Download or read book Close range 3D thermography real time reconstruction of high fidelity 3D thermograms written by Antonio Rafael Ordóñez Müller and published by kassel university press GmbH. This book was released on 2019-01-21 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared thermography enables the non-contact measurement of an object’s surface temperature and presents the results in form of thermal images. The analysis of these images provides valuable information about an object’s thermal state. However, the fidelity of the thermal images strongly depends on the pose of the thermographic camera with respect to the surface. 3D thermography offers the possibility to overcome this and other limitations that affect conventional 2D thermography but most 3D thermographic systems developed so far generate 3D thermograms from a single perspective or from few noncontiguous points of view and do not operate in real time. As a result, the 3D thermograms they generate do not offer much advantage over conventional thermal images. However, recent technological advances have unlocked the possibility of implementing affordable handheld 3D thermal imaging systems that can be easily maneuvered around an object and that can generate high-fidelity 3D thermograms in real time. This thesis explores various aspects involved in the real-time generation of high-fidelity 3D thermograms at close range using a handheld 3D thermal imaging system, presents the results of scanning an operating industrial furnace and discusses the problems associated with the generation of 3D thermograms of large objects with complex geometries.
Download or read book Close Range 3D Thermography Real time Reconstruction of High Fidelity 3D Thermograms written by Antonio Rafael Ordóñez Müller and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On the Detection and Selection of Informative Subsequences from Large Historical Data Records for Linear System Identification written by David Leonardo Arengas Rojas and published by BoD – Books on Demand. This book was released on 2022-01-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performing experiments for system identification of continuously operated plants might be restricted as it can impact negatively normal production. In such cases, using historical logged data can become an attractive alternative for system identification. However, operating points are rarely changed and parameter estimation methods can suffer numerical problems. Three main drawbacks of current approaches in this research area can be discussed. Firstly, detection tests are not adapted for dynamical systems. Secondly, methods to define upper interval bounds are not robust to colored noise that is more likely to be found in real applications. Thirdly, model estimation with the retrieved data is not supported and the performance of the method cannot be assessed. In the method proposed in this work, called data selection for system identification (DS4SID), previous drawbacks are addressed and robust tests are designed and implemented. The performance of DS4SID is evaluated in a simulated and laboratory multivariate processes. A process unit of the lab-scale factory “μPlant” is used as industryoriented case study. Models estimated with selected data are shown to have similar performance than estimates with the entire data set.
Download or read book Building Physics and Building Energy Systems written by Davide Astiaso Garcia and published by MDPI. This book was released on 2021-03-19 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy transition is one of the key approaches in the effort to halt climate changes, and it has become even more essential in the light of the recent COVID-19 pandemic. Fostering the energy efficiency and the energy independence of the building sector is a focal aim to move towards a decarbonized society. In this context, building physics and building energy systems are fundamental disciplines based on applied physics applications in civil, architectural, and environmental engineering, including technical themes related to the planning of energy and the environment, diagnostic methods, and mitigating techniques. This Special Issue contains information on experimental studies in the following research topics: renewable energy sources, building energy analysis, rational use of energy, heat transmission, heating and cooling systems, thermofluid dynamics, smart energy systems, and energy service management in buildings.
Download or read book Infrared Thermography written by Waldemar Minkina and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Infrared Thermography, the authors discuss the sources of uncertainty, including how to quantify these sources, associated with the use of thermal imagers. This book explains the common misunderstandings in the interpretation of temperature measurements, and provides a metrological evaluation of commercially available infrared cameras. It suggests how to best estimate the accuracy of thermal imaging instruments, whilst considering the level of accuracy attributed to measurements from these thermal imagers. Key features: Begins with an introduction to uncertainties and radiance terms before moving onto the issues surrounding thermal imaging. Deals with the basic issues of thermal imager measurements such as the law of heat exchange by radiation and emissivity. Describes a typical processing algorithm of the measurement path for an example infrared camera. Discusses measurement error analysis of a thermal imaging system. Considers the results of simulation research of thermography uncertainty. Includes an accompanying website which hosts MATLAB® code. Infrared Thermography is primarily aimed at quantitative thermographers, and manufacturers, vendors and users of thermal imagers. This book is also of interest to senior undergraduate and postgraduate students across a range of disciplines such as electrical, mechanical and civil engineering, computer science, and biomedicine.
