Download or read book Clinical Application of 3D Printing in Foot Ankle Surgery E Book written by Peter D. Highlander and published by Elsevier Health Sciences. This book was released on 2023-01-05 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an emerging technology, 3D printing holds much promise for foot and ankle reconstruction and difficult-to-treat pathologies. The first text of its kind, Clinical Application of 3D Printing in Foot and Ankle Surgery provides comprehensive, in-depth operative coverage as well as opinions and case examples from surgeons who are currently using 3D printing in their practices. This ground-breaking volume sets the standard for this rapidly advancing field and provides practical, real-world guidance on incorporating 3D printing into your surgical practice. Presents clinically focused content in a templated, easy-to-read format of bulleted summaries and practical advice based on the editor’s and authors’ experience. Features a practical focus on procedures, techniques, and cases, with tips, tricks, and pearls throughout. Includes decision-making criteria on when to consider 3D printing. Provides preoperative, intraoperative, and postoperative protocols developed by the authors. Contains high-quality photographs and 3D imaging.
Download or read book Clinical Applications of 3D Printing in Foot and Ankle Surgery written by Peter D. Highlander and published by Elsevier. This book was released on 2023-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an emerging technology, 3D printing holds much promise for foot and ankle reconstruction and difficult-to-treat pathologies. The first text of its kind, Clinical Application of 3D Printing in Foot and Ankle Surgery provides comprehensive, in-depth operative coverage as well as opinions and case examples from surgeons who are currently using 3D printing in their practices. This ground-breaking volume sets the standard for this rapidly advancing field and provides practical, real-world guidance on incorporating 3D printing into your surgical practice. Presents clinically focused content in a templated, easy-to-read format of bulleted summaries and practical advice based on the editor's and authors' experience. Features a practical focus on procedures, techniques, and cases, with tips, tricks, and pearls throughout. Includes decision-making criteria on when to consider 3D printing. Provides preoperative, intraoperative, and postoperative protocols developed by the authors. Contains high-quality photographs and 3D imaging. An eBook version is included with purchase. The eBook allows you to access all of the text, figures and references, with the ability to search, customize your content, make notes and highlights, and have content read aloud.
Download or read book 3D Printing Application in Medical Surgery E Book written by Georgios Tsoulfas and published by Elsevier Health Sciences. This book was released on 2019-11-28 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances and technologies in 3D printing have improved and expanded applications for surgery, biomedical engineering, and nanotechnology. In this concise new title, Drs. Georgios Tsoulfas, Petros I. Bangeas, and Jasjit S. Suri synthesize state-of-the-art information on 3D printing and provide guidance on the optimal application in today’s surgical practice, from evaluation of the technology to virtual reality and future opportunities. Discusses challenges, opportunities, and limitations of 3D printing in the field of surgery. Covers patient and surgical education, ethics and intellectual property, quality and safety, 3D printing as it relates to nanotechnology, tissue engineering, virtual augmented reality, and more. Consolidates today’s available information on this burgeoning topic into a single convenient resource.
Download or read book 3D Printing in Orthopaedic Surgery written by Matthew Dipaola and published by Elsevier Health Sciences. This book was released on 2018-11-20 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get a quick, expert overview of the role of emerging 3D printing technology in orthopaedic surgery, devices, and implants. This concise resource by Drs. Matthew DiPaola and Felasfa Wodajo provides orthopaedic surgeons and residents with need-to-know information on the clinical applications of 3D printing, including current technological capabilities, guidance for practice, and future outlooks for this fast-growing area. Covers basic principles such as engineering aspects, software, economics, legal considerations, and applications for education and surgery planning. Discusses 3D printing in arthroplasty, trauma and deformity, the adult and pediatric spine, oncology, and more. Includes information on setting up a home 3D printing "plant" and 3D printing biologics. Consolidates today’s available information on this burgeoning topic into a single convenient resource
Download or read book 3D Printing Application in Medical Surgery Volume 2 E Book written by Jasjit S. Suri and published by Elsevier Health Sciences. This book was released on 2021-09-05 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies in 3D printing offer innovative capabilities in surgery, from planning complex operations to providing alternatives to traditional training with more cost-effective outcomes. In 3D Printing: Application in Medical Surgery, Volume 2, Drs. Vasileios N. Papadopoulos, Vassilios Tsioukas, and Jasjit S. Suri bring together up-to-date information on 3D printing and its application in surgical specialties such as hebatobilliary and pancreatic surgery, vascular surgery, orthopedic surgery, obstetrics and gynecology, cardiovascular and thoracic surgery, and more. Discusses challenges and opportunities of 3D printing in the field of surgery. Covers 3D printing and its application in major surgical subspecialties, as well as dentistry, transplantation, global surgery, and diagnostic and interventional radiology. Consolidates today’s available information on this burgeoning topic into a single convenient resource.
