Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-08-30 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book Tires and Passenger Vehicle Fuel Economy written by and published by Transportation Research Board. This book was released on 2006 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Materials and Pavement Prediction written by Eyad Masad and published by CRC Press. This book was released on 2018-07-16 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Materials and Pavement Performance Prediction contains the papers presented at the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P, Doha, Qatar, 16- 18 April 2018). There has been an increasing emphasis internationally in the design and construction of sustainable pavement systems. Advances in Materials and Pavement Prediction reflects this development highlighting various approaches to predict pavement performance. The contributions discuss links and interactions between material characterization methods, empirical predictions, mechanistic modeling, and statistically-sound calibration and validation methods. There is also emphasis on comparisons between modeling results and observed performance. The topics of the book include (but are not limited to): • Experimental laboratory material characterization • Field measurements and in situ material characterization • Constitutive modeling and simulation • Innovative pavement materials and interface systems • Non-destructive measurement techniques • Surface characterization, tire-surface interaction, pavement noise • Pavement rehabilitation • Case studies Advances in Materials and Pavement Performance Prediction will be of interest to academics and engineers involved in pavement engineering.
Download or read book Truck Technology International written by and published by . This book was released on 1988 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Ground Vehicles written by J. Y. Wong and published by John Wiley & Sons. This book was released on 2001-03-20 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated edition of the classic reference on the dynamics of road and off-road vehicles As we enter a new millennium, the vehicle industry faces greater challenges than ever before as it strives to meet the increasing demand for safer, environmentally friendlier, more energy efficient, and lower emissions products. Theory of Ground Vehicles, Third Edition gives aspiring and practicing engineers a fundamental understanding of the critical factors affecting the performance, handling, and ride essential to the development and design of ground vehicles that meet these requirements. As in previous editions, this book focuses on applying engineering principles to the analysis of vehicle behavior. A large number of practical examples and problems are included throughout to help readers bridge the gap between theory and practice. Covering a wide range of topics concerning the dynamics of road and off-road vehicles, this Third Edition is filled with up-to-date information, including: * The Magic Formula for characterizing pneumatic tire behavior from test data for vehicle handling simulations * Computer-aided methods for performance and design evaluation of off-road vehicles, based on the author's own research * Updated data on road vehicle transmissions and operating fuel economy * Fundamentals of road vehicle stability control * Optimization of the performance of four-wheel-drive off-road vehicles and experimental substantiation, based on the author's own investigations * A new theory on skid-steering of tracked vehicles, developed by the author.
Download or read book Review of the 21st Century Truck Partnership written by National Research Council and published by National Academies Press. This book was released on 2008-10-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 21st Century Truck Partnership (21CTP), a cooperative research and development partnership formed by four federal agencies with 15 industrial partners, was launched in the year 2000 with high hopes that it would dramatically advance the technologies used in trucks and buses, yielding a cleaner, safer, more efficient generation of vehicles. Review of the 21st Century Truck Partnership critically examines and comments on the overall adequacy and balance of the 21CTP. The book reviews how well the program has accomplished its goals, evaluates progress in the program, and makes recommendations to improve the likelihood of the Partnership meeting its goals. Key recommendations of the book include that the 21CTP should be continued, but the future program should be revised and better balanced. A clearer goal setting strategy should be developed, and the goals should be clearly stated in measurable engineering terms and reviewed periodically so as to be based on the available funds.
