Download or read book CMOS Current Mode Circuits for Data Communications written by Fei Yuan and published by Springer Science & Business Media. This book was released on 2007-04-26 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis and design of CMOS current-mode circuits for data communications. CMOS current-mode sampled-data networks, i.e. switched-current circuits, are excluded. Major subjects covered in the book include: a critical comparison of voltage-mode and current-mode circuits; the building blocks of current-mode circuits: design techniques; modeling of wire channels, electrical signaling for Gbps data communications; ESD protection for current-mode circuits and more. This book will appeal to IC design engineers, hardware system engineers and others.

Download or read book High speed Integrated Circuit Technology written by Mark J. W. Rodwell and published by World Scientific. This book was released on 2001 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the state of the art of very high speed digital integrated circuits. Commercial applications are in fiber optic transmission systems operating at 10, 40, and 100 Gb/s, while the military application is ADCs and DACs for microwave radar. The book contains detailed descriptions of the design, fabrication, and performance of wideband Si/SiGe-, GaAs-, and InP-based bipolar transistors. The analysis, design, and performance of high speed CMOS, silicon bipolar, and III-V digital ICs are presented in detail, with emphasis on application in optical fiber transmission and mixed signal ICs. The underlying physics and circuit design of rapid single flux quantum (RSFQ) superconducting logic circuits are reviewed, and there is extensive coverage of recent integrated circuit results in this technology. Contents: Preface (M J W Rodwell); High-Speed and High-Data-Bandwidth Transmitter and Receiver for Multi-Channel Serial Data Communication with CMOS Technology (M Fukaishi et al.); High-Performance Si and SiGe Bipolar Technologies and Circuits (M Wurzer et al.); Self-Aligned Si BJT/SiGe HBT Technology and Its Application to High-Speed Circuits (K Washio); Small-Scale InGaP/GaAs Heterojunction Bipolar Transistors for High-Speed and Low-Power Integrated-Circuit Applications (T Oka et al.); Prospects of InP-Based IC Technologies for 100-Gbit/S-Class Lightwave Communications Systems (T Enoki et al.); Scaling of InGaAs/InAlAs HBTs for High Speed Mixed-Signal and mm-Wave ICs (M J W Rodwell); Progress Toward 100 GHz Logic in InP HBT IC Technology (C H Fields et al.); Cantilevered Base InP DHBT for High Speed Digital Applications (A L Gutierrez-Aitken et al.); RSFQ Technology: Physics and Devices (P Bunyk et al.); RSFQ Technology: Circuits and Systems (D K Brock). Readership: Researchers, industrialists and academics in electrical and electronic engineering.

Download or read book CMOS Multichannel Single Chip Receivers for Multi Gigabit Optical Data Communications written by Paul Muller and published by Springer Science & Business Media. This book was released on 2007-10-29 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the world of optical data communications this book will be an absolute must-read. It focuses on optical communications for short and very short distance applications and discusses the monolithic integration of optical receivers with processing elements in standard CMOS technologies. What’s more, it provides the reader with the necessary background knowledge to fully understand the trade-offs in short-distance communication receiver design and presents the key issues to be addressed in the development of such receivers in CMOS technologies. Moreover, novel design approaches are presented.

Download or read book Design of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible. The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O. Contents: Achieving Analog Accuracy in Nanometer CMOS (M P Flynn et al.); Self-Induced Noise in Integrated Circuits (R Gharpurey & S Naraghi); High-Speed Oversampling Analog-to-Digital Converters (A Gharbiya et al.); Designing LC VCOs Using Capacitive Degeneration Techniques (B Jung & R Harjani); Fully Integrated Frequency Synthesizers: A Tutorial (S T Moon et al.); Recent Advances and Design Trends in CMOS Radio Frequency Integrated Circuits (D J Allstot et al.); Equalizers for High-Speed Serial Links (P K Hanumolu et al.); Low-Power, Parallel Interface with Continuous-Time Adaptive Passive Equalizer and Crosstalk Cancellation (C P Yue et al.). Readership: Technologists, scientists, and engineers in the field of high-speed communication circuits. It can also be used as a textbook for graduate and advanced undergraduate courses.

