Download or read book Circular Column Design Charts to Eurocode 2 written by Tan Kar Chun and published by Tan Kar Chun. This book was released on 2020-08-24 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides design chart for circular columns with common size from 300mm to 2400mm diameter. These data serve as quick reference for structural engineer to determine the size of columns, effectively aid in preliminary design and construction cost estimation.
Download or read book Designers Guide to EN 1992 1 1 Eurocode 2 Design of Concrete Structures written by Andrew W Beeby and published by Thomas Telford. This book was released on 2005-09-30 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applies to the design of building and civil engineering structures in plain, reinforced and pre-stressed concrete. The code (for convenience referred to as EC2) is written in several parts: EN 1992 - 1 - 1; EN 1992 - 1 - 2; EN 1992 - 2; and EN 1992 - 3.
Download or read book Charts for the Design of Circular Columns to BS 8110 written by W. G. Batchelor and published by . This book was released on 1989 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the design charts that had been included in CP 110 Part 3 but were omitted from BS 8110 when it was published in 1985. The charts cover the use of those grades of concrete and steel recommended in the standard. It also includes four additional charts which can be used for any grade of concrete or steel, a particularly useful reference when checking existing structures and when designing for overseas work.
Download or read book Introduction to Eurocode 2 written by A. Alexandrou and published by CRC Press. This book was released on 1997-10-16 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and practical introduction to the new European Code of Practice for Design of Concrete Structures, EC2. This book guides the reader through the background to the Eurocodes and explains the main differences between them and the equivalent Standard Codes of Practice. An Introduction to Eurocode 2 will be invaluable for engineers who need to learn about the new code and how it can be used effectively in design.
Download or read book Worked Examples for the Design of Concrete Structures to Eurocode 2 written by Tony Threlfall and published by CRC Press. This book was released on 2013-06-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical design guide illustrates through worked examples how Eurocode 2 may be used in practice. Complete and detailed designs of six archetypal building and public utility structures are provided. The book caters to students and engineers with little or no practical experience of design, as well as to more experienced engineers who may be u
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1995 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designers Handbook to Eurocode 2 written by A. W. Beeby and published by Thomas Telford. This book was released on 1995 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook aims to assist designers to apply Eurocode 2 by explaining the background to, and the intention of, the provisions indicating the most convenient design approaches, comparing the provisions with those in BS 8110 presenting design aids, charts and examples.
Download or read book Eurocode 2 Design Data for Reinforced Concrete Columns written by Kar Chun Tan and published by Springer. This book was released on 2019-03-27 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written to facilitate column sizing and reinforcement design for structural engineers. It arranges the design data in a clearly structured manner, and provides quick and easy ways for engineers to compare the feasibility of multiple alternatives (various column sizes and reinforcement configurations). With the help of this book, engineers can rapidly produce outputs for architects, which the latter can incorporate into their architectural layout plans. These outputs can also benefit quantity surveyors, especially for costing purposes, and help avoid careless design errors. The book is chiefly intended for structural engineers who implement Eurocode 2 for reinforced concrete design. To gain the most from it, readers should possess a basic understanding of column design, e.g. the stresses and forces produced in columns and their reinforcements when subjected to axial load and bending moment. However, the book also provides explanatory notes for the design data tables, allowing them to be used without prior background knowledge.