Download or read book Vehicle Powertrain Systems written by David Crolla and published by John Wiley & Sons. This book was released on 2011-12-30 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: The powertrain is at the heart of vehicle design; the engine – whether it is a conventional, hybrid or electric design – provides the motive power, which is then managed and controlled through the transmission and final drive components. The overall powertrain system therefore defines the dynamic performance and character of the vehicle. The design of the powertrain has conventionally been tackled by analyzing each of the subsystems individually and the individual components, for example, engine, transmission and driveline have received considerable attention in textbooks over the past decades. The key theme of this book is to take a systems approach – to look at the integration of the components so that the whole powertrain system meets the demands of overall energy efficiency and good drivability. Vehicle Powertrain Systems provides a thorough description and analysis of all the powertrain components and then treats them together so that the overall performance of the vehicle can be understood and calculated. The text is well supported by practical problems and worked examples. Extensive use is made of the MATLAB(R) software and many example programmes for vehicle calculations are provided in the text. Key features: Structured approach to explaining the fundamentals of powertrain engineering Integration of powertrain components into overall vehicle design Emphasis on practical vehicle design issues Extensive use of practical problems and worked examples Provision of MATLAB(R) programmes for the reader to use in vehicle performance calculations This comprehensive and integrated analysis of vehicle powertrain engineering provides an invaluable resource for undergraduate and postgraduate automotive engineering students and is a useful reference for practicing engineers in the vehicle industry
Download or read book Driving and Engine Cycles written by Evangelos G. Giakoumis and published by Springer. This book was released on 2016-12-09 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in detail the most important driving and engine cycles used for the certification and testing of new vehicles and engines around the world. It covers chassis and engine-dynamometer cycles for passenger cars, light-duty vans, heavy-duty engines, non-road engines and motorcycles, offering detailed historical information and critical review. The book also provides detailed examples from SI and diesel engines and vehicles operating during various cycles, with a focus on how the engine behaves during transients and how this is reflected in emitted pollutants, CO2 and after-treatment systems operation. It describes the measurement methods for the testing of new vehicles and essential information on the procedure for creating a driving cycle. Lastly, it presents detailed technical specifications on the most important chassis-dynamometer cycles around the world, together with a direct comparison of those cycles.
Download or read book The Automotive Transmission Book written by Robert Fischer and published by Springer. This book was released on 2015-05-11 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential information on systems and interactions in automotive transmission technology and outlines the methodologies used to analyze and develop transmission concepts and designs. Functions of and interactions between components and subassemblies of transmissions are introduced, providing a basis for designing transmission systems and for determining their potentials and properties in vehicle-specific applications: passenger cars, trucks, buses, tractors and motorcycles. With these fundamentals the presentation provides universal resources for both state-of-the-art and future transmission technologies, including systems for electric and hybrid electric vehicles.
Download or read book Cumulative Index of The SAE Papers written by Society of Automotive Engineers and published by . This book was released on 1965 with total page 1646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium and Heavy duty Engines and Vehicles written by and published by . This book was released on 2012 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Automotive Fault Diagnosis written by Tom Denton and published by Routledge. This book was released on 2006-08-14 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostics, or fault finding, is a fundamental part of an automotive technician's work, and as automotive systems become increasingly complex there is a greater need for good diagnostic skills. Advanced Automotive Fault Diagnosis is the only book to treat automotive diagnostics as a science rather than a check-list procedure. Each chapter includes basic principles and examples of a vehicle system followed by the appropriate diagnostic techniques, complete with useful diagrams, flow charts, case studies and self-assessment questions. The book will help new students develop diagnostic skills and help experienced technicians improve even further. This new edition is fully updated to the latest technological developments. Two new chapters have been added – On-board diagnostics and Oscilloscope diagnostics – and the coverage has been matched to the latest curricula of motor vehicle qualifications, including: IMI and C&G Technical Certificates and NVQs; Level 4 diagnostic units; BTEC National and Higher National qualifications from Edexcel; International Motor Vehicle qualifications such as C&G 3905; and ASE certification in the USA.
