-rheological properties of blended composite materials. As the influence of solid particles, ranging in size from several hundred nanometers to a few microns in immiscible polymer blends has been extensively studied for use as compatibilizers, morphology stabilizers, and reinforcement agents, this book is a timely resource. - Outlines techniques used to prepare nanoparticles-modified immiscible polymer blend composites - Explains the structural and morphological development, and melt-state rheological behaviors of nanoparticles-modified immiscible polymer blend composites - Discusses major industrial applications
Download or read book Micro and Nanostructured Multiphase Polymer Blend Systems written by Charef Harrats and published by CRC Press. This book was released on 2005-09-29 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces focuses on the formation of phase morphology in polymer blends and copolymers and considers various types of blends including thermosets, thermoplastics, thermoplastic vulcanizates, and structured copolymers. The book carefully debates the processing
Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.
Download or read book Polymer Processing written by Donald G. Baird and published by John Wiley & Sons. This book was released on 2014-03-24 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental concepts coupled with practical, step-by-step guidance With its emphasis on core principles, this text equips readers with the skills and knowledge to design the many processes needed to safely and successfully manufacture thermoplastic parts. The first half of the text sets forth the general theory and concepts underlying polymer processing, such as the viscoelastic response of polymeric fluids and diffusion and mass transfer. Next, the text explores specific practical aspects of polymer processing, including mixing, extrusion dies, and post-die processing. By addressing a broad range of design issues and methods, the authors demonstrate how to solve most common processing problems. This Second Edition of the highly acclaimed Polymer Processing has been thoroughly updated to reflect current polymer processing issues and practices. New areas of coverage include: Micro-injection molding to produce objects weighing a fraction of a gram, such as miniature gears and biomedical devices New chapter dedicated to the recycling of thermoplastics and the processing of renewable polymers Life-cycle assessment, a systematic method for determining whether recycling is appropriate and which form of recycling is optimal Rheology of polymers containing fibers Chapters feature problem sets, enabling readers to assess and reinforce their knowledge as they progress through the text. There are also special design problems throughout the text that reflect real-world polymer processing issues. A companion website features numerical subroutines as well as guidance for using MATLAB®, IMSL®, and Excel to solve the sample problems from the text. By providing both underlying theory and practical step-by-step guidance, Polymer Processing is recommended for students in chemical, mechanical, materials, and polymer engineering.
Download or read book Nanostructured Polymer Blends written by Sabu Thomas and published by William Andrew. This book was released on 2013-11-28 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 30% of commercial polymers are blends or alloys or one kind or another. Nanostructured blends offer the scientist or plastics engineer a new range of possibilities with characteristics including thermodynamic stablility; the potential to improve material transparency, creep and solvent resistance; the potential to simultaneously increase tensile strength and ductility; superior rheological properties; and relatively low cost. Nanostructured Polymer Blends opens up immense structural possibilities via chemical and mechanical modifications that generate novel properties and functions and high-performance characteristics at a low cost. The emerging applications of these new materials cover a wide range of industry sectors, encompassing the coatings and adhesives industry, electronics, energy (photovoltaics), aerospace and medical devices (where polymer blends provide innovations in biocompatible materials). This book explains the science of nanostructure formation and the nature of interphase formations, demystifies the design of nanostructured blends to achieve specific properties, and introduces the applications for this important new class of nanomaterial. All the key topics related to recent advances in blends are covered: IPNs, phase morphologies, composites and nanocomposites, nanostructure formation, the chemistry and structure of additives, etc. - Introduces the science and technology of nanostructured polymer blends – and the procedures involved in melt blending and chemical blending to produce new materials with specific performance characteristics - Unlocks the potential of nanostructured polymer blends for applications across sectors, including electronics, energy/photovoltaics, aerospace/automotive, and medical devices (biocompatible polymers) - Explains the performance benefits in areas including rheological properties, thermodynamic stablility, material transparency, solvent resistance, etc.
