Download or read book CIM 10 Analysis and Decisions written by BPP Learning Media and published by BPP Publishing. This book was released on 2012-06-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Official Educational Publisher for CIM, all BPP Learning Media materials are written or reviewed by a CIM examiner or a CIM recommended tutor and all books have a CIM professional body review for assurance on syllabus coverage.
Download or read book Future Generation Grids written by Vladimir Getov and published by Springer Science & Business Media. This book was released on 2006-10-12 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CoreGRID Network of Excellence (NoE) project began in September 2004. Two months later, in November 2004, the first CoreGRID Integra tion Workshop was held within the framework of the prestigious international Dagstuhl seminars. CoreGRID aims at strengthening and advancing long-term research, knowledge transfer and integration in the area of Grid and Peer-to- Peer technologies. CoreGRID is a Network of Excellence - a new type of project within the European 6th Framework Programme, to ensure progressive evolution and durable integration of the European Grid research community. To achieve this objective, CoreGRID brings together a critical mass of we- established researchers and doctoral students from forty-two institutions that have constructed an ambitious joint programme of activities. Although excellence is a goal to which CoreGRID is committed, durable integration is our main concern. It means that CoreGRID has to carry out activ ities to improve the effectiveness of European research in Grid by coordinating and adapting the participants' activities in Grid research, to share resources such as Grid testbeds, to encourage exchange of research staff and students, and to ensure close collaboration and wide dissemination of its results to the international community. Organising CoreGRID Integration Workshops is one of the activities that aims at identifying and promoting durable collaboration between partners involved in the network.
Download or read book CIM Justification and Optimisation written by Sev V Nagalingam and published by CRC Press. This book was released on 2020-11-26 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a justification and optimisation model that is complete enough to capture the important features required for a complex decision-making environment for computer integrated manufacturing investment analysis. The model provides facilities to quantify qualitative attributes.
Download or read book Joint Commission International Accreditation Standards for Home Care written by Joint Commission International and published by Joint Commission Resources. This book was released on 2012 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual includes JCI's updated requirements for home care organizations effective 1 July 2012. All of the standards and accreditation policies and procedures are included, giving home care organizations around the world the information they need to pursue or maintain JCI accreditation and maximize patient-safe care. The manual contains Joint Commission International's (JCI's) standards, intent statements, and measurable elements for home care organizations, including patient-centered and organizational requirements.
Download or read book Uncertainty Modeling in Knowledge Engineering and Decision Making Proceedings of the 10th International Flins Conference written by Cengiz Kahraman and published by World Scientific. This book was released on 2012 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: FLINS, originally an acronym for Fuzzy Logic and Intelligent Technologies in Nuclear Science, is now extended to Computational Intelligence for applied research. The contributions to the 10th of FLINS conference cover state-of-the-art research, development, and technology for computational intelligence systems, both from the foundations and the applications points-of-view.
Download or read book Recent Progress in Computational Sciences and Engineering 2 vols written by Theodore Simos and published by CRC Press. This book was released on 2019-05-07 with total page 1600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume brings together selected contributed papers presented at the International Conference of Computational Methods in Science and Engineering (ICCMSE 2006), held in Chania, Greece, October 2006. The conference aims to bring together computational scientists from several disciplines in order to share methods and ideas. The ICCMSE is unique in its kind. It regroups original contributions from all fields of the traditional Sciences, Mathematics, Physics, Chemistry, Biology, Medicine and all branches of Engineering. It would be perhaps more appropriate to define the ICCMSE as a conference on computational science and its applications to science and engineering. Topics of general interest are: Computational Mathematics, Theoretical Physics and Theoretical Chemistry. Computational Engineering and Mechanics, Computational Biology and Medicine, Computational Geosciences and Meteorology, Computational Economics and Finance, Scientific Computation. High Performance Computing, Parallel and Distributed Computing, Visualization, Problem Solving Environments, Numerical Algorithms, Modelling and Simulation of Complex System, Web-based Simulation and Computing, Grid-based Simulation and Computing, Fuzzy Logic, Hybrid Computational Methods, Data Mining, Information Retrieval and Virtual Reality, Reliable Computing, Image Processing, Computational Science and Education etc. More than 800 extended abstracts have been submitted for consideration for presentation in ICCMSE 2005. From these 500 have been selected after international peer review by at least two independent reviewers.