Download or read book Radiation Hardened CMOS Integrated Circuits for Time Based Signal Processing written by Jeffrey Prinzie and published by Springer. This book was released on 2018-04-26 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art techniques for radiation hardened high-resolution Time-to-Digital converters and low noise frequency synthesizers. Throughout the book, advanced degradation mechanisms and error sources are discussed and several ways to prevent such errors are presented. An overview of the prerequisite physics of nuclear interactions is given that has been compiled in an easy to understand chapter. The book is structured in a way that different hardening techniques and solutions are supported by theory and experimental data with their various tradeoffs. Based on leading-edge research, conducted in collaboration between KU Leuven and CERN, the European Center for Nuclear Research Describes in detail advanced techniques to harden circuits against ionizing radiation Provides a practical way to learn and understand radiation effects in time-based circuits Includes an introduction to the underlying physics, circuit design, and advanced techniques accompanied with experimental data

Download or read book Design of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible.The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O.

Download or read book Analog Circuit Design written by Michiel Steyaert and published by Springer Science & Business Media. This book was released on 2008-09-19 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Circuit Design contains the contribution of 18 tutorials of the 17th workshop on Advances in Analog Circuit Design. Each part discusses a specific to-date topic on new and valuable design ideas in the area of analog circuit design. Each part is presented by six experts in that field and state of the art information is shared and overviewed. This book is number 17 in this successful series of Analog Circuit Design.

Download or read book Theory of CMOS Digital Circuits and Circuit Failures written by Masakazu Shoji and published by Princeton University Press. This book was released on 2014-07-14 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS chips are becoming increasingly important in computer circuitry. They have been widely used during the past decade, and they will continue to grow in popularity in those application areas that demand high performance. Challenging the prevailing opinion that circuit simulation can reveal all problems in CMOS circuits, Masakazu Shoji maintains that simulation cannot completely remove the often costly errors that occur in circuit design. To address the failure modes of these circuits more fully, he presents a new approach to CMOS circuit design based on his systematizing of circuit design error and his unique theory of CMOS digital circuit operation. In analyzing CMOS digital circuits, the author focuses not on effects originating from the characteristics of the device (MOSFET) but on those arising from their connection. This emphasis allows him to formulate a powerful but ultimately simple theory explaining the effects of connectivity by using a concept of the states of the circuits, called microstates. Shoji introduces microstate sequence diagrams that describe the state changes (or the circuit connectivity changes), and he uses his microstate theory to analyze many of the conventional CMOS digital circuits. These analyses are practically all in closed-form, and they provide easy physical interpretation of the circuit's working mechanisms, the parametric dependence of performance, and the circuit's failure modes. Originally published in 1992. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.

Download or read book High Speed CMOS Circuits for Optical Receivers written by Jafar Savoj and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the exponential growth of the number of Internet nodes, the volume of the data transported on the backbone has increased with the same trend. The load of the global Internet backbone will soon increase to tens of terabits per second. This indicates that the backbone bandwidth requirements will increase by a factor of 50 to 100 every seven years. Transportation of such high volumes of data requires suitable media with low loss and high bandwidth. Among the available transmission media, optical fibers achieve the best performance in terms of loss and bandwidth. High-speed data can be transported over hundreds of kilometers of single-mode fiber without significant loss in signal integrity. These fibers progressively benefit from reduction of cost and improvement of perf- mance. Meanwhile, the electronic interfaces used in an optical network are not capable of exploiting the ultimate bandwidth of the fiber, limiting the throughput of the network. Different solutions at both the system and the circuit levels have been proposed to increase the data rate of the backbone. System-level solutions are based on the utilization of wave-division multiplexing (WDM), using different colors of light to transmit s- eral sequences simultaneously. In parallel with that, a great deal of effort has been put into increasing the operating rate of the electronic transceivers using highly-developed fabrication processes and novel c- cuit techniques.