Download or read book Worked Examples for the Design of Concrete Structures to Eurocode 2 written by Tony Threlfall and published by CRC Press. This book was released on 2013-06-20 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical design guide illustrates through worked examples how Eurocode 2 may be used in practice. Complete and detailed designs of six archetypal building and public utility structures are provided. The book caters to students and engineers with little or no practical experience of design, as well as to more experienced engineers who may be unfamiliar with Eurocode 2. Chapter 1 provides an introduction to the Structural Eurocodes, with particular reference to actions on structures. Chapter 2 describes the principles, requirements and methods used for the design of members. This is followed by worked examples for the following structures: A multi-storey office building with three forms of floor construction A basement to the office building with three types of foundations A free-standing cantilever earth-retaining wall A large underground service reservoir An open-top rectangular tank on an elastic soil An open-top cylindrical tank on an elastic soil In addition to the design of all the elements, the analysis of each structure is fully explained. This applies particularly to the design of the basement, and the tanks bearing on elastic soils, for which specially derived tables are included in appendices to the book. The calculations are complemented by reinforcement drawings in accordance with the recommendations in the third edition (2006) of the Standard method of detailing structural concrete, with commentaries on the bar arrangements. This book can be used as a stand-alone publication, or as a more detailed companion to Reynolds’s Reinforced Concrete Designer’s Handbook, now in its 11th edition. The comprehensive treatment of the designs, and the variety of structures considered, make this a unique and invaluable work.
Download or read book Design of Steel Concrete Composite Structures Using High Strength Materials written by J.Y. Richard Liew and published by Woodhead Publishing. This book was released on 2021-08-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members Suggests a unified approach to designing columns with normal- and high-strength steel and concrete
Download or read book Design of Structural Elements written by C. Arya and published by CRC Press. This book was released on 2002-11-21 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this popular textbook provides, in a single volume, an introduction to the design of structural elements in concrete, steel, timber and masonry. Part One explains the principles and philosophy of design, basic techniques, and structural concepts. Designing in accordance with British Standard codes of practice follows in Part Two, with numerous diagrams and worked examples. In Part Three the Eurocodes are introduced, and their main differences to British codes are explained. Comprehensively revised and updated to comply with the latest British Standards and Eurocodes, the second edition also features a new section on the use and design of composite materials. With an accompanying solutions manual available online, Design of Structural Elements is the ideal course text for students of civil and structural engineering, on degree, HNC and HND courses.
Download or read book Structural Design of Buildings written by Feng Fu and published by Emerald Group Publishing. This book was released on 2024-07-12 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design of Buildings: Elemental Design is the essential reference for all structural engineers involved in the design of buildings and other structures. The book forms part of the Structural Design of Buildings series and focuses on the introduction of building elements and materials.
Download or read book Design of Reinforced Concrete Sections Under Bending and Axial Forces written by Helena Barros and published by Springer Nature. This book was released on 2022-01-03 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains auxiliary calculation tools to facilitate the safety assessment of reinforced concrete sections. Essential parameters in the design to the ultimate limit state of resistance such as the percentage of reinforcement and the position of the neutral axis in concrete cross-sections, as well as the control of the maximum stresses in service limit states are provided by these tools. A set of tables, charts and diagrams used to design cross-sections of reinforced and prestressed concrete structures are supplied. The most current beams and columns cross-sections namely, rectangular, circular and T-sections are considered. These tools have been prepared in line with the provisions of the new European regulations, with particular reference to Eurocode 2 – Design of Concrete Structures. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.
Download or read book Tubular Structures IX written by Puthli and published by CRC Press. This book was released on 2001-01-01 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference for architects and engineers, this work covers themes on architecture, case studies, and the application and strengths of tubular beams.
Download or read book Tubular Structures XII written by Z.Y. Shen and published by CRC Press. This book was released on 2008-09-11 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presentation of the latest scientific and engineering developments in the field of tubular steel structures. Covers key and emerging subjects of hollow structural sections, such as: static and fatigue behaviour of connections/joints, concrete filled hollow sections and composite tubular members, offshore structures, earthquake resistance,
Download or read book Concrete Column Design Charts for Combined Axial Load and Bending written by William N. Mason and published by . This book was released on 1953 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Concrete Design written by W.H. Mosley and published by Red Globe Press. This book was released on 2012-04-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this text is to provide a straightforward introduction to the principles and methods of design for concrete structures. The theory and practice described are of fundamental nature and will be of use internationally.