Download or read book Submarine Cables and the Oceans written by L. Carter and published by UNEP/Earthprint. This book was released on 2009 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many things and services in our everyday life that we take for granted, and telecommunications is one of them. We surf the internet, send emails to friends and colleagues abroad, talk to family members in foreign countries over the phone, book airline seats and make banking transactions without actually realizing and appreciating the sophisticated technology that enables us to do so. This report covers the history and nature of cables, their special status in international law, their interaction with the environment and other ocean users and, finally, the challenges of the future. It is an evidence-based synopsis that aims to improve the quality and availability of information to enhance understanding and cooperation between all stakeholders. UNEP-WCMC in collaboration with the International Cable Protection Committee and UNEP has prepared this new report to provide an objective, factual description of the sub-marine cable industry and the interaction of submarine telecommunications (which route 95% of all international communications traffic) with the marine environment. This important report seeks to focus and guide deliberations and decision making on the wise conservation and protection of the oceans in concert with their sustainable management and use.
Download or read book Electric Vehicle Technology Explained written by James Larminie and published by John Wiley & Sons. This book was released on 2012-07-11 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated throughout, Electric Vehicle Technology, Second Edition, is a complete guide to the principles, design and applications of electric vehicle technology. Including all the latest advances, it presents clear and comprehensive coverage of the major aspects of electric vehicle development and offers an engineering-based evaluation of electric motor scooters, cars, buses and trains. This new edition includes: important new chapters on types of electric vehicles, including pickup and linear motors, overall efficiencies and energy consumption, and power generation, particularly for zero carbon emissions expanded chapters updating the latest types of EV, types of batteries, battery technology and other rechargeable devices, fuel cells, hydrogen supply, controllers, EV modeling, ancillary system design, and EV and the environment brand new practical examples and case studies illustrating how electric vehicles can be used to substantially reduce carbon emissions and cut down reliance on fossil fuels futuristic concept models, electric and high-speed trains and developments in magnetic levitation and linear motors an examination of EV efficiencies, energy consumption and sustainable power generation. MATLAB® examples can be found on the companion website www.wiley.com/go/electricvehicle2e Explaining the underpinning science and technology, this book is essential for practicing electrical, automotive, power, control and instrumentation engineers working in EV research and development. It is also a valuable reference for academics and students in automotive, mechanical, power and electrical engineering.
Download or read book The Automotive Chassis written by Giancarlo Genta and published by Springer Nature. This book was released on 2019-12-24 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook draws on the authors’ experience gained by teaching courses for engineering students on e.g. vehicle mechanics, vehicle system design, and chassis design; and on their practical experience as engineering designers for vehicle and chassis components at a major automotive company. The book is primarily intended for students of automotive engineering, but also for all technicians and designers working in this field. Other enthusiastic engineers will also find it to be a useful technical guide. The present volume (The Automotive Chassis – Volume 1: Component Design) focuses on automotive chassis components, such as:• the structure, which is usually a ladder framework and supports all the remaining components of the vehicle;• the suspension for the mechanical linkage of the wheels;• the wheels and tires;• the steering system;• the brake system; and• the transmission system, used to apply engine torque to the driving wheels. This thoroughly revised and updated second edition presents recent developments, particularly in brake, steering, suspension and transmission subsystems. Special emphasis is given to modern control systems and control strategies.
Download or read book Fundamentals of Machine Component Design written by Robert C. Juvinall and published by John Wiley & Sons. This book was released on 2020-06-23 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Machine Component Design presents a thorough introduction to the concepts and methods essential to mechanical engineering design, analysis, and application. In-depth coverage of major topics, including free body diagrams, force flow concepts, failure theories, and fatigue design, are coupled with specific applications to bearings, springs, brakes, clutches, fasteners, and more for a real-world functional body of knowledge. Critical thinking and problem-solving skills are strengthened through a graphical procedural framework, enabling the effective identification of problems and clear presentation of solutions. Solidly focused on practical applications of fundamental theory, this text helps students develop the ability to conceptualize designs, interpret test results, and facilitate improvement. Clear presentation reinforces central ideas with multiple case studies, in-class exercises, homework problems, computer software data sets, and access to supplemental internet resources, while appendices provide extensive reference material on processing methods, joinability, failure modes, and material properties to aid student comprehension and encourage self-study.