Download or read book 3D Printing in Podiatric Medicine written by Kamalpreet Sandhu and published by Academic Press. This book was released on 2022-11-15 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Podiatric Medicine compiles an interdisciplinary range of scientific literature, laboratory developments, industrial implications and futuristic avenues in this field. The book provides recent developments and research breakthroughs in 3D printing in podiatric medicine, such as functionalized feedstock systems, smart products, process characteristics, modeling and optimization of printed systems and products, and industrial applications. It covers best practices for 3D printing methods to capture, document and validate challenges at the early stage of the design process. The book's content then goes into mitigating design strategies to address these challenges without compromising the cost, safety and quality of the device. This book supports new and emerging specializations and provides a comprehensive collection of technical notes, research designs, design methods and processes and case studies. Includes coverage of the biomechanical behavior of feet, injuries and injury prevention using 3D printed customized orthosis Uses an amalgamation of CAD/CAM, reverse engineering and artificial intelligence with 3D printing in podiatric medicine Investigates plantar pressure using gait measurement technologies
Download or read book 3D Printing in Medicine written by Frank J. Rybicki and published by Springer. This book was released on 2017-09-27 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal, craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines are addressed, and the overall costs of a 3D printing lab and the balancing of these costs against clinical benefits are discussed. Radiologists, surgeons, and other physicians will find this book to be a rich source of information on the practicalities and expanding medical applications of 3D printing.
Download or read book 3D Printing in Medicine and Surgery written by Daniel J. Thomas and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine and Surgery: Applications in Healthcare is an advanced book on surgical and enhanced medical applications that can be achieved with 3D printing. It is an essential handbook for medical practitioners, giving access to a range of practical methods, while also focusing on applied knowledge. This comprehensive resource features practical experiments and processes for preparing 3D printable materials. Early chapters cover foundational knowledge and background reading, while later chapters discuss and review the current technologies used to engineer specific tissue types, experiments and methods, medical approaches and the challenges that lie ahead for future research. The book is an indispensable reference guide to the various methods used by current medical practitioners working at the forefront of 3D printing applications in medicine. Provides a detailed introduction and narrative on how 3-D printing can be used towards developing future medicine-based therapies Covers up-to-date methods across a range of application areas for the first time in book form Presents the only book on all current areas of 3D printing in medicine that is catered to a medical rather than engineering audience
Download or read book 3D Printing for the Radiologist E Book written by Nicole Wake and published by Elsevier Health Sciences. This book was released on 2021-05-27 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, yet concise, 3D Printing for the Radiologist presents an overview of three-dimensional printing at the point of care. Focusing on opportunities and challenges in radiology practice, this up-to-date reference covers computer-aided design principles, quality assurance, training, and guidance for integrating 3D printing across radiology subspecialties. Practicing and trainee radiologists, surgeons, researchers, and imaging specialists will find this an indispensable resource for furthering their understanding of the current state and future outlooks for 3D printing in clinical medicine. Covers a wide range of topics, including basic principles of 3D printing, quality assurance, regulatory perspectives, and practical implementation in medical training and practice. Addresses the challenges associated with 3D printing integration in clinical settings, such as reimbursement, regulatory issues, and training. Features concise chapters from a team of multidisciplinary chapter authors, including practicing radiologists, researchers, and engineers. Consolidates today’s available information on this timely topic into a single, convenient, resource.
