Download or read book Clean Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2019-07-18 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the available technologies that can be employed to reduce energy consumption and greenhouse emissions in the steel- and ironmaking industries. Ironmaking and steelmaking are some of the largest emitters of carbon dioxide (over 2Gt per year) and have some of the highest energy demand (25 EJ per year) among all industries; to help mitigate this problem, the book examines how changes can be made in energy efficiency, including energy consumption optimization, online monitoring, and energy audits. Due to negligible regulations and unparalleled growth in these industries during the past 15-20 years, knowledge of best practices and innovative technologies for greenhouse gas remediation is paramount, and something this book addresses. Presents the most recent technological solutions in productivity analyses and dangerous emissions control and reduction in steelmaking plants; Examines the energy saving and emissions abatement efficiency for potential solutions to emission control and reduction in steelmaking plants; Discusses the application of the results of research conducted over the last ten years at universities, research centers, and industrial institutions.
Download or read book Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2016-09-02 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.
Download or read book Hydrogen Assisted Direct Reduction of Iron Oxides written by Pasquale Cavaliere and published by Springer Nature. This book was released on 2022-04-21 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the main approaches to produce and synthesize iron and steel through hydrogen-based technologies. Depending on the processing route and on the energy demand, the best available techniques and the most forward-looking solutions are explained. The book is edited with the contribution representing a range of industries in order to evaluate the industrial feasibility of each selected technology. It presents the most efficient solutions applied by ironmaking and steelmaking factories all around the world.
Download or read book Operations and Basic Processes in Ironmaking written by José Ignacio Verdeja González and published by Springer Nature. This book was released on 2020-08-18 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores the production of pig iron, covering the first part of the steel production process, known as ironmaking. Divided into seven chapters, it discusses the following topics: raw materials for steel production (coking coal, iron ore, slag-forming agents and fluxes, scrap, ferroalloys and pre-reduced materials), the sintering process (used to prepare the burden for the blast furnace), the pelletizing process (used to agglomerate the fine iron ores), the production of coke (the main reductant in the ironmaking process), the production of iron by reduction with gas (an alternative to the blast furnace) and the production of pig iron in the blast furnace (which is used in more than 65% of steel production worldwide). Specially conceived for graduate and undergraduate courses, this book is based on more than 30 years of teaching experience in courses for undergraduates, graduates (master and Ph.D.) and industry professionals (technicians). It explores the recent trends in the iron- and steelmaking process (which might used in the future production of steel), and features 55 worked exercises and real-world problems to complement of the theoretical sections of the text.
Download or read book Ironmaking and Steelmaking written by Zushu Li and published by . This book was released on 2019 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel is a critical material in our societies and will remain an important one for a long time into the future. In the last two decades, the world steel industry has gone through drastic changes and this is predicted to continue in the future. The Asian countries (e.g. China, India) have been dominant in the production of steel creating global over-capacity, while the steel industry in the developed countries have made tremendous efforts to reinforce its global leadership in process technology and product development, and remain sustainable and competitive. The global steel industry is also facing various grand challenges in strict environmental regulation, new energy and materials sources, and ever-increasing customer requirements for high quality steel products, which has been addressed accordingly by the global iron and steel community. This Special Issue, "Ironmaking and Steelmaking", released by the journal Metals, published 33 high quality articles from the international iron and steel community, covering the state-of-the-art of the ironmaking and steelmaking processes. This includes fundamental understanding, experimental investigation, pilot plant trials, industrial applications and big data utilization in the improvement and optimization of existing processes, and research and development in transformative technologies. It is hoped that the creation of this special issue as a scientific platform will help drive the iron and steel community to build a sustainable steel industry.
Download or read book Ironmaking and Steelmaking written by Zushu Li and published by MDPI. This book was released on 2019-08-13 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel is a critical material in our societies and will remain an important one for a long time into the future. In the last two decades, the world steel industry has gone through drastic changes and this is predicted to continue in the future. The Asian countries (e.g. China, India) have been dominant in the production of steel creating global over-capacity, while the steel industry in the developed countries have made tremendous efforts to reinforce its global leadership in process technology and product development, and remain sustainable and competitive. The global steel industry is also facing various grand challenges in strict environmental regulation, new energy and materials sources, and ever-increasing customer requirements for high quality steel products, which has been addressed accordingly by the global iron and steel community. This Special Issue, “Ironmaking and Steelmaking”, released by the journal Metals, published 33 high quality articles from the international iron and steel community, covering the state-of-the-art of the ironmaking and steelmaking processes. This includes fundamental understanding, experimental investigation, pilot plant trials, industrial applications and big data utilization in the improvement and optimization of existing processes, and research and development in transformative technologies. It is hoped that the creation of this special issue as a scientific platform will help drive the iron and steel community to build a sustainable steel industry.
Download or read book Ironmaking and Steelmaking written by and published by . This book was released on 2011 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Operations and Basic Processes in Steelmaking written by Luis Felipe Verdeja González and published by Springer Nature. This book was released on 2021-03-24 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the operations and industrial processes related to the production of steel. The chapters cover the second part of the iron and steelmaking process, called steelmaking, presenting the stages of the process until obtaining the finished steel product in different formats for distinct applications. This book reports significant operating variables of the processes and basic operations of the steelmaking. The chapters contain numerous solved exercises conceptually supported on the thermodynamic and kinetic fundamentals of the production of steel from the pig iron in the Basic Oxygen Furnace (BOF) and the production of steel and ferroalloys in Electric Arc Furnaces (EAF). The thermal and mechanic fundamentals of the hot rolling operations and the mechanical fundamentals of the cold rolling, forming, and wire drawing to obtain different steel products are also reported. The book summarizes the strengths and uncertainties of steel as a structural material.