Download or read book CMOS Continuous Time Adaptive Equalizers for High Speed Serial Links written by Cecilia Gimeno Gasca and published by Springer. This book was released on 2014-09-22 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the design of adaptive equalization solutions integrated in standard CMOS technology for high-speed serial links. Since continuous-time equalizers offer various advantages as an alternative to discrete-time equalizers at multi-gigabit rates, this book provides a detailed description of continuous-time adaptive equalizers design - both at transistor and system levels-, their main characteristics and performances. The authors begin with a complete review and analysis of the state of the art of equalizers for wireline applications, describing why they are necessary, their types, and their main applications. Next, theoretical fundamentals of continuous-time adaptive equalizers are explored. Then, new structures are proposed to implement the different building blocks of the adaptive equalizer: line equalizer, loop-filters, power comparator, etc. The authors demonstrate the design of a complete low-power, low-voltage, high-speed, continuous-time adaptive equalizer. Finally, a cost-effective CMOS receiver which includes the proposed continuous-time adaptive equalizer is designed for 1.25 Gb/s optical communications through 50-m length, 1-mm diameter plastic optical fiber (POF).

Download or read book CMOS Analog Integrated Circuits written by Tertulien Ndjountche and published by CRC Press. This book was released on 2017-12-19 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-speed, power-efficient analog integrated circuits can be used as standalone devices or to interface modern digital signal processors and micro-controllers in various applications, including multimedia, communication, instrumentation, and control systems. New architectures and low device geometry of complementary metaloxidesemiconductor (CMOS) technologies have accelerated the movement toward system on a chip design, which merges analog circuits with digital, and radio-frequency components. CMOS: Analog Integrated Circuits: High-Speed and Power-Efficient Design describes the important trends in designing these analog circuits and provides a complete, in-depth examination of design techniques and circuit architectures, emphasizing practical aspects of integrated circuit implementation. Focusing on designing and verifying analog integrated circuits, the author reviews design techniques for more complex components such as amplifiers, comparators, and multipliers. The book details all aspects, from specification to the final chip, of the development and implementation process of filters, analog-to-digital converters (ADCs), digital-to-analog converters (DACs), phase-locked loops (PLLs), and delay-locked loops (DLLs). It also describes different equivalent transistor models, design and fabrication considerations for high-density integrated circuits in deep-submicrometer process, circuit structures for the design of current mirrors and voltage references, topologies of suitable amplifiers, continuous-time and switched-capacitor circuits, modulator architectures, and approaches to improve linearity of Nyquist converters. The text addresses the architectures and performance limitation issues affecting circuit operation and provides conceptual and practical solutions to problems that can arise in the design process. This reference provides balanced coverage of theoretical and practical issues that will allow the reader to design CMOS analog integrated circuits with improved electrical performance. The chapters contain easy-to-follow mathematical derivations of all equations and formulas, graphical plots, and open-ended design problems to help determine most suitable architecture for a given set of performance specifications. This comprehensive and illustrative text for the design and analysis of CMOS analog integrated circuits serves as a valuable resource for analog circuit designers and graduate students in electrical engineering.

Download or read book Jitter Noise and Signal Integrity at High Speed written by Mike Peng Li and published by Pearson Education. This book was released on 2007-11-19 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art JNB and SI Problem-Solving: Theory, Analysis, Methods, and Applications Jitter, noise, and bit error (JNB) and signal integrity (SI) have become today‘s greatest challenges in high-speed digital design. Now, there’s a comprehensive and up-to-date guide to overcoming these challenges, direct from Dr. Mike Peng Li, cochair of the PCI Express jitter standard committee. One of the field’s most respected experts, Li has brought together the latest theory, analysis, methods, and practical applications, demonstrating how to solve difficult JNB and SI problems in both link components and complete systems. Li introduces the fundamental terminology, definitions, and concepts associated with JNB and SI, as well as their sources and root causes. He guides readers from basic math, statistics, circuit and system models all the way through final applications. Emphasizing clock and serial data communications applications, he covers JNB and SI simulation, modeling, diagnostics, debugging, compliance testing, and much more.

Download or read book High speed Integrated Circuit Technology written by Mark J. W. Rodwell and published by World Scientific. This book was released on 2001 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the state of the art of very high speed digital integrated circuits. Commercial applications are in fiber optic transmission systems operating at 10, 40, and 100 Gb/s, while the military application is ADCs and DACs for microwave radar. The book contains detailed descriptions of the design, fabrication, and performance of wideband Si/SiGe-, GaAs-, and InP-based bipolar transistors. The analysis, design, and performance of high speed CMOS, silicon bipolar, and III-V digital ICs are presented in detail, with emphasis on application in optical fiber transmission and mixed signal ICs. The underlying physics and circuit design of rapid single flux quantum (RSFQ) superconducting logic circuits are reviewed, and there is extensive coverage of recent integrated circuit results in this technology.