Download or read book Handbook of Surgical Planning and 3D Printing written by Paolo Gargiulo and published by Elsevier. This book was released on 2023-03-23 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Surgical Planning and 3D Printing: Applications, Integration, and New Directions?covers 3D printing and surgical planning from clinical, technical and economic points-of-view. This book fills knowledge gaps by addressing: (1) What type of medical images are needed for 3D printing, and for which specific application? (2) What software should be used to process the images, should the software be considered a medical device? (3) Data protection? (4) What are the possible clinical applications and differences in imaging, segmentation, and 3D printing? And finally, (5) What skills, resources, and organization are needed? Sections cover technologies involved in 3D printing in health: data structure, medical images and segmentation, printing materials and 3d printing, 3D printing and Clinical Applications: orthopedic surgery, neurosurgery, maxillofacial, orthodontistry, surgical guides, integrating 3D printing Service in Hospitals: infrastructures, competences, organization and cost/benefits, and more. Provides a unique insight into a technological process and its applications Heps readers find answers to practical and technical questions concerning 3D printing and surgical planning Presents deep insights into new directions of 3D printing in healthcare and related emerging applications such as bioprinting, biocompatible materials and metal printing for custom-made prosthetic design
Download or read book Innovations in Foot and Ankle Surgery An Issue of Clinics in Podiatric Medicine and Surgery E Book written by Guido A Laporta and published by Elsevier Health Sciences. This book was released on 2018-09-19 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of Clinics in Podiatric Medicine and Surgery, guest edited by Dr. Guido LaPorta, will discuss several important, recent Innovations in Foot and Ankle Surgery. Topics covered include: The Subchondroplasty (SCP) Procedure for Chronic Bone Lesions, Sonic Pin & Sonic Anchor, Total Talus Replacement, Minimally Invasive Bunion Correction, Trabecular Metal Wedges and Custom 3D Printed Implants, Fundamentals and Classification of Hexapod Surgery, Biomechanical Considerations for Circular External Fixation, Essentials of Deformity Planning, Gradual Equinus Correction, Midfoot Charcot Reconstruction, and Complex Deformity Correction, among others.
Download or read book 3D Printing in Bone Surgery written by Carmine Zoccali and published by Springer Nature. This book was released on 2022-03-05 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature, this is the first book to comprehensively discuss 3D printing applied to bone surgery. It provides both the scientific basics and practical applications, with a special focus on 3D-printed, custom-made titanium prostheses (3DPCMP) used for bone reconstruction following tumor resection. Initially applied to pelvic and scapular prostheses – because of their of highly complex anatomy – this technology is increasingly being adopted in other fields of orthopedics, such as limb surgery, traumatology and degenerative diseases. Throughout the book, experts from various fields share their knowledge, describing 3D printing applied to the reconstruction of different bone segments, reviewing each application and comparing it with traditional reconstruction. They also present real-world case studies from their clinical practice. Uniquely responding to the growing interest surrounding 3D printing for bone reconstruction, this book is invaluable for orthopedic, neuro- , head and neck as well as maxillofacial surgeons wishing to gain insights into this new and promising field.
Download or read book Applied Translational Research in Foot and Ankle Surgery An issue of Foot and Ankle Clinics of North America E Book written by Don Anderson and published by Elsevier Health Sciences. This book was released on 2023-02-24 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this issue of Foot and Ankle Clinics, guest editor Dr. Don Anderson brings his considerable expertise to the topic of Applied Translational Research in Foot and Ankle Surgery. Applied translational research is designed to ensure the highest possible chance of success, and in this issue, top experts in foot and ankle surgery help you produce more meaningful, applicable results that take both safety and efficacy into consideration. Contains 14 practice-oriented topics including utilizing novel in-clinic assessments to identify aberrant foot biomechanics; foot and ankle alignment and biomechanical implications; patient-specific FE analysis of foot and ankle biomechanics; biomechanics of chronic ankle instability; and more. Provides in-depth clinical reviews on applied translational research in foot and ankle surgery, offering actionable insights for clinical practice. Presents the latest information on this timely, focused topic under the leadership of experienced editors in the field. Authors synthesize and distill the latest research and practice guidelines to create clinically significant, topic-based reviews.
Download or read book 3D Printing in Medicine written by Deepak M. Kalaskar and published by Woodhead Publishing. This book was released on 2022-10-18 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine, Second Edition examines the rapidly growing market of 3D-printed biomaterials and their clinical applications. With a particular focus on both commercial and premarket tools, the book looks at their applications within medicine and the future outlook for the field. The chapters are written by field experts actively engaged in educational and research activities at the top universities in the world. The earlier chapters cover the fundamentals of 3D printing, including topics such as materials and hardware. The later chapters go on to cover innovative applications within medicine such as computational analysis of 3D printed constructs, personalized 3D printing - including 3D cell and organ printing and the role of AI - with a subsequent look at the applications of high-resolution printing, 3D printing in diagnostics, drug development, 4D printing, and much more. This updated new edition features completely revised content, with additional new chapters covering organs-on-chips, bioprinting regulations and standards, intellectual properties, and socio-ethical implications of organs-on-demand. Reviews a broad range of biomedical applications of 3D printing biomaterials and technologies Provides an interdisciplinary look at 3D printing in medicine, bridging the gap between engineering and clinical fields Includes completely updated content with additional new chapters, covering topics such as organs-on-chips, bioprinting regulations, intellectual properties, medical standards in 3D printing, and more
Download or read book McGlamry s Comprehensive Textbook of Foot and Ankle Surgery written by The Podiatry Institute and published by Lippincott Williams & Wilkins. This book was released on 2012-10-31 with total page 5382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive text in its field, McGlamry's Comprehensive Textbook of Foot and Ankle Surgery, is the ideal reference for the podiatric or orthopedic surgeon, resident, or student preparing for certification exams. From perioperative management to postoperative complications and considerations, this must-have resource prepares you for a full range of podiatric surgeries and procedures ranging from routine trauma of the foot and leg to compound deformities, enabling you to face any challenge with confidence. This is the tablet version of McGlamry's Comprehensive Textbook of Foot and Ankle Surgery which does not include access to the supplemental content mentioned in the text.
Download or read book Innovative Approaches on Cavovarus Deformity Thinking Outside of the Box An issue of Foot and Ankle Clinics of North America E Book written by Alessio Bernasconi and published by Elsevier Health Sciences. This book was released on 2023-10-20 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this issue of Foot and Ankle Clinics, guest editor Dr. Alessio Bernasconi brings his considerable expertise to the topic of Innovative Approaches on Cavovarus Deformity: Thinking Outside of the Box. The cavovarus foot is a complex deformity, making it important for foot and ankle surgeons to stay up to date on innovative treatment approaches. In this issue, top experts discuss modern advances in the field with the goal of helping surgeons perform complex corrections with a reduced risk of failure and complications. Contains 14 practice-oriented topics including the role of minimally invasive osteotomies in cavovarus foot reconstruction: patient-specific instrumentation; detailed technique and evidence for procedures; cavovarus deformity: why WBCT should be the primary investigation modality; midfoot tarsectomy in cavovarus: why PSI makes a difference; supramalleolar osteotomies in the cavovarus foot: why PSI makes a difference; and more. Provides in-depth clinical reviews on innovative approaches on cavovarus deformity, offering actionable insights for clinical practice. Presents the latest information on this timely, focused topic under the leadership of experienced editors in the field. Authors synthesize and distill the latest research and practice guidelines to create clinically significant, topic-based reviews.
Download or read book Advances in 3D Printing written by Ashutosh Sharma and published by BoD – Books on Demand. This book was released on 2023-05-03 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