Download or read book CIM Computer Integrated Manufacturing written by August-Wilhelm Scheer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Integrated Manufacturing (CIM) is the computerized handling of integrated operational processes between production planning and control, design, process planning, production, and quality assurance. The consistent application of information technology, along with modern manufacturing techniques and new organizational procedures, opens up great potential for rationalization by speeding up processes, thereby reducing stocks and improving product structure and delivery times. Following a comprehensive justification of the CIM integration principle, this book discusses the current state of applications and new demands arising from the integration principle as applied to the individual CIM components. The interfaces between business and technical information processing are considered in detail. The main emphasis, however, is on strategies for realization and implementation based on concrete experi- ence. The "Y-CIM information management" model, developed and tested at the author's institute, is presented as a procedural method for implementing CIM and demonstrated using up-to-date examples. In addition to the procedure for developing a CIM strategy, concrete sub-projects are developed which are directed at specific sector or enterprise structures. The survey of further CIM developments including design stage cost estimation, use of expert systems and inter-company process chains have proved to be effective CIM components since the first edition of this book and are now treated in the main text. Six German and five American industrial implementations are presented to illustrate the diverse areas of emphasis in the implementation sequence, and to indicate how CIM can be realized with currently available data processing tools.
Download or read book Advancement of Intelligent Production written by E. Usui and published by Elsevier. This book was released on 2016-07-29 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we move towards the 21st century, industries are compelled to turn from "high productivity and high precision" to "more intelligent and more human-oriented technology". This volume presents the existing state of the art of production/precision engineering and illuminates areas in which future work may proceed.
Download or read book Binary Decision Diagrams and Extensions for System Reliability Analysis written by Liudong Xing and published by John Wiley & Sons. This book was released on 2015-06-15 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in science and technology have made modern computing and engineering systems more powerful and sophisticated than ever. The increasing complexity and scale imply that system reliability problems not only continue to be a challenge but also require more efficient models and solutions. This is the first book systematically covering the state-of-the-art binary decision diagrams and their extended models, which can provide efficient and exact solutions to reliability analysis of large and complex systems. The book provides both basic concepts and detailed algorithms for modelling and evaluating reliability of a wide range of complex systems, such as multi-state systems, phased-mission systems, fault-tolerant systems with imperfect fault coverage, systems with common-cause failures, systems with disjoint failures, and systems with functional dependent failures. These types of systems abound in safety-critical or mission-critical applications such as aerospace, circuits, power systems, medical systems, telecommunication systems, transmission systems, traffic light systems, data storage systems, and etc. The book provides both small-scale illustrative examples and large-scale benchmark examples to demonstrate broad applications and advantages of different decision diagrams based methods for complex system reliability analysis. Other measures including component importance and failure frequency are also covered. A rich set of references is cited in the book, providing helpful resources for readers to pursue further research and study of the topics. The target audience of the book is reliability and safety engineers or researchers. The book can serve as a textbook on system reliability analysis. It can also serve as a tutorial and reference book on decision diagrams, multi-state systems, phased-mission systems, and imperfect fault coverage models.
Download or read book A Paraconsistent Decision Making Method written by Fábio Romeu de Carvalho and published by Springer. This book was released on 2018-06-13 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a novel decision-making support system based on paraconsistent annotated evidential logic, which directly handles imprecise, incomplete and contradictory data. The authors offer insights into areas such as engineering and biomedicine, as well as related fields. Decision analysis is useful in making choices when the consequences of actions are uncertain, like in business administration, where it assists in making investment decisions, and in health care, Decision analysis is also valuable when the possible actions may lead to conflicting consequences. A fundamental tenet of decision analysis is that even though the available information is incomplete, a decision must be made. Thus, analyses often contain assumptions about or estimates of missing data. The contribution that this method can provide to professionals and companies has significant relevance in terms of the impact of information systems on productivity and quality of the companies; the lack of training companies for proper planning and management of information systems; and the need for interdisciplinary treatment of several sectors of almost all related scientific areas. This book is a valuable resource for professionals seeking a competitive edge in their performance.