Download or read book Amphiphilic Polymer Co networks written by Costas S Patrickios and published by Royal Society of Chemistry. This book was released on 2020-04-23 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amphiphilic polymer co-networks (APCNs) are a type of polymeric hydrogel, their hydrophobic polymer segments and hydrophilic components produce less aqueous swelling, giving better mechanical properties than conventional hydrogels. This new class of polymers is attracting increasing attention, resulting in further basic research on the system, as well as new applications. This book focuses on new developments in the field of APCNs, and is organised in four sections: synthesis, properties, applications and modelling. Co-network architectures included in the book chapters are mainly those deriving from hydrophobic macro-cross-linkers, representing the classical approach; however, more modern designs are also presented. Properties of interest discussed include aqueous swelling, thermophysical and mechanical properties, self-assembly, electrical actuation, and protein adsorption. Applications described in the book chapters include the use of co-networks as soft contact lenses, scaffolds for drug delivery and tissue engineering, matrices for heterogeneous biocatalysis, and membranes of controllable permeability. Finally, an important theory chapter on the modelling of the self-assembly of APCNs is also included. The book is suitable for graduate students and researchers interested in hydrogels, polymer networks, polymer chemistry, block copolymers, self-assembly and nanomaterials, as well as their applications in contact lenses, drug delivery, tissue engineering, membranes and biocatalysis.
Download or read book Nanofillers for Binary Polymer Blends written by Sabu Thomas and published by Elsevier. This book was released on 2024-06-28 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofillers for Binary Polymer Blends covers major advances in the field of polymer-blend nanocomposites. The book encompasses the fundamentals of polymer blends, various nanofillers, experimental techniques used in their fabrication, the characterization of various polymer blend nanocomposites, and theoretical evaluations of various properties. The properties and potential applications that have been achieved in various polymer blends by the addition of nanofillers are also highlighted. Applications for commercial products, including automotive parts, packaging, construction materials, biotechnology, medical devices, building materials, computer housings, car interiors, etc., are also covered in detail.This is an important reference source for materials scientists and engineers looking to increase their understanding of how nanofillers are being used in polymer blends. - Outlines the various types of nanofillers, explaining how the properties of each enhances the morphology, rheology, mechanical, dynamic mechanical, viscoelastic, electrical and thermal properties of polymer blends - Provides information on the theory, modeling and simulation of nano-filled polymer blends - Assesses the mechanism of selective localization of nanofillers in polymer blends, the effect of localization of nanofillers on the microstructure, and the relative performance of polymer blends
Download or read book Nanostructured Polymer Blends written by Emmanuel Rotimi Sadiku and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Great progress has been made in the science and technology of polymer-based nanomaterials over the last decade. Nanostructured polymer systems have attracted much scientific and applied research interest. The last two decades have witnessed significant advances in polymer science and technology generally, but more so for polymer blends. The idea of blending two (or more) polymers, especially immiscible blends, has come with a lot of challenges. Achieving this has brought to the fore the art and science (and engineering) of compatibilization. During the last few decades, the addition of nanoparticles, nanowires, nanotubes, and so on has advanced even further the creation of blends, alloys, and composites with different polymers. In making these blends, intermediaries such as compatibilizers, coupling agents, and other additives are often employed to bring about blends that are satisfactory for the purposes they are intended to serve. Nanostructured polymer blends formation has strongly improved the properties and structural integrities of polymer blends, by employing compatibilization as a tool to achieve such properties and structural integrities of polymer blends. Reinforcing compatibilized polymer blends with nanosize additives has further strengthened the properties and integrities of polymer blends, alloys, and composites.
Download or read book Micro and Nanostructured Multiphase Polymer Blend Systems written by Charef Harrats and published by CRC Press. This book was released on 2005-09-29 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces focuses on the formation of phase morphology in polymer blends and copolymers and considers various types of blends including thermosets, thermoplastics, thermoplastic vulcanizates, and structured copolymers. The book carefully debates the processing
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-24 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book Commercial Polymer Blends written by L.A. Utracki and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in depth and unparalleled presentation of the compositions of virtually all polymer blends.
Download or read book Rheology of Polymer Blends and Nanocomposites written by Sabu Thomas and published by Elsevier. This book was released on 2019-09-08 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology of Polymer Blends and Nanocomposites: Theory, Modelling and Applications focuses on rheology in polymer nanocomposites. It provides readers with a solid grounding in the fundamentals of rheology, with an emphasis on recent advancements. Chapters explore potential future applications for nanocomposites and polymer blends, giving readers a thorough understanding of the specific features derived from rheology as a tool for the study of polymer blends and nanocomposites. This book is ideal for industrial and academic researchers in the field of polymer blends and nanocomposites, but is also a great resource for anyone who wants to learn about the applications of rheology. - Sets out the principles of rheology as it is applied to polymer blends and nanocomposites - Demonstrates how rheological techniques are best applied to different classes of nanocomposites - Assesses the opportunities and major challenges of rheological approaches to polymer blends and nanocomposites