Download or read book Infrared Thermography written by Raghu Prakash and published by BoD – Books on Demand. This book was released on 2012-03-14 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared Thermography (IRT) is commonly as a NDE tool to identify damages and provide remedial action. The fields of application are vast, such as, materials science, life sciences and applied engineering. This book offers a collection of ten chapters with three major sections - relating to application of infrared thermography to study problems in materials science, agriculture, veterinary and sports fields as well as in engineering applications. Both mathematical modeling and experimental aspects of IRT are evenly discussed in this book. It is our sincere hope that the book meets the requirements of researchers in the domain and inspires more researchers to study IRT.
Download or read book Digital Image Processing for Medical Applications written by Geoff Dougherty and published by Cambridge University Press. This book was released on 2009 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hands-on text for a first course aimed at end-users, focusing on concepts, practical issues and problem solving.
Download or read book Spinoff 2012 written by Daniel Coleman and published by Government Printing Office. This book was released on 2013-02-06 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: NP 2012-11-912-HQ. Provides an in-depth look at how NASA's initiatives in aeronautics and space exploration have resulted in beneficial commercial technologies in the fields of health and medicine, transportation, public safety, consumer goods, environmental protection, computer technology and industrial productivity
Download or read book Non Destructive Evaluation NDE of Polymer Matrix Composites written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2013-06-30 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased use of polymer matrix composites in structural applications has led to the growing need for a very high level of quality control and testing of products to ensure and monitor performance over time. Non-destructive evaluation (NDE) of polymer matrix composites explores a range of NDE techniques and the use of these techniques in a variety of application areas. Part one provides an overview of a range of NDE and NDT techniques including eddy current testing, shearography, ultrasonics, acoustic emission, and dielectrics. Part two highlights the use of NDE techniques for adhesively bonded applications. Part three focuses on NDE techniques for aerospace applications including the evaluation of aerospace composites for impact damage and flaw characterisation. Finally, the use of traditional and emerging NDE techniques in civil and marine applications is explored in part four. With its distinguished editor and international team of expert contributors, Non-destructive evaluation (NDE) of polymer matrix composites is a technical resource for researchers and engineers using polymer matrix composites, professionals requiring an understanding of non-destructive evaluation techniques, and academics interested in this field. Explores a range of NDE and NDT techniques and considers future trends Examines in detail NDE techniques for adhesively bonded applications Discusses NDE techniques in aerospace applications including detecting impact damage, ultrasonic techniques and structural health monitoring
Download or read book Trends in Optical Non Destructive Testing and Inspection written by P.K. Rastogi and published by . This book was released on 2000 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of measurement techniques broadly referred to as Optical Metrology, with emphasis on their applications to nondestructive testing. If we look separately at each of the two terms making the generic name Optical Metrology, we find a link to two of the most distinctive aspects of humans: a particularly well developed sense of vision and a desire to classify things using numbers and rules. Of all our five senses, vision is certainly the most developed and the closest to the rational part of our brain. It can be argued that our memory is strongly dependent on images and the brain is particularly good at processing the stimuli received from these images to extract information. Measuring, sizing and counting are, on the other hand, among the fundamental building blocks of modern society. The use of abstract quantities like size, value or intensity has simplified the description of complex enquiry and is the basis of modern science and economy. Hence, it would seem natural that the combination of two such basic aspects should result in the birth of a new field of science. However, it is known that his has not been the case. Optical Metrology remains classified as a group of special techniques used mainly in niche applications. Optical Metrology may be rightly described as an ensemble of techniques in which fields such as physics, electrical and mechanical engineering, and computer science merge and blend in new ways. This book is intended as a tribute to the career of Professor Léopold Pflug. By looking back at his lifelong commitment to the application of optical metrology to the service of engineering sciences, more particularly devoted to the observation of the real behavior of structural components, one can retrace the major revolutions that have taken place in this domain. Starting his activity in 1971 as the head of the Laboratory for Stress Analysis at the EPFL in Switzerland, he first employed photoelasticity as a tool to improve the understanding of the real behavior of complex structures. However he soon recognized the necessity of working with the real materials used to build these structures instead of on replicas made of optically birefringent materials. He then focussed on the use of moiré techniques which