Download or read book Advances in Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Mdpi AG. This book was released on 2023-05-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, ironmaking and steelmaking have witnessed the incorporation of various new processes and technologies that can be operated and organized in different combinations depending on the properties of raw materials and the required quality of the final products. Indications from the steel industry and local and global government institutions suggest that the breakthrough technologies for decarbonization will be based on new fuels and energy vectors. For CO2-lean process routes, three major solutions have been identified: decarbonizing, whereby coal would be replaced by hydrogen or electricity in the hydrogen reduction or electrolysis of iron ore processes; the introduction of CCS technology; and the use of sustainable biomass. Today, hydrogen-based steelmaking is a potential low-carbon and economically attractive route, especially in countries where natural gas is cheap. By considering systems for increasing energy efficiency and reducing the environmental impact of steel production, CO2 emissions may be greatly reduced by hydrogen-based steel production if hydrogen is generated by means of carbon-free and renewable sources. Currently, the development of the hydrogen economy has received a great deal of attention in that H2 is considered a promising alternative to replace fossil fuels. Based on hydrogen, the "hydrogen economy" is a promising clean energy carrier for decarbonized energy systems if the hydrogen used is produced from renewable energy sources or coupled with carbon capture and storage (CCS) or nuclear energy.
Download or read book The Making Shaping and Treating of Steel written by United States Steel Corporation and published by Association of Iron & Steel Engineers. This book was released on 1985 with total page 1634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IISI Study on Clean Steel written by and published by . This book was released on 2004 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Treatise on Process Metallurgy written by Roderick Guthrie and published by Elsevier. This book was released on 2024-03-12 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Process Metallurgy: Volume Three, Industrial Processes provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board. Provides the entire breadth of process metallurgy in a single work Includes in-depth knowledge in all key areas of process metallurgy Approaches the topic from an interdisciplinary perspective, providing broad range coverage on topics
Download or read book Advances in Processing Technology of Flat Steel Products APT FS 2024 written by Santosh Kumar and published by Allied Publishers. This book was released on 2024-09-12 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flat steel products are fundamental to modern manufacturing and construction, serving as crucial materials in a wide array of industries. From automotive components and household appliances to building structures and packaging materials, flat steel’s versatility and strength make it indispensable. The flat steel industry has seen numerous technological advancements that have enhanced product quality and production efficiency. Key developments include: · Advanced Coating Technologies · Precision Manufacturing · High-Strength and Specialty Steels · Sustainability Initiatives The advancements in flat steel products have had a profound impact on both industry and society. In the industrial realm, these products have enabled the creation of safer, more efficient, and more durable materials. The automotive industry’s use of high-strength steel, for example, has led to safer vehicles with improved fuel efficiency. On a societal level, the widespread use of flat steel products has contributed to improved living standards. Household appliances and infrastructure developments have enhanced everyday life by providing reliable and durable solutions. Additionally, the impact of flat steel products on the economy cannot be overstated; they support numerous jobs and contribute significantly to global trade.
Download or read book Physical Metallurgy and Heat Treatment of Steel written by José Ignacio Verdeja González and published by Springer Nature. This book was released on 2022-09-10 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the physical metallurgy of steels as well as the heat treatments used to improve the their properties. A full chapter is dedicated to the atmospheres in the steelmaking, including the implications of the own gases generated in the iron and steelmaking factories and how they could be applied in these treatments. This book is specially conceived for graduate and undergraduate courses, being the result of more than 30 years of teaching experience in courses for undergraduate, graduate (master and Ph. D.), and companies (technicians). The trends in the re-utilization of industrial gases in the iron and steelmaking process are discussed by the authors. Additionally, the book comprises 41 solved exercises, problems and case-studies, as a complement of the theoretical sections of the text. These exercises, problems, and case-studies are based on problems observed in the industrial practice.
Download or read book Theory and Methods of Metallurgical Process Integration written by Ruiyu Yin and published by Elsevier. This book was released on 2016-05-26 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Methods of Metallurgical Process Integration analyzes the basic elements and characteristics of steel manufacturing processes and operation, also proposing a theory of precise dynamic design and integration of steel plants. Following several case studies, a new generation steel manufacturing process is proposed. Through deep description and analysis of the dynamic operation of the steel manufacturing process, this book can help readers understand that the study of dynamic integration for the "mass-energy-time-space-information" during the steel manufacturing process has to be highly emphasized in order to further promote optimization of the steel manufacturing process and plant. - Extends the research methodology and future direction of the metallurgical process - Concentrates on the study of the physical essence and the running rules of the dynamic operation of the steel manufacturing process - Summarizes six rules for the dynamic operation of the steel manufacturing process for newly-built or existing steel plants, which provides useful guidance for engineering design, production technology, and production and technology management
Download or read book Air Pollution Aspects of Emission Sources Iron and Steel Mills written by Air Pollution Technical Information Center and published by . This book was released on 1972 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Ironmaking and Steelmaking Processes written by Iron and Steel Society of AIME. Process Technology Division and published by . This book was released on 1988 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt:
