Download or read book Coal Combustion Modelling written by Stephen Niksa and published by . This book was released on 1996 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Coal Combustion Modelling written by Department of Trade and Industry, London (GB). Cleaner Coal Technology Programme and published by . This book was released on 2001 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Modeling of Pulverized Coal Fired Boilers written by Vivek V. Ranade and published by CRC Press. This book was released on 2014-12-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Harness State-of-the-Art Computational Modeling Tools Computational Modeling of Pulverized Coal Fired Boilers successfully establishes the use of computational modeling as an effective means to simulate and enhance boiler performance. This text factors in how computational flow models can provide a framework for developing a greater understanding of the underlying processes in PC boilers. It also provides a detailed account of the methodology of computational modeling of pulverized coal boilers, as well as an apt approach to modeling complex processes occurring in PC boilers in a manageable way. Connects Modeling with Real-Life Applications Restricted to the combustion side of the boiler (the authors assume some prior background of reaction engineering and numerical techniques), the book describes the individual aspects of combustion and heat recovery sections of PC boilers that can be used to further improve the design methodologies, optimize boiler performance, and solve practical boiler-related problems. The book provides guidelines on implementing the material in commercial CFD solvers, summarizes key points, and presents relevant case studies. It can also be used to model larger boilers based on conventional, super-critical, or ultra-super critical technologies as well as based on oxy-fuel technologies. Consisting of six chapters, this functional text: Provides a general introduction Explains the overall approach and methodology Explores kinetics of coal pyrolysis (devolatilization) and combustion and methods of its evaluation Presents computational flow modeling approach to simulate pulverized coal fired boiler Covers modeling aspects from formulation of model equations to simulation methodology Determines typical results obtained with computational flow models Discusses the phenomenological models or reactor network models Includes practical applications of computational modeling Computational Modeling of Pulverized Coal Fired Boilers explores the potential of computational models for better engineering of pulverized coal boilers, providing an ideal resource for practicing engineers working in utility industries. It also benefits boiler design companies, industrial consultants, R & D laboratories, and engineering scientists/research students.
Download or read book Advanced Coal Combustion Modelling written by Great Britain. Cleaner Coal Technology Programme and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal Combustion and Gasification written by L.Douglas Smoot and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of coal is required to help satisfy the world's energy needs. Yet coal is a difficult fossil fuel to consume efficiently and cleanly. We believe that its clean and efficient use can be increased through improved technology based on a thorough understanding of fundamental physical and chemical processes that occur during consumption. The principal objective of this book is to provide a current summary of this technology. The past technology for describing and analyzing coal furnaces and combus tors has relied largely on empirical inputs for the complex flow and chemical reactions that occur while more formally treating the heat-transfer effects. GrOWing concern over control of combustion-generated air pollutants revealed a lack of understanding of the relevant fundamental physical and chemical mechanisms. Recent technical advances in computer speed and storage capacity, and in numerical prediction of recirculating turbulent flows, two-phase flows, and flows with chemical reaction have opened new opportunities for describing and modeling such complex combustion systems in greater detail. We believe that most of the requisite component models to permit a more fundamental description of coal combustion processes are available. At the same time there is worldwide interest in the use of coal, and progress in modeling of coal reaction processes has been steady.
Download or read book The Numerical Characteristics and Simulation Procedure for Coal Combustion Modeling written by Saputra and published by . This book was released on 1995 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid Fuels Combustion and Gasification written by Marcio L. de Souza-Santos and published by CRC Press. This book was released on 2004-06-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between theory and application, this reference demonstrates the operational mechanisms, modeling, and simulation of equipment for the combustion and gasification of solid fuels. Solid Fuels Combustion and Gasification: Modeling, Simulation, and Equipment Operation clearly illustrates procedures to improve and optimize the de
Download or read book Pulverized Coal Combustion and Gasification written by L. Smoot and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: viii and approaches could be adapted to other coal conversion and combustion problems, we have not considered combustion or gasification in fluidized or fixed beds or in situ processes. In addition, we have not considered other fossil-fuel combustion problems associated with oil shale, tar sands, etc., even though many aspects of pulverized-coal combustion would relate to these problems. For the case of pulverized-coal models, we have attempted to provide a detailed description of the model foundations. Parts I and II of this book emphasize general principles for describing reacting, turbulent or laminar, multiphase systems. General conservation equations are developed and summarized. The basis for computing thermochemical equilibrium in complex, heterogeneous mixtures is presented, together with techniques for rapid computation and reference to required input data. Rate processes are then discussed, including pertinent aspects of turbulence, chemical kinetics, radiative heat transfer, and gas-particle convective-diffusive interactions. Much of Part II deals with parameters and coefficients for describing these complex rate processes. This part of the book provides recommended values of coefficients and parameters for treating complex reacting flows. Parts I and II may well be suitable for use in an advanced course in reacting flows, and have been written partly with that in mind. Part III deals with more specific aspects of pulverized-coal characteristics and rate processes. Following a general description of coal structure and constitution, coal pyrolysis and char oxidation processes are considered.
