Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Methanol Synthesis written by Jerzy Skrzypek and published by . This book was released on 1994 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.

Download or read book Catalytic Hydrogenation written by L. Cervený and published by Elsevier. This book was released on 1986-08-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of contributions in this volume presents the most up-to-date findings in catalytic hydrogenation. The individual chapters have been written by 36 top specialists each of whom has achieved a remarkable depth of coverage when dealing with his particular topic. In addition to detailed treatment of the most recent problems connected with catalytic hydrogenations, the book also contains a number of previously unpublished results obtained either by the authors themselves or within the organizations to which they are affiliated.Because of its topical and original character, the book provides a wealth of information which will be invaluable not only to researchers and technicians dealing with hydrogenation, but also to all those concerned with homogeneous and heterogeneous catalysis, organic technology, petrochemistry and chemical engineering.

Download or read book Fundamentals written by Michael North and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-10-21 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conversion of CO2 to chemicals and consumables is a pioneering approach to utilize undesired CO2 emissions and simultaneously create new products out of sustainable feedstock. Volume 1 gives an introduction to CO2 chemistry, utilisation and sustainability and further discusses its capture and separation. Both volumes are also included in a set ISBN 978-3-11-066549-9.

Download or read book Reaction Mechanisms in Carbon Dioxide Conversion written by Michele Aresta and published by Springer. This book was released on 2015-11-07 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an analysis of the reaction mechanisms relevant to a number of processes in which CO2 is converted into valuable products. Several different processes are considered that convert CO2 either in specialty chemicals or in bulk products or fuels. For each reaction, the mechanism is discussed and the assessed steps besides the dark sites of the reaction pathway are highlighted. From the insertion of CO2 into E-X bonds to the reduction of CO2 to CO or other C1 molecules or else to C2 or Cn molecules, the reactions are analysed in order to highlight the known and obscure reaction steps. Besides well known reaction mechanisms and energy profiles, several lesser known situations are discussed. Advancing knowledge of the latter would help to develop efficient routes for the conversion of CO2 into valuable products useful either in the chemical or in the energy industry. The content of this book is quite different from other books reporting the use of CO2. On account of its clear presentation, “Reaction Mechanisms in Carbon Dioxide Conversion” targets in particular researchers, teachers and PhD students.

Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Catalysis written by F J J G Janssen and published by World Scientific. This book was released on 1999-04-14 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together highlights of a theme which is growing in interest: the creation of a sustainable society using catalysis as the main tool. Catalysts play key roles in the production of clean fuels, the conversion of waste and green raw materials into energy, clean combustion engines including control of NOx and soot production and reduction of greenhouse gases, production of clean water and of polymers, as well as reduction from polymers to monomers. Catalysts are also of prime importance in the developing H2 and syngas production technology, aimed at producing clean fuels for the coming decades. And catalysts can be recycled.

Download or read book Carbon Dioxide Utilization for Global Sustainability written by Sang-Eon Park and published by Elsevier. This book was released on 2004-10-27 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing global environmental problems, such as global warming is essential to global sustainability. Continued research leads to advancement in standard methods and produces new data. Carbon Dioxide Utilization for Global Sustainability: Proceedings of the 7th ICCDU (International Conference on Carbon Dioxide Utilization) reflects the most recent research results, as well as stimulating scientific discussions with new challenges in advancing the development of carbon dioxide utilization. Drawing on a wealth of information, this well structured book will benefit students, researchers and consultants looking to catch up on current developments in environmental and chemical engineering.* Provides comprehensive data on CO2 utilisation* Contains up-to-date information, including recent research trends* Is written for students, researchers and consultants in environmental and chemical engineering

Download or read book Coal Abstracts written by and published by . This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials and Molecular Research Division Annual Report written by Lawrence Berkeley Laboratory. Materials and Molecular Research Division and published by . This book was released on 1986 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Petrochemical Catalyst Materials Processes and Emerging Technologies written by Al-Megren, Hamid and published by IGI Global. This book was released on 2016-02-17 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: ###############################################################################################################################################################################################################################################################

Download or read book Characterization of Solid Materials and Heterogeneous Catalysts written by Michel Che and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.

Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.

Download or read book Catalyst Separation Recovery and Recycling written by David J. Cole-Hamilton and published by Springer Science & Business Media. This book was released on 2006-01-13 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at new ways of tackling the problem of separating reaction products from homogeneous catalytic solutions. The new processes involve low leaching supported catalysts, soluble supports such as polymers and dendrimers and unusual solvents such as water, fluorinated organics, ionic liquids and supercritical fluids. The advantages of the different possibilities are discussed alongside suggestions for further research that will be required for commercialisation. Unlike other books, in addition to the chemistry involved, the book looks at the process design that would be required to bring the new approaches to fruition. Comparisons are given with existing processes that have already been successfully applied and examples are given where these approaches are not suitable. The book includes: - New processes for the separation of products from solutions containing homogeneous catalysts - Catalysts on insoluble or soluble supports – fixed bed catalysts - continuous flow or ultrafiltration - Biphasic systems: water - organic, fluorous - organic, ionic liquid – organic, supercritical fluids (monophasic or biphasic with water, organic or ionic liquid) - Comparisons with current processes involving atmospheric or low temperature distillation - Consideration of Chemistry and Process Design - Advantages and disadvantages of each process exposed - Consideration of what else is need for commercialisation

Download or read book Design of Heterogeneous Catalysts written by Umit S. Ozkan and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long-awaited reference source is the first book to focus on this important and hot topic. As such, it provides examples from a wide array of fields where catalyst design has been based on new insights and understanding, presenting such modern and important topics as self-assembly, nature-inspired catalysis, nano-scale architecture of surfaces and theoretical methods. With its inclusion of all the useful and powerful tools for the rational design of catalysts, this is a true "must have" book for every researcher in the field.

Download or read book Methanation Catalysts written by G. H. Watson and published by . This book was released on 1980 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: