Download or read book The Certified Pharmaceutical GMP Professional Handbook written by Mark Allen Durivage and published by Quality Press. This book was released on 2016-05-23 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this handbook is to assist individuals for the Certified Pharmaceutical Good Manufacturing Practices Professional (CPGP) examination and provide a reference for the practitioner. The second edition reflects the Body of Knowledge which was updated in 2015. This edition has also incorporated additional information including updated references. The updates reflect the current trends and expectations of the evolving pharmaceutical industry driven by consumer expectations and regulatory oversight. This handbook covers compliance with good manufacturing practices (GMPs), as regulated and guided by national and international agencies for the pharmaceutical industry. It covers finished human and veterinary drugs and biologics, and combination devices, as well as their component raw materials (including active pharmaceutical ingredients (APIs) and excipients), and packaging and labeling operations.

Download or read book Handbook of Pharmaceutical Manufacturing Formulations Third Edition written by Sarfaraz K. Niazi and published by CRC Press. This book was released on 2019-12-09 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Pharmaceutical Manufacturing Formulations, Third Edition: Volume Six, Sterile Products is an authoritative and practical guide to the art and science of formulating drugs for commercial manufacturing. With thoroughly revised and expanded content, this sixth volume of a six-volume set, compiles data from FDA and EMA new drug applications, patents and patent applications, and other sources of generic and proprietary formulations including author’s own experience, to cover the broad spectrum of cGMP formulations and issues in using these formulations in a commercial setting. A must-have collection for pharmaceutical manufacturers, educational institutions, and regulatory authorities, this is an excellent platform for drug companies to benchmark their products and for generic companies to formulate drugs coming off patent. Features:  Largest source of authoritative and practical formulations, cGMP compliance guidance and self-audit suggestions  Differs from other publications on formulation science in that it focuses on readily scalable commercial formulations that can be adopted for cGMP manufacturing  Tackles common difficulties in formulating drugs and presents details on stability testing, bioequivalence testing, and full compliance with drug product safety elements  Written by a well-recognized authority on drug and dosage form development including biological drugs and alternative medicines

Download or read book Microbial Limit and Bioburden Tests written by Lucia Clontz and published by CRC Press. This book was released on 2008-10-14 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the field of pharmaceutical microbiology has experienced numerous technological advances, accompanied by the publication of new and harmonized compendial methods. It is therefore imperative for those who are responsible for monitoring the microbial quality of pharmaceutical/biopharmaceutical products to keep abreast of the latest c

Download or read book Healthcare Sterilisation written by Wayne J Rogers and published by Smithers Rapra. This book was released on 2014-06-09 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of topics in the second volume of this book challenges the reader to think beyond standard methods and question why certain current procedures remain static while technological advances abound in other aspects of sterilisation technology. By small means, better practices may come to pass to help answer some of the residual healthcare sterilisation and nosocomial infection queries: What are some of the current challenges in healthcare sterilisation, and how can they be handled? What are some of the acceptable current non-traditional sterilisation methods, challenging alternatives, and novel modalities? What are some of the packaging, validation and statistical considerations of sterilisation practices? How does design-of-product and packaging interrelate with sterilisation processing? Are the current sterility media and practices optimal for recovery of more modified and more resistant viable organism entities and product? Are there increased sterility and product quality needs with new types of implantables and technological advances within the three dimensional combinations of diagnostics, drug release and challenging medical devices?

Download or read book Compounding Sterile Preparations written by E. Clyde Buchanan and published by ASHP. This book was released on 2009-02-01 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Empower your staff to improve safety, quality and compliance with the help of new guidelines and standards. We’ve updated every chapter of this popular review of the fundamentals of preparing sterile products in hospital, home-care, and community pharmacy settings to reflect the most recent revisions to USP . Included are the latest guidelines for the compounding process, quality assurance methods, and comprehensive coverage of all aspects of the dispensing process. Comprehensive documentation for the guidelines is included in the appendices.Chapters new to this edition focus on: Gap analysis and action plans Safe use of automatic compounding devices Cleaning and disinfecting Radiopharmaceuticals as CSPs Allergen extracts as CSPs.

Download or read book The ASQ Certified Pharmaceutical GMP Professional Handbook written by Mark Allen Durivage and published by Quality Press. This book was released on 2024-09-30 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ASQ Certified Pharmaceutical GMP Professional Handbook assists candidates preparing for the Certified Pharmaceutical Good Manufacturing Practices Professional (CPGP) examination and serves as a handy reference guide for practitioners in the field. This handbook covers compliance with good manufacturing practices (GMPs) as regulated and guided by national and international agencies for the pharmaceutical industry.

Download or read book Environmental Monitoring for Cleanrooms and Controlled Environments written by Anne Marie Dixon and published by CRC Press. This book was released on 2016-04-19 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A critical technology in the science of contamination control, environmental monitoring is a technique that provides important data on the quality of a process, processing environment, and final product, which can aid scientists in identifying and eliminating potential sources of contamination in cleanrooms and controlled environments. In response

Download or read book Biocontamination Control for Pharmaceuticals and Healthcare written by Tim Sandle and published by Academic Press. This book was released on 2018-11-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocontamination Control for Pharmaceuticals and Healthcare outlines a biocontamination strategy that tracks bio-burden control and reduction at each transition in classified areas of a facility. This key part of controlling risk escalation can lead to the contamination of medicinal products, hence necessary tracking precautions are essential. Regulatory authorities have challenged pharmaceutical companies, healthcare providers, and those in manufacturing practice to adopt a holistic approach to contamination control. New technologies are needed to introduce barriers between personnel and the environment, and to provide a rapid and more accurate assessment of risk. This book offers guidance on building a complete biocontamination strategy. - Provides the information necessary for a facility to build a complete biocontamination strategy - Helps facilities understand the main biocontamination risks to medicinal products - Assists the reader in navigating regulatory requirements - Provides insight into developing an environmental monitoring program - Covers the types of rapid microbiological monitoring methods now available, as well as current legislation

Download or read book Guidelines for Safe Handling of Powders and Bulk Solids written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powders and bulk solids, handled widely in the chemical, pharmaceutical, agriculture, smelting, and other industries present unique fire, explosion, and toxicity hazards. Indeed, substances which are practically inert in consolidated form may become quite hazardous when converted to powders and granules. The U.S. Chemical Safety and Hazard Investigation Board is currently investigating dust explosions that occured in 2003 at WestPharma, CTA Acoustics, and Hayes-Lemmerz, and is likely to recommend that companies that handle powders or whose operations produce dust pay more attention to understanding the hazards that may exist at their facility. This new CCPS guidelines book will discuss the types of hazards that can occur in a wide range of process equipment and with a wide range of substances, and will present measures to address these hazards.

Download or read book Design in Modular Construction written by Mark Lawson and published by CRC Press. This book was released on 2014-02-24 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modular construction can dramatically improve efficiency in construction, through factory production of pre-engineered building units and their delivery to the site either as entire buildings or as substantial elements. The required technology and application are developing rapidly, but design is still in its infancy. Good design requires a knowled

Download or read book Biopharmaceutical Manufacturing written by Gary Gilleskie and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-09-07 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopharmaceuticals, medicines made by or from living organisms (including cells from living organisms), are extremely effective in treating a broad range of diseases. Their importance to human health has grown significantly over the years as more biopharmaceutical products have entered the market, and now the biggest selling drugs in the world are biopharmaceuticals. Biopharmaceutical Manufacturing: Principles, Processes and Practices provides concise, comprehensive, and up-to-date coverage of biopharmaceutical manufacturing. Written in a clear and informal style, the content has been influenced by the authors’ substantial industry experience and teaching expertise. That expertise enables the authors to address the many questions posed over the years both by university students and professionals with experience in the field. Consequently, the book will appeal both to undergraduate or graduate students using it as a textbook and specialized industry practitioners seeking to understand the big picture of biopharmaceutical manufacturing. This book:

Download or read book Sterilisation of Polymer Healthcare Products written by Wayne J. Rogers and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sterilisation has always been challenging but sterilisation of healthcare products and polymers, especially together is an even greater challenge - how do you sterilise without adversely affecting the end use or the end user? This book discusses all the sterilisation methods used for polymeric healthcare products both traditional and new.

Download or read book Good Quality Practice GQP in Pharmaceutical Manufacturing A Handbook written by Jordi Botet and published by Bentham Science Publishers. This book was released on 2015-09-28 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical manufacturing can be viewed as a supply chain which spans from the production and purchase of the starting and packaging materials through the manufacture of dosage forms until the safe reception of the finished product by the patient. The entire chain comprises of several processes: auditing, materials purchase (procurement), production, storage, distribution, quality control, and quality assurance. The quality standard for pharmaceutical production is ‘current good manufacturing practice (CGMP)’‘, which is applied within the frame of a pharmaceutical quality system (PQS). This implementation, however, requires a scientific approach and has to take into account several elements such as risk assessment, life cycle, patient protection, among other factors. Hence, pharmaceutical manufacturing is a complex subject in terms of regulation, given the technical and managerial requirements. This comprehensive handbook describes CGMP for new professionals who want to understand and apply the elements which build up pharmaceutical quality assurance. The book gives details about basic quality control requirements (such as risk management, quality hazards and management systems, documentation, clean environments, personnel training) and gives guidelines on regulatory aspects. This is an ideal handbook for undergraduates studying pharmaceutical or industrial manufacturing and supply chains as well for entrepreneurs and quality control professionals seeking to learn about CGMP standards and implementing quality assurance systems in the pharmaceutical sector.

Download or read book Handbook of Pharmaceutical Manufacturing Formulations written by Safaraz K. Niazi and published by CRC Press. This book was released on 2016-04-19 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: No other area of regulatory compliance receives more attention and scrutiny by regulatory authorities than the regulation of sterile products, for obvious reasons. With the increasing number of potent products, particularly the new line of small protein products, joining the long list of proven sterile products, the technology of manufacturing ster

Download or read book Clean Room Technology in ART Clinics written by Sandro C. Esteves and published by CRC Press. This book was released on 2016-11-18 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regulatory agencies worldwide have issued directives or such requirements for air quality standards in embryology laboratories. This practical guide reviews the application of clean room technology or controlled environments specifically suited for Assisted Reproductive Technology (ART) Units. Its comprehensive coverage includes material on airborne particles and volatile organic compounds, including basic concepts, regulation, construction, materials, certification, clinical results in humans, and more.

Download or read book Aerosol Measurement written by Pramod Kulkarni and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 1497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerosol Measurement: Principles, Techniques, and Applications Third Edition is the most detailed treatment available of the latest aerosol measurement methods. Drawing on the know-how of numerous expert contributors; it provides a solid grasp of measurement fundamentals and practices a wide variety of aerosol applications. This new edition is updated to address new and developing applications of aerosol measurement, including applications in environmental health, atmospheric science, climate change, air pollution, public health, nanotechnology, particle and powder technology, pharmaceutical research and development, clean room technology (integrated circuit manufacture), and nuclear waste management.

Download or read book Medical Device written by Rommel Garcia and published by Xlibris Corporation. This book was released on 2017-06-06 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is meant to be a guide to all who want to learn about a highly regulated industry. My approach is to give you, the reader, an example of a fictitious device, and we will take it from a conceptual idea all the way to launch and beyond. My intention is to incorporate the best experiences that I and other contributors have had into this book and convert them into laymans terms for those who are in need. These experiences can and will be indispensable to beginners and professionals alike who are trying their hand in the medical device industry and to those who have not been out of their silo to help see how each of the systems relate to each as a whole. However, it should be noted that the contents of this book should be taken only as information and is not intended to demonstrate how companies can be in compliance. In some instances, there are multiple ways to go through the maze of regulations that are documented and made by agencies because the regulations are pretty much made and designed to be flexible and high level so that companies can adopt their systems, which are solely designed for their purposes. Therefore, this book will try to avoid complicated words and complex technical details of engineering and statistics. This book will strive to be an embodiment of the honest-to-goodness, everyday experiences and issues that folks experience while working in the medical device industry.