Download or read book Optoelectronics for Data Communication written by Ronald C. Lasky and published by Elsevier. This book was released on 1995-10-23 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of optoelectronics for data communication is becoming increasingly important in the 1990s. Much of the base technology needed for this field was developed by the telecommunications industry, but there are important differences which are covered in this text. This is the first book to focus on the critical technology and application issues that are necessary to understand the optoelectronics for data communication industry, which is expected to grow exponentially during the coming years. Optoelectronics for Data Communication is an excellent reference for both researchers and engineers because it emphasizes fundamentals rather than more easily dated topics. The book focuses particular attention on practical engineering issues, making it invaluable to those who have worked or studied in the field of optoelectronics for telecommunication and are now moving to optoelectronics for data communication. - Focuses on fundamentals of the field - Reviews critical technologies and applications - Explains important technology compatibility issues - Includes chapters written by specialists in each area with emphasis on engineering issues and practical aspects - Presents coverage of topics that are unique to optical data communications

Download or read book Analog and Digital Circuits for Electronic Control System Applications written by Jerry Luecke and published by Elsevier. This book was released on 2004-10-15 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's control system designers face an ever-increasing "need for speed and accuracy in their system measurements and computations. New design approaches using microcontrollers and DSP are emerging, and designers must understand these new approaches, the tools available, and how best to apply them.This practical text covers the latest techniques in microcontroller-based control system design, making use of the popular MSP430 microcontroller from Texas Instruments.The book covers all the circuits of the system, including:·Sensors and their output signals·Design and application of signal conditioning circuits·A-to-D and D-to-A circuit design·Operation and application of the powerful and popular TI MSP430 microcontroller·Data transmission circuits·System power control circuitryWritten by an experienced microcontroller engineer and textbook author, the book is lavishly illustrated and includes numerous specific circuit design examples, including a fully tested and documented hands-on project using the MSP430 that makes use of the principles described. For students, engineers, technicians, and hobbyists, this practical text provides the answers you need to design modern control systems quickly and easily. - Seasoned Texas Instruments designer provides a ground-up perspective on embedded control systems - Pedagogical style provides a self-learning approach with examples, quizzes and review features

Download or read book Coupled Data Communication Techniques for High Performance and Low Power Computing written by Ron Ho and published by Springer Science & Business Media. This book was released on 2010-06-03 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wafer-scale integration has long been the dream of system designers. Instead of chopping a wafer into a few hundred or a few thousand chips, one would just connect the circuits on the entire wafer. What an enormous capability wafer-scale integration would offer: all those millions of circuits connected by high-speed on-chip wires. Unfortunately, the best known optical systems can provide suitably ?ne resolution only over an area much smaller than a whole wafer. There is no known way to pattern a whole wafer with transistors and wires small enough for modern circuits. Statistical defects present a ?rmer barrier to wafer-scale integration. Flaws appear regularly in integrated circuits; the larger the circuit area, the more probable there is a ?aw. If such ?aws were the result only of dust one might reduce their numbers, but ?aws are also the inevitable result of small scale. Each feature on a modern integrated circuit is carved out by only a small number of photons in the lithographic process. Each transistor gets its electrical properties from only a small number of impurity atoms in its tiny area. Inevitably, the quantized nature of light and the atomic nature of matter produce statistical variations in both the number of photons de?ning each tiny shape and the number of atoms providing the electrical behavior of tiny transistors. No known way exists to eliminate such statistical variation, nor may any be possible.

Download or read book High speed Optical Transceivers Integrated Circuits Designs And Optical Devices Techniques written by Yuyu Liu and published by World Scientific. This book was released on 2006-03-09 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the unique advantages and large inherent transmission capacity of optical fiber communication systems. The long-term and high-risk research challenges of optical transceivers are analyzed with a view to sustaining the seemingly insatiable demand for bandwidth. A broad coverage of topics relating to the design of high-speed optical devices and integrated circuits, oriented to low power, low cost, and small area, is discussed.Written by specialists with many years of research and engineering experience in the field of optical fiber communication, this book is essential for an audience dedicated to the development of integrated electronic systems for optical communication applications. It can also be used as a supplementary text for graduate courses on optical transceiver IC design.