Download or read book Mathematical Modeling for Coal Combustion written by Anil Samale and published by LAP Lambert Academic Publishing. This book was released on 2010-12 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: In India power generation is carried out through coal based power plants. The efficiency of coal power plants depends on coal combustion phenomenon. Hence there is need for understanding of coal combustion. Study of coal combustion through experimentation is tedious and expensive. This leads to use modeling techniques for understanding coal combustion. Therefore present book explains about the development of a model to describe coal combustion. The model presented in this work couples the heat transfer equation with the chemical kinetics equations. The combustion rate has been modeled by considering the first order reaction. The dependence of the convective and radiative heat transfer coefficient on Nusselt number is incorporated in present work. A finite volume method is used for solving heat transfer equation and Runge- Kutta fourth order method for the chemical kinetics equations. The model explained in present book is useful in power generation domain. The present work is helpful for research scholars and professionals who believe power of modeling.
Download or read book Coal Combustion Simulation Using One dimensional Turbulence Model written by Babak Goshayeshi and published by . This book was released on 2014 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas written by Dobrin Toporov and published by Elsevier. This book was released on 2014-05-30 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas focuses on a niche technology, combustion of coal in an oxygen rich environment, which is one approach to obtaining 'clean coal,' by making it easier to capture carbon that is released in the combustion process. Toporov's book breaks ground on covering the key fundamentals of oxycoal technologies, which have not yet been covered in this depth. Combustion of Pulverised Coal in a Mixture of Oxygen and Recycled Flue Gas summarizes the main results from a pioneering work on experimental and numerical investigations of oxyfuel technologies. It provides the theoretical background of the process, the problems to be faced, and the technical solutions that were achieved during these investigations. - Summarizes results from investigations of oxyfuel technologies performed at Aachen University, Germany - Provides theoretical background, as well as the primary problems of these technologies and how they can be solved
Download or read book Clean Coal and Sustainable Energy written by Junfu Lyu and published by Springer Nature. This book was released on 2021-09-29 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 9th International Symposium on Coal Combustion, held in Qingdao, China in July 2019. It provides the latest research results on techniques for pulverized coal combustion and fluidized bed combustion, low-carbon energy and emission controls, and industrial applications. Highlighting research areas that are of great importance in promoting collaboration between related subjects and the technical development of coal-related fields, the book offers a valuable reference guide for researchers and engineers alike.
Download or read book Fundamentals of Coal Combustion written by Leon Douglas Smoot and published by Elsevier Publishing Company. This book was released on 1993 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a broad, integrated treatment of the fundamentals of coal combustion and gasification. Most of the authors are recognized professionals in the field and all are conducting research work in the Advanced Combustion Engineering Research Center. The focus of the book is on clean and efficient use of coal. Practical chapters on coal processes, including coal technology projects and on acid rain formation control, lay a foundation for the fundamental treatment. The book is comprehensive in its treatment with over 1000 world-wide references, most of which are from the past five years.
Download or read book An Introduction to Combustion written by Stephen R. Turns and published by McGraw-Hill Education. This book was released on 2012 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Combustion is the leading combustion textbook for undergraduate and graduate students because of its easy-to-understand analyses of basic combustion concepts and its introduction of a wide variety of practical applications that motivate or relate to the various theoretical concepts. This is a text that is useful for junior/senior undergraduates or graduate students in mechanical engineering and practicing engineers. The third edition updates and adds topics related to protection of the environment, climate change, and energy use. Additionally, a new chapter is added on fuels due to the continued focus on conservation and energy independence.
Download or read book Hydrodynamic Behaviour and Coal Combustion Modelling of a Circulating Fluidised Bed written by Xio Shan Wang and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Improved Coal Combustion Model in Two Dimensional Chamber written by G. S. Aslanjan and published by . This book was released on 1998 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Modeling of Underground Coal Gasification written by Vivek V. Ranade and published by CRC Press. This book was released on 2019-07-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with development of comprehensive computational models for simulating underground coal gasification (UCG). It starts with an introduction to the UCG process and process modelling inputs in the form of reaction kinetics, flow patterns, spalling rate, and transport coefficient that are elaborated with methods to generate the same are described with illustrations. All the known process models are reviewed, and relative merits and limitations of the modeling approaches are highlighted and compared. The book describes all the necessary steps required to determine the techno-economic feasibility of UCG process for a given coal reserve, through modeling and simulation.