Download or read book Design of Work and Development of Personnel in Advanced Manufacturing written by Gavriel Salvendy and published by John Wiley & Sons. This book was released on 1994-03-31 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a framework of worldwide problems, issues and solutions relevant to the design of work and development of personnel in advanced manufacturing systems. Focuses on people and their central roles in automated production resulting from rapid computer-based integration. Addresses social, technical, organizational, managerial and ecological design issues relating to manufacturing success and the business objectives of a firm. Provides solutions to problems of integrating the human element into the production process.
Download or read book Encyclopedia of Decision Making and Decision Support Technologies written by Adam, Frederic and published by IGI Global. This book was released on 2008-04-30 with total page 1019 pages. Available in PDF, EPUB and Kindle. Book excerpt: As effective organizational decision making is a major factor in a company's success, a comprehensive account of current available research on the core concepts of the decision support agenda is in high demand by academicians and professionals. Through 110 authoritative contributions by over 160 of the world's leading experts the Encyclopedia of Decision Making and Decision Support Technologies presents a critical mass of research on the most up-to-date research on human and computer support of managerial decision making, including discussion on support of operational, tactical, and strategic decisions, human vs. computer system support structure, individual and group decision making, and multi-criteria decision making.
Download or read book Intelligent Manufacturing Structure Control and Integration written by Eugene Ralph Fisher and published by . This book was released on 1990 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Decision Support Systems written by Hamid R. Parsaei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, a tremendous growth in the popularity and applications of computers in manufacturing has occurred. Computer aided design, computer-aided manufacturing, flexible manufacturing systems, group technology and many others are considered by many manufacturing executives as the most promising technologies and philosophies that, if successfully implemented, can reduce costs and enable the US manufacturing companies to become more competitive in the global market. In the computer-integrated manufacturing environ ment, the decision processes are often more involved. The decision makers are frequently required to have access to a vast amount of data to support and analyze their complex decision problems at strategic and tactical levels. Decision support systems are often referred to as computer-based information technologies that allow the decision makers to interactively communicate and solve the decision problems. Manufacturing Decision Support Systems is intended to report the latest developments and address the central issues in this area. This volume consists of 14 refereed chapters, written by leading researchers from academia and industry.
Download or read book Weekly Summary of NLRB Cases written by United States. National Labor Relations Board. Division of Information and published by . This book was released on 1985 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Professionalizing Teacher Education written by Claire Wyatt-Smith and published by Taylor & Francis. This book was released on 2022-06-30 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a significant contribution to conversations about teacher quality and graduate readiness for teaching. It presents empirical insights into how a multidisciplinary team of researchers, teacher educators, and policy personnel mobilized for collective change in a standards-driven reform initiative. The insights are research-informed and critically relevant for anyone interested in teacher preparation and credentialing. It gives an account of a bold move to install a collaborative culture of evidence-informed inquiry to professionalize teacher education. The centerpiece of the book is the use of standards and evidence to show the quality of graduates entering the teaching workforce. The book presents, for the first time, a model of online cross-institutional moderation as benchmarking to generate large-scale evidence of the quality of teacher education. The book also introduces a new conceptualization of a feedback loop using summative data for accountability and formative data to inform curriculum review and program renewal. This book offers the insider story of the conceptualization, design, and implementation of the Graduate Teacher Performance Assessment (GTPA). It involves going to scale with a large group of Australian universities, government agencies, and schools, and using participatory approaches to advance new thinking about evidence-informed inquiry, cross-institutional moderation, and innovative digital infrastructure. The discussion of competence assessment, standards, and change processes presented in the book has relevance beyond teacher education to other professions.