sparked his fascination with laser-based holography and speckle-based methods. The advent of information technology led him to open up to the use of ESPI and digital image processing techniques. Finally, in the mid 1990s he became interested in the use of optical fibers as a tool for sensing deformations inside structures, not only on their surfaces as in the case of whole-field methods. It is interesting to note the parallel in the evolution of optical metrology vis à vis developments in other fields: the development of lasers led to holographic interferometry, the availability of frame-grabbers led to ESPI and the emergence of fiber optic communications opened the way to the development of fiber optic sensors. This puts in sharp perspective the strong dependence of optical metrology on the latest technology for its development. Also interesting to note is that all fields in optical metrology touched upon by Professor Pflug are still of great relevance, as shown by the contributions in this volume. This book is, however, not intended as a commemoration, rather as an occasion to review the trends and undercurrents that are driving the field of optical metrology, with emphasis on nondestructive testing. All the authors were asked to summarize the recent achievements in their respective fields and to speculate about the future. As a result it has become apparent that it is difficult although not impossible to spot general trends in these disparate fields. Optical metrology has considerably benefited from some of the most important innovations of the recent past: lasers, computers and fiber optics communication, all of which found their direct inspiration from the developments in the world of electronics. In recent years we have also witnessed a shift of power from states to corporations. This has created the need to produce quick results useful to industry. Optical nondestructive testing has certainly adapted to this evolution, and several contributions in this book show that the researchers in this field understand the importance of developing technology that can be used by the industry to solve specific problems. We should also not forget that optical nondestructive testing is essentially a "service technology" and should as such not only focus on serving its clients in the best possible way, but also should continually emphasize, extend and enhance its services to new users still unaware of its potential. Hopefully this book will help in spreading awareness of the potentials of optical metrology and in focusing on the challenges of the future.
Download or read book The Restoration of Engravings Drawings Books and Other Works on Paper written by Max Schweidler and published by Getty Publications. This book was released on 2006 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since its original publication in Germany in 1938, Max Schweidler's Die Instandetzung von Kupferstichen, Zeichnungen, Buchern usw has been recognized as a seminal modern text on the conservation and restoration of works on paper. To address what he saw as a woeful dearth of relevant literature and in order to assist those who have 'set themselves the goal of preserving cultural treasures, ' the noted German restorer composed a thorough technical manual covering a wide range of specific techniques, including detailed instructions on how to execute structural repairs and alterations that, if skilfully done, can be virtually undetectable. By the mid-twentieth century, curators and conservators of graphic arts, discovering a nearly invisible repair in an old master print or drawing, might comment that the object had been 'Schweidlerized.' This volume, based on the authoritative revised German edition of 1949, makes Schweidler's work available in English for the first time, in a meticulously edited and annotated critical edition. The editor's introduction places the work in its historical context and probes the philosophical issues the book raises, while some two hundred annotati
Download or read book Medical Infrared Imaging written by Mary Diakides and published by CRC Press. This book was released on 2012-12-12 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of technological advances in infrared sensor technology, image processing, "smart" algorithms, knowledge-based databases, and their overall system integration has resulted in new methods of research and use in medical infrared imaging. The development of infrared cameras with focal plane arrays no longer requiring cooling, added a new dimension to this modality. Medical Infrared Imaging: Principles and Practices covers new ideas, concepts, and technologies along with historical background and clinical applications. The book begins by exploring worldwide advances in the medical applications of thermal imaging systems. It covers technology and hardware including detectors, detector materials, un-cooled focal plane arrays, high performance systems, camera characterization, electronics for on-chip image processing, optics, and cost-reduction designs. It then discusses the physiological basis of the thermal signature and its interpretation in a medical setting. The book also covers novel and emerging techniques, the complexities and importance of protocols for effective and reproducible results, storage and retrieval of thermal images, and ethical obligations. Of interest to both the medical and biomedical engineering communities, the book explores many opportunities for developing and conducting multidisciplinary research in many areas of medical infrared imaging. These range from clinical quantification to intelligent image processing for enhancement of the interpretation of images, and for further development of user-friendly high-resolution thermal cameras. These would enable the wide use of infrared imaging as a viable, noninvasive, low-cost, first-line detection modality.
Download or read book Infrared Thermography Recent Advances and Future Trends written by Carosena Meola and published by Bentham Science Publishers. This book was released on 2012-08-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared thermography (IRT) is a non-contact, non-invasive methodology which allows for detection of thermal energy that is radiated from objects in the infrared band of the electromagnetic spectrum, for conversion of such energy into a visible image (such as a surface temperature map). This feature represents a great potential to be exploited in a vast variety of fields from aerospace to civil engineering, to medicine, to agriculture, etc. However, IRT is still not adequately enclosed in industrial instrumentation and there are still potential users who might benefit from the use of such a technique and who are not aware of their existence. This e-book conveys information about basic IRT theory, infrared detectors, signal digitalization and applications of infrared thermography in many fields such as medicine, foodstuff conservation, fluid-dynamics, architecture, anthropology, condition monitoring, non destructive testing and evaluation of materials and structures. The volume promotes an exchange of information between the academic world and industry, and shares methodologies which were independently developed and applied in specific disciplines.
Download or read book Advances in Airborne Lidar Systems and Data Processing written by and published by . This book was released on 2018-05-11 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects the papers in the special issue "Airborne Laser Scanning" in Remote Sensing (Nov. 2016) and several other selected papers published in the same journal in the past few years. Our intention is to reflect recent technological developments and innovative techniques in this field. The book consists of 23 papers in six subject areas: 1) Single photon and Geiger-mode Lidar, 2) Multispectral lidar, 3) Waveform lidar, 4) Registration of point clouds, 5) Trees and terrain, and 6) Building extraction. The book is a valuable resource for scientists, engineers, developers, instructors, and graduate students interested in lidar systems and data processing.
Download or read book Handbook of Technical Diagnostics written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and railway systems. And finally, Part E is an excursion on diagnostics in arts and culture. The book integrates knowledge of basic sciences and engineering disciplines with contributions from research institutions, academe, and industry, written by internationally known experts from various parts of the world, including Europe, Canada, India, Japan, and USA.
Download or read book Human Systems Engineering and Design III written by Waldemar Karwowski and published by Springer Nature. This book was released on 2020-08-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on novel design and systems engineering approaches, including theories and best practices, for promoting a better integration of people and engineering systems. It covers a range of innovative topics related to: development of human-centered systems; interface design and human-computer interaction; usability and user experience; innovative materials in design and manufacturing; biomechanics and physical rehabilitation, as well as safety engineering and systems complexity. The book, which gathers selected papers presented at the 3rd International Conference on Human Systems Engineering and Design: Future Trends and Applications (IHSED 2020), held on September 22-24, 2020, at Juraj Dobrila University of Pula, in Pula, Croatia, provides researchers and practitioners with a snapshot of the state-of-the-art and current challenges in the field of human systems engineering and design.
Download or read book Deep Learning and Data Labeling for Medical Applications written by Gustavo Carneiro and published by Springer. This book was released on 2016-10-07 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of two workshops held at the 19th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2016, in Athens, Greece, in October 2016: the First Workshop on Large-Scale Annotation of Biomedical Data and Expert Label Synthesis, LABELS 2016, and the Second International Workshop on Deep Learning in Medical Image Analysis, DLMIA 2016. The 28 revised regular papers presented in this book were carefully reviewed and selected from a total of 52 submissions. The 7 papers selected for LABELS deal with topics from the following fields: crowd-sourcing methods; active learning; transfer learning; semi-supervised learning; and modeling of label uncertainty.The 21 papers selected for DLMIA span a wide range of topics such as image description; medical imaging-based diagnosis; medical signal-based diagnosis; medical image reconstruction and model selection using deep learning techniques; meta-heuristic techniques for fine-tuning parameter in deep learning-based architectures; and applications based on deep learning techniques.